How to create Bread Crumb

Hi experts,
I want to display a bread crumb on top of the page, showing the navigated path. And if the User selects a link(previous visited page) the corresponding page have to be displayed.
I have a doubt, whether i have to use view-container UI element to embed the views, so that previous pages can be called/dislayed?
Im not clear how to proceed with Bread crumb. Can u help me with the procedure/steps to be followed for bread crumb.
Thanks in advance,
James...

Thanks Sarath,
But i dont know how to call a view inside a view inside a view-container at runtime(Dynamically changing a view in View-container). Can i have the code which is used to change the view inside the view-container at runtime.
Thanks in advance,
James...

Similar Messages

How do I create bread crumbs if I don't want to put all of the topics in the TOC?

Good Morning
I am trying to figure out how I can create bread crumbs for topics that I do not have in the Table of Contents. The reason is that if I put all of my topics in the TOC, it will end up a mile long!
I created an alphabet bar, where each of the letters is a hyperlink to a main page with addtional topics on each main page. For example, if the user clicks 'A' on the alphabet bar, the A List appears with a list of topics that begin with the letter A, like Active Directory. When user clicks on the Active Directory link, the Active Directory topic appears. However, when I look in the upper righthand corner for the bread crumb, it goes Home<Active Directory, and skips over the A LIst. What I want it to look like is Home>Passwords A-Z>A List>Active Directory.
So, in thinking about this, I thought I could somehow manually create the bread crumbs. But, everything I've read so far has referred to automatic creation of bread crumbs from the TOC, which as I mentioned, would end up making the TOC huge.
I've also looked for other ways to create the navigation bar (rather than using the method I've described above) in the event there is no way to manually create the breadcrumbs. I have seen what I wanted in another help database but I am completely unable to figure out how they did it.
Any help or suggestions are greatly appreciated!
Karen

Hi Karen
Unfortunately you will likely end up implementing either a totally manual system (meaning you just add a line at the top of your topic with your breadcrumb trail as you wish to display it, then link as needed) or you will have to resort to some third party solution that isn't part of RoboHelp's features.
You might also take a moment and suggest to the RoboHelp development team that we need some flexibility with this aspect. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to use BREAD CRUMB / WEB DYNPRO

Hello Experts......
     My requirement is.. i have certain task numbers which will be displayed as multiple links ( i used multilple links option in BREAD CRUMB to display them ). When i click on each task number i must get some data from ztable (like Person Responsible for RS,UTD..... ) and displayed under the task number.
     Iam successfull in displaying my task numbers as :
101>102>104>.............. but iam not able to code to get data displayed for the task number (when clicked on it).
     Plz ... can any one help me out with sample code.. or some examples...on BREAD CRUMB

hi sandhya.......
          when the bread crumb is clicked, read the attribute that is bound to the bread crumb.... and get values accordingly.
---regards,
   alex b justin

Bread crumb Navigation full path

Hi..
How to show Bread Crumb full navigation path in SP 2013
Ravindranath

Hi,
According to your description, you might want to show the Breadcrumb in SharePoint 2013 as what it is in SharePoint 2010.
Here are two links about adding breadcrumb in SharePoint 2013 would be helpful:
http://academy.bindtuning.com/lets-bring-the-breadcrumb-back-to-sharepoint-2013/
http://blog.amtopm.be/2013/01/04/sp2013-adding-breadcrumbs/
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Bread-Crumb in SharePoint 2013 required

HI All,
I required to create a solution to get the Bread-Crumb in SharePoint 2013.Can any one help how can I do this using visual Studio
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .

