How to create Buttons for Excel,Print & help!

Hi Experts
Anyone has an experience how to create a Buttopn Group for the following options.
1.Excel
2.Printchart
3.Printtable
4.Printreport
5.Help
Pls revert to me <removed by moderator>.
Thanks
BI Learner
Edited by: Siegfried Szameitat on Dec 1, 2008 10:46 AM

Hi,
Your PDF output and the output of the Template on Web should be similar, ideally. But, if the width of the 2 reports are bigger and that cannot fix in one page, then the PDF output will not be as you require it to be.
You have to decrease the dimensions of the Analysis item in the Template and see how the output size varies in the Web.
Also, when you have defined the command for converting to PDF, select the checkbox which allows you to see the "Page Setup" while you are converting it to PDF in the Web, ie in the output of the template. Here, set the margins to the minimum (Left, right, top and bottom). This also ensures that the Analysis item gets the maximum area in the output.
Just try this piece of code too,
<bi:CAPTION value="Print PDF" />
<bi:TOOLTIP value="Print to PDF Document" />
<bi:ACTION type="CHOICE" value="INSTRUCTION" >
<bi:INSTRUCTION >
<bi:EXPORT >
<bi:REPEAT_KEYCOL value="" />
<bi:PAPER_ORIENTATION value="LANDSCAPE" />
<bi:MARGIN_RIGHT value="10" />
<bi:MARGIN_LEFT value="10" />
<bi:MARGIN_TOP value="10" />
<bi:MARGIN_BOTTOM value="10" />
Here the margins are set to 10. You can even try decreasing this depending on your requirement.

Similar Messages

How to create buttons for each slide in slideshow

I currently have a slideshow working with prev and next buttons,
but would like to add numbered buttons for each slide at bottom of images,
with a static number for the active slide that has a colored circle around that number.
I can create static number with colored circle in Photoshop and add that to a layer,
but it's labor intensive to do that for all numbers.
Is there a better way to create the highlighted numbers for active slide?
For numbered buttons that link to non-active slides, I can create numbers in Photoshop and import images into Flash,
then convert to symbols and assign actions for them,
But that too is labor intensive to do for all the numbers.
Is there a better way to create numbered buttons for non-active slides?
I'd also like to have a hover function on the numbered buttons,
that changes from plain image of number to number with colored circle like I want to use for active slide.
How do I assign a hover function to button symbol, that will load another image or symbol?

Try to think in terms of having reusable symbols. Think it thru before you try it.
Use a movieclip symbol instead of a button. Have a dynamic textfield in that movieclip for the number, and set the textfield to not be selectable. Have one frame of this movieclip where it displays as the highlighted (selected) one and have the movieclip go there where you are on that slide.
Use the textfield for the number--assign it dynamically so that you don't have to import an image for it. Use as many of these movieclips as you need to for all your buttons.
Have functions that reset all the buttons at once so that when you move to a new slide, the previously selected one goes back to mormal... follow that with setting the newly selected one to be in its "selected" frame.

How to create a help button for downloading a help file in OA Framework

Hi all
I want to create a help button for downloading a help document.Plz suggest me how to do it.
Thanks
Bhupendra

Create a button of type "button",set the destination url property to the place u have kept the file.But ur file should be anywhere in Common_top.If this file is stored as blob u can use messagedownload bean.
--Mukul

How to create prompt for inline filter?

HI All. Can anyone plz help me, how to create prompt for inline filter?
Let me give an examle...
Suppose I've taken two columns as # of New Invoices and # of Cancelled Invoices
Now, If I set a date prompt / month prompt, then the "# of cancelled invoices" column will fetch the number of cancelled invoice for that month only, which I have chosen in the prompt. But I want the "# of cancelled invoices" column to fetch data for the month chosen by me in another prompt.
So, can anyone help me with the sql statement, which will fetch the prompt data (i.e., month / date chosen by the user) automatically and will furnish the result accordingly.
Thanks.

To create a column prompt:
To create a dashboard prompt, use the following sub-procedure.
Navigate to the Oracle BI Enterprise Edition Home page, locate the global header, hover the mouse pointer over the New menu to access the menu, and select Dashboard Prompt. From the Select Subject Area menu, select the subject area for which you want to create a prompt. The "Definition pane" is displayed.
Click the New toolbar button in the Definition Pane to access the prompt type selection list. From the list, select Column Prompt. The "Select Column dialog" is displayed.
Select a column and click OK. The "New Prompt dialog" displays. If your repository is configured for double columns, then ensure that you select the correct display column. For information on double columns, see "Understanding the Double Column Feature".
The number of columns that you include in a prompt can affect performance. In general, you should limit the number of columns to as few as possible.
If you are creating a dashboard prompt and want to add or remove related subject areas, then click the Select subject area button in the "Select Column dialog" to display the "Add/Remove Subject Areas dialog".
To create an inline prompt, use the following sub-procedure.
Create a new analysis or access an existing analysis for which you want to create a prompt. Click the Prompts tab. The "Definition pane" is displayed.
Click the New toolbar button in the Definition Pane to access the prompt type selection list. From the list, select Column Prompt. The analysis' selected columns are displayed in the cascading menu that is adjacent to the Column Prompt selection item.
http://webmastersomesh.com

