How to create bootable USB when using spinrite

Dear Fellow Community Members
I hope you can help me here as I'm stumped on how to actually get spinrite to run as I'm stuck at the dos c:
I have a Thinkpad E530 on windows 7 OS.
Windows no longer boots because of numerous bad sectors on the HDD.
I want to retrieve/recover files which were created since the last backup.
A friend in the tech industry recommended 'spinrite' which I've purchased.
I've followed the instructions on the website (https://www.grc.com/sr/faq.htm) to create a bootable USB with doswin98 files loaded.
I didn't go through the config.sys step when creating the bootable USB because the PC no longer works.
When I boot the PC with the USB HDD up via F12 command/boot menu, I get the following:
Microsoft (R) windows 98
C:\> spinrite
Bad command or file name
C:\>
Can someone help me with the next step/commands to trigger spinrite to run? Or is there something I've missed?
Thanks in advance.

Hello and welcome,
Are you familiar with/comfortable with Linux? I can't help you with the Win 98 approach you're using, but I am able to boot a Spinrite img using grub2 and memdisk on a flash drive.
I just finished a rather long article (not fully proof-read yet) about bootable flash drives that includes booting Spinrite. It's much too long to post here so I'll link it: A FOB STORY: some notes on bootable flash drives
The Spinrite part of the article is sort of buried in the mess. If you're not comfortable with Linux and low-level stuff like installing a boot loader on a flash drive, it's probably not for you. Better to wait for help with the technique you're using.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

How to create bootable USB thumb drive from Lion on Mac Mini 2011?

Hello folks
Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
Greetings
Jocau

After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
OS X Lion: About Lion Recovery
Lion Internet Recovery
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
Source: Lion Recovery
It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

How to create bootable USB drive for a PC on a Mac?

So in short I have a full PC build and a copy of Windows 7, but no optical drive to run the Windows 7 disk on, so I'm going to need to boot from a USB and the only means I have of creating a bootable USB is my Macbook running Yosemite.
So my question is how do I go about doing this? Please tell me it's as easy as selecting 'Create a Windows 7 or later version install disk' in Bootcamp

On a Mac create an ISO from the DVD and put it in a folder. Run BCA (Bootcamp Assistant) and use it to create a USB2 which will contain both the ISO and BC drivers. Uncheck the last "Install/Remove..." option, if you do not intend to install Windows on Mac.
Macs have no read-write NTFS drivers (Apple provides a read-only drivers), so the partition on Macs created by BCA is FAT, which is converted by the Windows installer to NTFS.
Please also see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 and http://imgur.com/a/DuGxr#0.
The USB2 has an AutoUnattend.xml which will silently install BC drivers, but these drivers are intended for Macs to support Mac-specific hardware.

How to create bootable iso file from usb flash drive to install windows 7 on macbook early 2008

how to create bootable usb flash drive from iso file to install windows 7 on macbook early 2008

I would like to install windows on my mac because I am in engineering school and there a lot of programs I'd like to have on my computer that only run on windows. And yes I'd like to use bootcamp and I know there must be a way to install off a flash drive. Do you know of a way?

Create bootable usb flash memory

Hi,
ı have s10-3 ideapad, there is no dvd drive, how can ı create bootable usb flash memory?

Hi and welcome,
...you need a second computer to prepare .
a huge amount of sites describe that "how to prepare usb-drive" ...i picked from net examples for all systems ...
install windows from winsetupfromusb for XP
for Windows 7 USB drive Windows 7
for Ubuntu Unetbootin
and last but not least here in our knowledgebase for XP
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

S205 - Steps to create a bootable USB drive using One Key Recovery (OKR) for backup image.

Hi Guys,
I just got my new S205. I am wondering how to backup the Windows OS including all factory settings to a bootable USB drive using One Key Recovery (OKR) 7.0. Basically I am afriad one day, my harddrive is failed or if I want to replace harddrive, I can reimage the harddrive back to factory setting and its OS (win 7). Would you share with me on the steps to do so?
I opened the OKR software and click on "Create Recovery Disk" -> "Factory Default Setting Disk" and Next, I couldn't see my USB drive? any one knows why?
thanks in advance.
New S205 owner.

I was able to do this, but it required reconfiguration of the HDD in my S205 (320 GB hard drive).
I used the built-in Windows Disk Management tool to shrink the size of my C: drive to 56,320 MB. [To accomplish this, I had to disable hibernation, and disable the swap file on the C: drive; and then re-enabled both after the process was complete.] 56,320 MB is more than enough space for the OS and all of the programs that I have installed (including the Professional version of Microsoft Office).
I then increased the size of the D: drive to 233,614 MB.
You can use different drive sizes, of course, but the D: drive must be of adequate size for the backup image.
Once the HDD is reconfigured, you can use One Key Recovery to backup your C: drive to your D: drive. From there, it can be copied to a USB (or copied across the network, etc. ... I've done both). Yes, it is 2 steps, but it's really easy.

