How to create BI Publsiher Usage Reports?
We have several developers/users using BI Publisher as a reporting tool. We would like to create usage report such that we can identify, How many times a particular report was requested? How many users request a particular report? How Long a report takes to render?...etc.... We are using File-Based Repository for our reports and Version 10.1.3.4 is our current version of BI Publisher.
Is it possible to create a usage reports? If so, How we can do that?
Thanks in advance.
Hi,
Please refer threads:
Multiple Finished Goods in a Single Production Order
Wastage Management in Production Process
Thanks & Regards,
Nagarajan
Similar Messages
-
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
How to create radio button in reports
Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
NagendraHi Nagendra,
But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'P_RAD2'.
SCREEN-INVISIBLE = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
Hi All,
Suppose I have table, whose structure changes frequently on daily basis.
For eg. desc my_table gives you following column name on Day 1
SQL > desc my_table;
Output
Name
Age
Phone
On Day 2, two more columns are added, viz, Address and Salary.
SQL > desc my_table;
Output
Name
Age
Phone
Address
Salary
Now I want to create an Dynnamic RTF report which would fetch data from ALL columns from my_table on daily basis. For that I have defined a concurrent program with XML as output type and have attached a data template/data definition to it which takes in XML as input and gives final output of conc program in EXCEL layout. I am able to do this for constant number of columns, but dont know how to do it when the number of columns to be displayed changes dynamically.
For Day 1 my XML file should be like this.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
</group>
</dataStructure>
</dataTemplate>
And my Day 1, EXCEL output from RTF template should be like this.
Name Age Phone
Swapnill 23 12345
For Day 2 my XML file should be like this. With 2 new columns selected in SELECT clause.
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="XYZ" description="iExpenses Report" Version="1.0">
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
SELECT Name
,Age
,Phone
,Address
,Salary
FROM my_table
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_my_table" source="Q2">
<element name="Name" value="Name" />
<element name="Age" value="Age" />
<element name="Phone" value="Phone" />
<element name="Address" value="Address" />
<element name="Salary" value="Salary" />
</group>
</dataStructure>
</dataTemplate>
And my Day 2, EXCEL output from RTF template should be like this.
Name Age Phone Address Salary
Swapnill 23 12345 Madrid 100000
Now, I dont know below things.
Make the XML dynamic as in on Day 1 there must be 3 columns in the SELECT statement and on Day 2, 5 columns. I want to create one dynamic XML which should not be required to be changed if new columns are added in my_table. I dont know how to create this query and also create their corresponding elements below.
Make the RTF template dyanamic as in Day1 there must 3 columns in EXCEL output and on Day 2, 5 columns. I want to create a Dynamic RTF template which would show all the columns selected in Dynamic XML.I dont know how the RTF will create new XML tags and how it will know where to place it in the report. Means, I can create RTF template on Day 1, by loading XML data for 3 columns and placing 3 XML tags in template. But how will it create and place tags for new columns on Day 2?
Hope, you got my requirement, its a challenging one. Please let me know how I can implement the required solution using RTF dynamically without any manual intervention.
Regards,
Swapnil K.
Message was edited by: SwapnilKHi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K. -
How to create Status in ALV reports?
Hi experts,
I need to create a status in a alv report. but i am not getting how to create it. i have declared a variable type slis_formname. and appended the events with it. now how to create the status in form.answers will be rewarded.
Thanks in advance,
RamanaHello Venkat,
Copy the standard pf status of the ALV in SE41 and do the following.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS LIKE LINE OF IT_EVENTS.
REFRESH: IT_EVENTS.
CLEAR: WA_EVENTS,IT_EVENTS.
WA_EVENTS-NAME = 'PF_STATUS_SET'.
WA_EVENTS-FORM = 'STATUS'.
APPEND WA_EVENTS TO IT_EVENTS .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = IT_VARIANT-REPORT
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
I_SAVE = 'A'
IS_VARIANT = IT_VARIANT
IT_SORT = IT_SORT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = G_T_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
FORM status *
FORM STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING RT_EXTAB.
ENDFORM.
If useful reward.
Vasanth -
How to create a Group Above report using APEX
I want to create a Group above report with more that one group using APEX. Is it possible to generate such a report using APEX. If so kindly let me know how to go about creating a Group above report with more than one group.