Did you see the following posts to bring Breadcrumb back in SP 2013?
SP2013. Adding breadcrumbs
Let’s bring the breadcrumb back to SharePoint 2013!
If above works then just first implement this in your Dev environment and make sure there are no issues and also verify, if possible, any issue related to performance.
Amit

Unable to see view in drop down list at end of bread crumb

Hello,
I've a saved view in a List in SharePoint 2010
the View used to display in the drop down list at the end of the breadcrumb but is no longer displayed. It disapeared one day after editing the page layout of the view)
The view still exists and is accessible from a saved hyperlink.
the view contains multiple web parts and three separate lists in the same site, filter from a forth (or master list) all in the same site.
how can I get the view to re-appear in the drop down list at the end of the bread crumb?

Yes, meant to pop that in the original post, Had a look in the per-location element. Nothing there either! It's disappeared from the site, but as I say a legacy Hyperlink stored in favourites
still brings it out - I can edit the page when I get there etc...
Apreciate you assistance BTW :-)

How to create dynamic connection in business view manager.

Hi Sir,
Can u explain how to create dynamic connection in business view manager.
Thanks
Vishali Raghava Raju

HI Vaishali,
Can you please elaborate your requirement ?
-Regards
B

How to create users on JDI

Hi
How to create users on JDI... how to access JDI....
I want to create users, groups in JDI
Please help me....
Thanks & Regards
Ravi Shankar B

Hi
What is the difference b/w Inactive, active and Local DCs...
In inactive and active DCs i am not getting any thing... why?
and i need to know how to do the following configuration.....
Creating Users
The following shows you how to create various users. Developer and Admin are just placeholders for actual people. CMSadm, on the other hand, is the user name recommended by SAP for the CMS user used by the CMS to access the DTR, CBS, and SLD.
.1Choose Create User.
.2Create the users Developer, Admin, and CMSadm, in this order.
Assigning Users to Groups
.1 Choose Groups.
The Groups screen appears.
.2 In the Groups field, select the JDI.Developers role and choose Assign Users to ...
The Assign User(s) screen appears.
For more information, see the installation manual of SAP NetWeaver Development Infrastructure.
.3 Choose Add User ...
The Search for User screen appears.
.4 Enter the user ID Developer and choose Search.
The Search Result(s) screen appears.
.5 In the list, select the Developer user and choose Select.
On the Assign User(s) screen, you see a list of all users that have the JDI.Developers role. Developer has now also been included in the list.
.6 In the same way, assign the JDI.Administrators role to the users Admin and CMSadm.
If the SLD is installed on a separate J2EE Engine, you must also create the users Developer and CMSadm in this Engine as well.
Thanks & Reagards
Ravi Shankar B
Message was edited by: RaviShankar B

How to creat Test Data Directory

Hi Experts,
I want to create a TEST DATA DIRECTORY for the following function module CLOI_CHANGES_UPL_31. How to create this?
Actually now i have some process order numbers. Using this how to create the test data directory??
Plz guide this.
Point will be sure.
Mohana

Hi Mohana,
      Test data directory is similar to variants in reports.
      After executing the function module give some input and click the save button . It will prompt a name . Give the name and click enter. So this test data is saved in the test data directory.
   So that you need not not give the test input again and again. you can simply click the test dat directory and select your test data .
Regards,
Charumathi.B

"Bread-Crumb" Links

Once I generate my WinHelp project and open it in a browser,
the topic windows show across the top of the window what I've heard
called a "bread-crumb" navigation trail (for example, one such
trail would be
Home >
Introduction >
Overview. I would like to know how to remove these
navigation links. I've looked through all the windows and through
Help, but I'm not really sure what topic to look under.
Any help would be appreciated. It's a cosmetic thing but it
would make the final product, which will include page-specific
help, look much better.
Thanks.

Hi SGarriott and welcome to the RH forum.
Why are you opening WinHelp output in a browser. It's like
putting a Ferrari engine into a Ford Focus and expecting things to
work like clockwork?

