How to create Bus?
I am new to logic but presume that a bus lets you create a channel specifically for an effect with which you can pass other channels through, or insert on other channels? I am not entirely sure. I was wondering if anyone could describe how to create a bus?
I'm afraid Faisal was wrong - he's on Logic 7 and Logic 8 is completely different.
You don't ned to create a bus, you just have to use them.
In the Channel Strip area, find the word Sends. There are two boxes underneath by default. Click hold on the top of the two and select Bus > Bus 1. A fader appears to the right of the box which allows you to determine how much of the signal you want to send to the bus.
Having sent the signal to a bus, click on Mixer just above the Transport Bar. You will then see that a new Aux channel has ben created. How do you know it's the right one? Check its I/O settings. You'll see that it's getting its signal from Bus 1 and sending to Output 1/2. It's on that Aux that you add your inserts.
You can then route several tracks to Bus 1, assuming you want them all to have the same sound treatment.
Why only two boxes underneath in the Sends area? As you add a second send, a third box appears so you can keep on adding more, should you need them.
Logic 8 introduced this concept of auto-creating Auxes as you need them. Quite different from Logic 7 where you had to create them when you installed (or later configured) the program. Also, you could see the Buses in Logic 7, while you don't normally see them in Logic 8, unless you really, really want to but that's another story...
Pete
Similar Messages
-
How to creating a role configuration key, nd how to assigning it to our bus
how to creating a role configuration key, nd how to assigning it to our business role?
advance thanks..Hello Suri,
To create the Role Key
In the SPRO CRM - UI Framework - Technical Role Definition - Define Role Configuration Key
Then to assign the Business Role in the
In the SPRO CRM - UI Framework - Business Roles - Define Business Role
The field for the Role Key is Config Key
Regards. -
How to create a new Oracle OSB project automaticaly with script without IDE
Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik -
How to create cost element in controlling
how to create cost element in controlling for Direct meterail.
i have to create for each materail or on rm consumption is enough
please give me replay
thanksHi Nagaraju,
First you create the required account as cost element through FS00 and select your gl account and edit cost element and give 1 in cost element category.
Afterwards in OKB9 You create the cost element whether it is required for Bus Area mandatory, profit centre mandatory and Valuation area is mandatory. Based on your selection you have to assign 1, 2 or 3. Ex. You have selected for consumption account profit centre is mandatory. You give 3. and you have to assign the cost centre against profit centre. Then automatically your consumption will post to the cost centre.
BSR -
How to create this Hieararchical Tree?
Hi All,
Please help me on this issue.
I need DRILL DOWN functionality in forms. Im trying to Study / Create Hierarchi Tree Concept in Forms 6i, but couldn't able to manage /Understand how to create this. Please any one could help me. and im giving my scenario also here, whether it can support or not.
Our routes having lot of terminals, like Our Bus travels from KENYA to SOUTH AFRICA passing TANZANIA,ZAMBIA,MALAWI,BOTSWANA countries. so i need the No of records to be dynamic i cant fix 10 records and scroll etc, Rather im trying to use Heirarchi Trees to achive this.
My Table is like this.
Table #1 Route_quotas
Route_no,terminal_name,quota_station_from,quota_station_to,no_of_seats,seat_no_start_from,seat_no_ending
Data is Like this:
1,GNT,GNT,HYD,10,1,10
1,GNT,GNT,VJA,40,11,50
1,VJA,VJA,KDD,10,11,20
1,VJA,VJA,HYD,30,21,50
I need data to be displayed / functoned like this. If One select Route_no 1 in a List_item. Down to that i should show which terminals having quotas in this route. those are.
GNT
VJA
Next ... If One selects this node like if one Expands GNT node the sub nodes should be like this having three coulmns (i.e quota_station_from,quota_station_to,no_of_seats columns)
GNT HYD 10
GNT VJA 40
Next again.. if One select the first subnode it should give ...the seat Nos
1,2,3,4,5,6,7,8,9,10 (please Omit the commas) and from there i should be able to select one seat_no and do some actions based on that. like RESERVE or ISSUE what ever i like. i need that Seat_no value.
GNT
........GNT HYD 10
................ 1 2 3 4 5 6 7 8 9 10
........GNT VJA 40
................11 12 13 14 15....50
VJA
........VJA KDD 10
................11 12 13 14 15 16 17 18 19 20
........VJA HYD 30
................21 22 23 24 ...... 50
Thanks in advance.Rama,
I would use nested PLSQL cursors to populate a record group and create the tree from there. This way you can also concatinate multiple values to show as a single name in a tree.