HT4889 I have accidentally created another account when using Migration Assistant to a new MBA. How do I now 'migrate' all the files from both accounts into one to save myself having two accounts, both of which are me? Help?

I have accidentally created another account when using Migration Assistant to a new MBA. I have read that I probably should not have skipped migration in the initial set up and the problem would have been avoided but, alas, here I am. Does anyone know how I can 'migrate' all the files from one of the accounts that has been created to the other, so then I can delete it and have a single user on the computer seeing as I am the only person using it? I have read starting again, if this is the way to go, where is the best place to start 'starting again'?

Yes definitely should see it but its not coming up (I don't think) when I log out of 2nd user and into the main account. Opening finder in the 2nd account, I can obviously find the public folder because thats where I dropped all the files, but when in the main account, it can't be found. The only public folder that comes up is the folder for that account (main account) and it does not display files I'm looking for. Frustrating....
EDIT: Have found it through a round-about way but all music and photo and movie etc files have a red stop sign disallowing them from being transferred. Can you guess what the next question will be?

How to solve power error when using USB camera adapter in your camera

Hello Everyone,
First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
Things you need:
Camera
USB camera adapter (Ginues Apple product)
Power bank (I'm using 8,400 mAh)
Dual USB Male to 5 Pin Mini USB Y Cable
Ipad
Procedure:
Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
'---------- Power Bank
Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
Then attach the USB2 to the power bank/portable charger to power it up.
your welcome

yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
No can do, Skippy!

How to create a USB recovery flash drive using recovery ISO image?

This “HowTo” provides information and instruction how to create a USB recovery media flash drive using the Toshiba recovery ISO image files or Toshiba Recovery discs (DVDs)
To create a USB recovery media flash drive, a USB flash drive with at least 16GB disk space is suggested (depends on the size of the ISO images or recovery discs).
Note: Since 2015 the ISO layout has changed and a different procedure must be processed to create the USB media. The new recovery media type can be identified by the names of the ISO files.
More info: http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

Yes, that article should apply to tablets.
But if your USB recovery drive does not get recognized then it must be corrupted - you should be able to format your disk and perhaps try to see if creating a Recovery device on other devices will make it recognizable on your tablet 2.

How to create a crystal Report using C# and SQL Server

Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advance

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

How to create a adobe ebook using livecycle desinger ES3 version?

How to create a adobe ebook using livecycle desinger ES3 version

LiveCycle Designer is used for designing Forms, not eBooks.
The requirements of designing a book (ebook or otherwise) are not going to be meet by LiveCycle. You need functions like pagination and indexing.
A better choice would be to use InDesign, or even a word processor like Microsoft Word, and convert to PDF when finished.
You can read more about eBooks and the Adobe Digitial Publishing Platforms here: http://www.adobe.com/digitalpublishing/ebook/
At the bottom of this webpage are Resources which may help you understand the requirements of digitial publishing.
Hope this helps,
-Michelle

How to create a modeless dialog using commandlink

i want to create a modelessdialog using commandlink. and my code is
<%@ page language="java" contentType="text/html; charset=UTF-8"
pageEncoding="UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<f:view>
<script language="Javascript1.2">
function modelesswin(){
window.showModelessDialog();
</script>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Insert title here</title>
</head>
<body>
<h:form>
<h:commandLink onclick="javascript:modelesswin('popup.html', 300, 300)" value="click"></h:commandLink>
</h:form>
</body>
</f:view>
</html>
when i click the buttonlink the dialog box is not in a stable state that is its will appear and within a second it will disappear .. can any one of them can suggest me how to create a modeless dialoge using commandlink or by jsf option button
regards
subramanian

If I had to guess (and I do :), the onclick is firing, bring up the dialog, but the commandLink causes a form submit, so the page is submitted. There is no action on the commandLink, so it's navigating back to the same page, causing it to refresh and your dialog to disappear. It would appear to me that you need a h:outputLink or simply <a href="# onclick="..." /"></a>

Ques;How do you secure imail when used being used in iweb. People can mess

How do you secure imail when used being used in iweb? People can mess w/my settings in iweb imail window.

What is iMail?
And what is an iWeb iMail window?
iWeb is part of iLife 06 which is an application used to create websites hosted on .Mac.
Are you referring to Apple's Mail application and webmail access using a browser such as Safari to access your .Mac account?
Which people can mess with what settings? You shouldn't allow anyone else to access your Mac when logged in to your account and home folder/directory. OS X was designed for multiple users of the same Mac with each regular user having their own computer login account (with or without admin privileges) and associated home folder/directory to store and access their data and settings for their login account only.

How to create bootable USB when using spinrite

Similar Messages

Maybe you are looking for