Af: bread crumbs in JEE project

I have a JEE project with adf faces as view tier (using faces config for navigation rules). I want to show the navigation path on each page i.e. say Home > Employee > Departments on Department page, Home > Employee on Employee page and so on. I guess bread crumb does this, but can some one tell me how to achieve this in JEE project.
thnks

thnks for the replies friends,
did some work on it...
took this sample code and pasted in one of mu jsp files
<af:breadCrumbs id="breadCrumbs1">
                <af:commandNavigationItem text="Tag Guide" action="guide"
                                          id="cni1"/>
                <af:commandNavigationItem text="Oracle.com" destination="http://www.oracle.com" targetFrame="_new"
                                          id="cni2"/>
                <af:commandNavigationItem text="Disabled Item" disabled="true" action="guide.tree"
                                          id="cni3"/>
                <af:commandNavigationItem text="NavigationPane Demo"
                                          action="guide.navigationPane"
                                          id="cni4"/>
                <af:commandNavigationItem text="Current Page" action="guide.breadCrumbs"
                                          id="cni5"/>
              </af:breadCrumbs>Now, my doubt is if have this code in a common page and include it in all pages each page will have the same value in bread crumb.
My pages have have 2 way navigation i.e user can visit the same page from 2 diff pages.. so my bread crumb value needs to be updated as per that ..
did i miss something in breadcrumb can someone plz help me here ?
thnks

Question about bread crumb.

Hello,
Can somebody will tell me how to get the current area from the bom and display a bread crumb for that area? Which bom has that method? Is it isacorebom?
I need it for b2b & b2c. I am working in ISA 4.0
Thanks,
Harsha

Hi Harsha,
What i unserstood by your requirement that you want to display the current area in ISA to be displayed.
You can use the showmodulename parameter. It is provided in ISA by default.
For example: for B2B
http://host:50000/b2b/b2b/init.do?showmodulename=true
Thanks,
Prashil

Multi Bread Crumb

Hi,
I need to use the Bread Crumb that too with multi select.
How can u populate this bread crumb?
IPrivateAdmin.IBreadCrumbElement breadCrumbElement =
wdContext.createBreadCrumbElement();
breadCrumbElement.setDisplayName(resourceBean.getDisplayName());
wdContext.nodeBreadCrumb().addElement(breadCrumbElement);
I used the above code, and i got it populated on each user defined action.
Now, i have a problem with the onSelect method, i want to know which link in the
multiselect, the user clicked. How to do that?
Regards
BP

>
Bobu George Putheeckal wrote:
> Now, i have a problem with the onSelect method, i want to know which link in the
> multiselect, the user clicked. How to do that?
>
Hi Bobu,
Try using event parameter mapping. http://help.sap.com/saphelp_nw04s/helpdata/en/60/1f1f056f057d4d962375efd3c92ed0/frameset.htm
Regards,
Anagha