Hello Srini,
Thank you very much for the reply but I'm not into OBIEE... I want the required query to be processed and the output to be shown in xml layout to load into RTF document. The rest I can manage.. but please let me know how to get the .xml output with out using the report builder or the apps environment(concurrent prg submission)..
Please let me know if any... urgent
Thanks in advance
Krishna -
How to create a matrix like report with description column
Hi,
currently i have two tables - one describing a job and another describing the stock. it is a simple relation where a job uses stock.
i join job and stock using stock_code. there are three categories of stock - namely envelope, insert, stationary.
i wish to create a cross tab report - basically i would like it to look like
jobname, envelope, stationary, insert
abc, e1, s1, i1
, ,s2,i2
def, e2,s3,i4
, e3, , i5
basically for each job i would like to place the stock code under envelope, stationary, or insert based on what type of stock it is. i can do this in sql, however, i get left with blank spaces.
i do this by
select
"FILE_PARAMETER"."FILE_NAME" as "FILE_NAME",
"CATEGORY",
"STOCK"."STOCK_CODE" as "STOCK_CODE",
decode(upper("CATEGORY"), 'LASER', "STOCK_CODE", '') "LASER",
decode(upper("CATEGORY"), 'ENVELOPE', "STOCK_CODE", '') "ENVELOPE",
decode(upper("CATEGORY"), 'INSERT', "STOCK_CODE", '') "INSERT",
decode(upper("CATEGORY"), 'INSERT',"STOCK"."DESCRIPTION",'') "DESCRIPTION"
from
"FILE_PARAMETER" "FILE_PARAMETER",
"JOB_OVERVIEW" "JOB_OVERVIEW",
"STOCK" "STOCK"
where
"FILE_PARAMETER"."FILE_NAME"="JOB_OVERVIEW"."AP_JOB_CODE"
and "FILE_PARAMETER"."SCODE"="STOCK"."STOCK_CODE"
ORDER BY "FILE_PARAMETER"."FILE_NAME", "CATEGORY"
unfortunately this doesn't give me exactly the output i want. i would like it to show the first piece of stock in each category on the first line, and each subsequent stock on the line after that for each job group. my solution at the moment will put the stock in the corresponding stock category column but i have been unable to find a solution to removing the blank space.
i have created the matrix report in developer and it can do what i want, however, it will not show the description for insert only. the way i have grouped it, it wants to show it all, and being a reports newbie i have no idea how to fix that
any solutions would be very much appreciated!This feature is supported in MS Access and known as CROSSTAB through TRANSFORM function.
In Oracle this exists but not in a elegant way as in MS.
You have addition function GROUP BY ROLLUP and CUBE and GROUP BY GROUPING SETS, available in 10g, which can help you.
Look in manuals and play with it! -
How to creat a summary of report with .txt
Hi All,
I want to creat a summary of report with .txt,and i have disabled the function about report generation in teststand.
i created a complex sequence,it include some sub-sequences,example:the uut is tested on three different temperatures and four different voltages conditon.So i have creat three sub-sequences (diffrent temperatures) include four steps (different voltages),then mainsequence invoke three sub-sequences to excute test.
i only want get the fail-step's summary with,include: fail-step's name,status
how to do?thanks a lot
Solved!
Go to Solution.You can use Parameters.Step.Name to get the failed step name. You can also use something like Parameters.Step.StepType.Name == "NI_MultipleNumericLimitTest" to filter different types of steps.
As far as finding the entire failure chain...
You can check RunState.CallStackDepth to see how many callers deep you are. Based on that information you can use RunState.Caller.Caller.(continued for however many callers deep you are).RunState.Step.Name or .Sequence.Name
So if the CallStackDepth is 1, you would only need to use one Caller. If it was 2, you would need to recursively use 1 Caller and then 2 Callers and so on.
CTA, CLA, MTFBWY -
How To Create ESR (Enterprise Support Report) ?
Hi All Experts and Consultants,
I'am a junior basis consultant @ my new company and Please read my problem and give me the solution.
I was commanded by my manager to create ESR (Enterprise Support Report). I still don't know to do this. Firstly, I have no problem with generating and download EWA report in Solman System. My senior at my previous company told me that creating ESR can be done in Solman by using T-Code DSWP. But after looking deeply into Tcode DSWP, I didn't see how to make it as I wanted.