Frank -
How to Create the Custom print Quote Report ?
Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
ThanksHi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks -
How to create a report based on a DataSet programatically
I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
public NewReportWorker(string reportFileName)
: base(reportFileName)
public override void Process()
DatabaseController databaseController = ClientDoc.DatabaseController;
Table table = new Table();
string tabelName = "Table140";
table.Name = tabelName;
table.Alias = tabelName;
table.QualifiedName = tabelName;
table.Description = tabelName;
var fields = new Fields();
var dbField = new DBField();
var fieldName = "ID";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
dbField = new DBField();
fieldName = "IDLEGITIMATIEBEWIJS";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
// More code for more tables to add.
table.DataFields = fields;
//CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
// new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//info.Attributes.Add("Databse DLL", "xxx.dll");
//table.ConnectionInfo = info;
// Here an error occurs.
databaseController.AddTable(table, null);
ReportDoc.SetDataSource( [MyFilledDataSet] );
//object path = @"d:\logfiles\";
//ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
internal abstract class Worker
private ReportDocument _ReportDoc;
private ISCDReportClientDocument _ClientDoc;
private string _ReportFileName;
public Worker(string reportFileName)
_ReportFileName = reportFileName;
_ReportDoc = new ReportDocument();
// Load the report from file path passed by the designer.
_ReportDoc.Load(reportFileName);
// Create a RAS Document through In-Proc RAS through the RPTDoc.
_ClientDoc = _ReportDoc.ReportClientDocument;
public string ReportFileName
get
return _ReportFileName;
public ReportDocument ReportDoc
get
return _ReportDoc;
public ISCDReportClientDocument ClientDoc
get
return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+ * the following two string values can be modified to reflect your system+
+ ************************************************************************************************/+
+ string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb"; // path to xtreme.mdb file+
+ string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+ // Dataset+
+ OleDbConnection m_connection; // ado.net connection+
+ OleDbDataAdapter m_adapter; // ado.net adapter+
+ System.Data.DataSet m_dataset; // ado.net dataset+
+ // CR variables+
+ ReportClientDocument m_crReportDocument; // report client document+
+ Field m_crFieldCustomer;+
+ Field m_crFieldCountry;+
+ void CreateData()+
+ {+
+ // Create OLEDB connection+
+ m_connection = new OleDbConnection();+
+ m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+ // Create Data Adapter+
+ m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+ // create dataset and fill+
+ m_dataset = new System.Data.DataSet();+
+ m_adapter.Fill(m_dataset, "Customer");+
+ // create a schema file+
+ m_dataset.WriteXmlSchema(xsd_path);+
+ }+
+ // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+ // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+ void AddDataSourceUsingDataSet(+
+ ReportClientDocument rcDoc, // report client document+
+ System.Data.DataSet data) // dataset+
+ {+
+ // add a datasource+
+ DataSetConverter.AddDataSource(rcDoc, data);+
+ }+
+ // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+ // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+ // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+ // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+ // above.+
+ void AddDataSourceUsingSchemaFile(+
+ ReportClientDocument rcDoc, // report client document+
+ string schema_file_name, // xml schema file location+
+ string table_name, // table to be added+
+ System.Data.DataSet data) // dataset+
+ {+
+ PropertyBag crLogonInfo; // logon info+
+ PropertyBag crAttributes; // logon attributes+
+ ConnectionInfo crConnectionInfo; // connection info+
+ CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+ // database table+
+ // create logon property+
+ crLogonInfo = new PropertyBag();+
+ crLogonInfo["XML File Path"] = schema_file_name;+
+ // create logon attributes+
+ crAttributes = new PropertyBag();+
+ crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+ crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+ crAttributes["QE_ServerDescription"] = "NewDataSet";+
+ crAttributes["QE_SQLDB"] = true;+
+ crAttributes["QE_LogonProperties"] = crLogonInfo;+
+ // create connection info+
+ crConnectionInfo = new ConnectionInfo();+
+ crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+ crConnectionInfo.Attributes = crAttributes;+
+ // create a table+
+ crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+ crTable.ConnectionInfo = crConnectionInfo;+
+ crTable.Name = table_name;+
+ crTable.Alias = table_name;+
+ // add a table+
+ rcDoc.DatabaseController.AddTable(crTable, null);+
+ // pass dataset+
+ rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+ }+
+ void CreateReport()+
+ {+
+ int iField;+
+ // create ado.net dataset+
+ CreateData();+
+ // create report client document+
+ m_crReportDocument = new ReportClientDocument();+
+ m_crReportDocument.ReportAppServer = "127.0.0.1";+
+ // new report document+
+ m_crReportDocument.New();+
+ // add a datasource using a schema file+
+ // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+ // for more information, refer to comments on these methods.+
+ AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+ +
+ // get Customer Name and Country fields+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ // add Customer Name and Country fields+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+ // view report+
+ crystalReportViewer1.ReportSource = m_crReportDocument;+
+ }+
+ public Form1()+
+ {+
+ //+
+ // Required for Windows Form Designer support+
+ //+
+ InitializeComponent();+
+ // Create Report+
+ CreateReport();+
+ //+
+ // TODO: Add any constructor code after InitializeComponent call+
+ //+
+ }+//========================================================================= -
How to create a group calendar?