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

How to create a report based on a DataSet programatically

I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
      public NewReportWorker(string reportFileName)
         : base(reportFileName)
public override void Process()
         DatabaseController databaseController = ClientDoc.DatabaseController;
         Table table = new Table();
         string tabelName = "Table140";
         table.Name = tabelName;
         table.Alias = tabelName;
         table.QualifiedName = tabelName;
         table.Description = tabelName;
         var fields = new Fields();
         var dbField = new DBField();
         var fieldName = "ID";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         dbField = new DBField();
         fieldName = "IDLEGITIMATIEBEWIJS";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         // More code for more tables to add.
         table.DataFields = fields;
         //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
         //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
         //info.Attributes.Add("Databse DLL", "xxx.dll");
         //table.ConnectionInfo = info;
         // Here an error occurs.
         databaseController.AddTable(table, null);
         ReportDoc.SetDataSource( [MyFilledDataSet] );
         //object path = @"d:\logfiles\";
         //ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
   internal abstract class Worker
      private ReportDocument _ReportDoc;
      private ISCDReportClientDocument _ClientDoc;
      private string _ReportFileName;
      public Worker(string reportFileName)
         _ReportFileName = reportFileName;
         _ReportDoc = new ReportDocument();
         // Load the report from file path passed by the designer.
         _ReportDoc.Load(reportFileName);
         // Create a RAS Document through In-Proc RAS through the RPTDoc.
         _ClientDoc = _ReportDoc.ReportClientDocument;
      public string ReportFileName
         get
            return _ReportFileName;
      public ReportDocument ReportDoc
         get
            return _ReportDoc;
      public ISCDReportClientDocument ClientDoc
         get
            return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+           * the following two string values can be modified to reflect your system+
+          ************************************************************************************************/+
+          string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb";    // path to xtreme.mdb file+
+          string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+          // Dataset+
+          OleDbConnection m_connection;                         // ado.net connection+
+          OleDbDataAdapter m_adapter;                              // ado.net adapter+
+          System.Data.DataSet m_dataset;                         // ado.net dataset+
+          // CR variables+
+          ReportClientDocument m_crReportDocument;          // report client document+
+          Field m_crFieldCustomer;+
+          Field m_crFieldCountry;+
+          void CreateData()+
+          {+
+               // Create OLEDB connection+
+               m_connection = new OleDbConnection();+
+               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+               // Create Data Adapter+
+               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+               // create dataset and fill+
+               m_dataset = new System.Data.DataSet();+
+               m_adapter.Fill(m_dataset, "Customer");+
+               // create a schema file+
+               m_dataset.WriteXmlSchema(xsd_path);+
+          }+
+          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+          void AddDataSourceUsingDataSet(+
+               ReportClientDocument rcDoc,          // report client document+
+               System.Data.DataSet data)          // dataset+
+          {+
+               // add a datasource+
+               DataSetConverter.AddDataSource(rcDoc, data);+
+          }+
+          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+          // above.+
+          void AddDataSourceUsingSchemaFile(+
+               ReportClientDocument rcDoc,          // report client document+
+               string schema_file_name,          // xml schema file location+
+               string table_name,                    // table to be added+
+               System.Data.DataSet data)          // dataset+
+          {+
+               PropertyBag crLogonInfo;               // logon info+
+               PropertyBag crAttributes;               // logon attributes+
+               ConnectionInfo crConnectionInfo;     // connection info+
+               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+               // database table+
+               // create logon property+
+               crLogonInfo = new PropertyBag();+
+               crLogonInfo["XML File Path"] = schema_file_name;+
+               // create logon attributes+
+               crAttributes = new PropertyBag();+
+               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+               crAttributes["QE_ServerDescription"] = "NewDataSet";+
+               crAttributes["QE_SQLDB"] = true;+
+               crAttributes["QE_LogonProperties"] = crLogonInfo;+
+               // create connection info+
+               crConnectionInfo = new ConnectionInfo();+
+               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+               crConnectionInfo.Attributes = crAttributes;+
+               // create a table+
+               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+               crTable.ConnectionInfo = crConnectionInfo;+
+               crTable.Name = table_name;+
+               crTable.Alias = table_name;+
+               // add a table+
+               rcDoc.DatabaseController.AddTable(crTable, null);+
+               // pass dataset+
+               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+          }+
+          void CreateReport()+
+          {+
+               int iField;+
+               // create ado.net dataset+
+               CreateData();+
+               // create report client document+
+               m_crReportDocument = new ReportClientDocument();+
+               m_crReportDocument.ReportAppServer = "127.0.0.1";+
+               // new report document+
+               m_crReportDocument.New();+
+               // add a datasource using a schema file+
+               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+               // for more information, refer to comments on these methods.+
+               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+                              +
+               // get Customer Name and Country fields+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               // add Customer Name and Country fields+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+               // view report+
+               crystalReportViewer1.ReportSource = m_crReportDocument;+
+          }+
+          public Form1()+
+          {+
+               //+
+               // Required for Windows Form Designer support+
+               //+
+               InitializeComponent();+
+               // Create Report+
+               CreateReport();+
+               //+
+               // TODO: Add any constructor code after InitializeComponent call+
+               //+
+          }+//=========================================================================

How to create Bread Crumb

Similar Messages

Maybe you are looking for