My question is :
Is it true that creating ESR can be done on Solman System or do I have to create on another system?
How to do it? Kindly Please describe the steps..
I was told that EWA and ESR is different matter. I will be glad if you could help me.
Thank You and hopefully I didn't ask at wrong "room".
Regards,
GuswekaCheck these notes below to clarify how to create ESR reports.
1391968 Enterprise Support Report / PSLE Report - BI SelfService
1541883 Continuous Improvement Dashboard
1539529 Sending Solution Data from SAP Solution Manager to SAP -- A Practical Guide.
1321295 Enterprise Support Report
Check this documentation too service.sap.com/solutionmanager => Media Library => Documentation => Enterprise Support Report (EN) -
How to create TCode to a report program...?
<b>Hi all
How to create a transaction code to a report program,,
can any one give me in step-by-step procedure..
points will b rewarded for the exact answer....
Thanks,</b>
regards,
prashanthHi Prashanth,
Following are the steps for crating t-code for a report program:
1. Goto transaction SE93 and press create.
2. Give the transaction code to be created
3. Enter short text
4. Select the type of transaction to be created (based on ur requirements).
5. Enter screen number (1st screen to be displayed)
6. In GUI support, check all the checkbox
7. Save and activate.
You can also do this procedure by going to SE80, right click on program name->create transaction.
THanks
Vijay
PLZ Reward points if helpful -
How can we generate a usage report
Hi Friends,
As my application is going to live, for that i want to usage report.
how can we generate a usage reopts ?
Thanks in advanceHi,
Take a look at Usage Tracking; http://apex.oracle.com/pls/apex/f?p=44785:24:370475959673014::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:4152,2
Good Luck,
Daan Bakboord
http://obibb.wordpress.com -
How to create authorisation object for report
hi
experts..
hw can u create authorisation object for the custom report.
Thanks& Regards
SpandanaHi,
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Sy-SUBRC values
4 User has no authorization in the SAP System for
such an action. If necessary, change the user
master record.
8 Too many parameters (fields, values). Maximum
allowed is 10.
12 Specified object not maintained in the user
master record.
16 No profile entered in the user master record.
24 The field names of the check call do not match
those of an authorization. Either the
authorization or the call is incorrect.
28 Incorrect structure for user master record.
32 Incorrect structure for user master record.
36 Incorrect structure for user master record.
http://www.sap.ittoolbox.com/groups/technical-functional/sap-basis/please-how-to-create-an-authorization-object-386391 - 78k -
http://www.sap-abaprogram.blogspot.com/2007/11/what-is-use-of-
authorization-checks-to.html - 75k -
www.sapworld.hpg.ig.com.br/download/ab4query.pdf
with thanks,
Abaper. -
How to create new Custom XML Report without using Form Builder
Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
AbhiHi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode -
How to create multiple tabs of report in 1 crystal report file
Hi,
Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
If there is, could you give me help on this.
Thank you in advance.
RoseHi Rose,
I think we cant achive the same functionality in Crystal Report designer.
Regards,
Shweta
Maybe you are looking for
-
How to auto boot after shutting down bootcamp Windows?
I have an instructional lab of 30 20" imacs that are running dual-boot, 10.5 & XP SP3. They have bootpicker installed to simplify the selection of which OS to boot to and auto-select Windows at 60 sec. (This is for new computer users and English as a
-
Dear All, I have to create a report to display the data of open po based on payment term, GR stage (delivery status), delivery date and po issuance date. Can anyone please guide me how should i filter out the blocked po, deleted po and only display o
-
Can I install camera raw 7.1 to elements 9
can I install camera raw 7.1 to elements 9
-
Using BT SmartTalk from the US
It's possible to restrict the functionality of SmartTalk users on my account to not have access to International or mobile calls. I'm assuming that when in the US that calls to the UK are not treated as international. Am I correct in this assumption?
-
Can't select with Mouse or Trackpad
I use an ibook G4 mid 2005 and a blue tooth wireless mouse. Suddenly I can't select with the trackpad or mouse. I can move the cusor but I can't click on anything. Keyboard shortcuts still work. I have tried: restarting, resetting PMU, re-installing