Hello,
i am sorry but this is one more question on wiki-group-calendars.
*In short:*
I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
LONG:
I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
+"The web calendar allows you to easily schedule events for yourself or your group. ...+
+There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
+The web calendar uses iCal Server to store events and invitations. ..."+
But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
Thanks, Philipp.
10.6.4 OSX Server
10.6.x Clientsfarmer tan wrote:
you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
migrated from 10.5.7 to 10.6
Message was edited by: farmer tan
Could you be more specific farmer tan, please?
You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
Thanks in advance for any help you can provide. -
How to create i view in visual composer give details screenshots
how to create i view in visual composer give details screenshots
Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939 -
How to create a variant to a maintenance view (trans: SM31)
Hi gurus.
I have created a maintenance view (called z_jest). By running it from SM31 there is a variant option. However, I am not able to create the variant which I want to filter a selection upon in this transaction.
I have even looked into transaction SE54 and created a variant for the maintenance table view there( called z_jestv). Then going back to transaction SM31 and view z_jest, i push 'Variant' radiobutton and type as variant: 'z_jestv', I only get the message: "Variant z_jestv for object z_jest does not exist".
Can anybody please advice on how to create and/or connect the variant to the maintenance view?
Regards LL.Hi Mahalakshmi
Thanks for reply.
When I look into the procedure, there is a prerequisite: "The basis dialog for which the maintenance variant is created already exists."
I am a little bit unsertain if I miss this 'Basic dialog'. Can you please advice on how to check / create this 'basic dialog' before I go on to create the variant. (I need this 'basic dialog' as input in the procedure you sent.)
(Note: I have already created a 'maintenance dialog' for the view, but I have a feeling, that is something different...) -
How to create transaction for a maintenance view, Thank you.
How to create transaction for a maintenance view,
Thank you.
deniz...Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks -
How to create a query view in sap bw?
can any one please tell me how to create a query view in sap bw 3.5?
Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha -
How to create a tree view in adobe configurator
Hi
How to create a tree view in adobe configurator
ThanksPlease, can you explain what you mean exactly?
-
How to create a error message for Deleted batch while creating a PO
Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhiin badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check. -
How to create a job card and how to add waranty card in sales order
I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
VenkatHi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna
Maybe you are looking for
-
Goodmorning, I've installed BO XI R3 SP4 on a 2k3-server with IIS 6.0. I wanted to configurate the SSO. After changing the web.config file and restart of the IIS , I get the following error : HTTP Error 405 - The HTTP verb used to access this page is
-
Business connector Error Clarification
Hi This is regarding the error: <i>"Login attempt as user dtinet\invista-b2b on host whex004 failed"</i> The inbound messages to the BC system had stopped abruptly. The messages were in our server mailbox; but BC is not fetching those. I checked the:
-
I have moved from the UK to the USA and have a new phone, I try to change my country location on the store and get an error message saying I have to cancel my itunes match and also that I have a pass incomplete, any ideas how to fix and change the st
-
Hi Nokia,I own a Nokia Lumia 520 and now in summer I have problem with my device.When I'm charging It and play games at the same time or sometimes just play It get's really hot the upper spot from the camera. I read that for safety reasons It will cl
-
How can delete my password backup on itunse
i want to backup my ipad 2 ios 6.1 on my lap top on itunse ...... but iwant to delete password backup on itunse >>>!!!!!!