How to Create Buttons With some operation

Hello friends How can create button so that when i click that button it should open another new window so that i can select some options in that new window and do some calculations.
Kindly help me .
byee

Hi JN,
I have created a Frame which has some checkboxes , a button and text field. when i check some checkboxes and press the Button (ie in my program Metrics level Button ) it should display the result as number of checkboxes that are checked divided by total number of chechboxes. ie if i check some 6 check boxes and press the Metrics level button it should display 6 divided by 12 ie 0.5 in the Result Textfield.
I am sending the code i have written.
Thanks in advance.
public class Frame extends java.awt.Frame {
/** Creates new form Frame */
public Frame() {
initComponents();
setSize(800, 800);
private void initComponents() {
label1 = new java.awt.Label();
checkbox1 = new java.awt.Checkbox();
checkbox2 = new java.awt.Checkbox();
checkbox3 = new java.awt.Checkbox();
checkbox4 = new java.awt.Checkbox();
checkbox5 = new java.awt.Checkbox();
checkbox6 = new java.awt.Checkbox();
checkbox7 = new java.awt.Checkbox();
checkbox8 = new java.awt.Checkbox();
checkbox9 = new java.awt.Checkbox();
checkbox10 = new java.awt.Checkbox();
checkbox11 = new java.awt.Checkbox();
checkbox12 = new java.awt.Checkbox();
button1 = new java.awt.Button();
textField1 = new java.awt.TextField();
setLayout(null);
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
label1.setText("Select the Metrics below");
add(label1);
label1.setBounds(320, 20, 136, 20);
checkbox1.setLabel("Architecture Metrics");
add(checkbox1);
checkbox1.setBounds(240, 80, 84, 20);
checkbox2.setLabel("Runtime Metrics");
add(checkbox2);
checkbox2.setBounds(240, 200, 115, 20);
checkbox3.setLabel("Documentation Metrics");
add(checkbox3);
checkbox3.setBounds(240, 320, 152, 20);
checkbox4.setLabel("Size");
add(checkbox4);
checkbox4.setBounds(280, 110, 49, 20);
checkbox5.setLabel("Structure");
add(checkbox5);
checkbox5.setBounds(280, 130, 75, 20);
checkbox6.setLabel("Complexity");
add(checkbox6);
checkbox6.setBounds(280, 150, 86, 20);
checkbox7.setLabel("Size");
add(checkbox7);
checkbox7.setBounds(290, 230, 49, 20);
checkbox8.setLabel("Structure");
add(checkbox8);
checkbox8.setBounds(290, 250, 75, 20);
checkbox9.setLabel("Complexity");
add(checkbox9);
checkbox9.setBounds(290, 270, 86, 20);
checkbox10.setLabel("Size");
add(checkbox10);
checkbox10.setBounds(300, 350, 49, 20);
checkbox11.setLabel("Structure");
add(checkbox11);
checkbox11.setBounds(300, 370, 75, 20);
checkbox12.setLabel("Complexity");
add(checkbox12);
checkbox12.setBounds(300, 390, 86, 20);
button1.setLabel("Metrics level");
add(button1);
button1.setBounds(290, 470, 83, 24);
textField1.setText("Result");
textField1.setName("Result");
add(textField1);
textField1.setBounds(400, 470, 60, 20);
pack();
public void actionPerformed(ActionEvent e) {
****** I think code should be added here for the button pressed event*******
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
* @param args the command line arguments
public static void main(String args[]) {
new Frame().show();
// Variables declaration - do not modify
private java.awt.Button button1;
private java.awt.Checkbox checkbox1;
private java.awt.Checkbox checkbox10;
private java.awt.Checkbox checkbox11;
private java.awt.Checkbox checkbox12;
private java.awt.Checkbox checkbox2;
private java.awt.Checkbox checkbox3;
private java.awt.Checkbox checkbox4;
private java.awt.Checkbox checkbox5;
private java.awt.Checkbox checkbox6;
private java.awt.Checkbox checkbox7;
private java.awt.Checkbox checkbox8;
private java.awt.Checkbox checkbox9;
private java.awt.Label label1;
private java.awt.TextField textField1;
// End of variables declaration
this is the output when i execute the program

How to create a new excel file using Excel Destination when Destination file not exists.

how to create a new excel file using Excel Destination when Destination file not exists.

Just need to set an expression for excel connectionstring and set delay validation to true and it will create it on the fly.
The expression should return the full path with dynamic filename in each case.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create program for bapi?

hi all,
how to create program for bapi?
reply me soon now.....
can anybody help me.....
thanks,
S.Suresh.
Title was edited by:
Alvaro Tejada Galindo

Hi ...Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Overall Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
BAPI Creation Info :
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Reference :
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/00/32a43697bc11d1acf9080009b0fb56/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/EN/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

How to create infopackage for Cube to Cune to transaction

HI Experts
I have performed following steps for cube to cube load.
1. Created source cube and loaded the data from R3
2. Created Destination cube
3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource. its not showing up any name with 8ZFIGL_C01.
Kindly let me know how to create infopackage for this to laod the data from cube to cube.
Additional information:
I have set the optopn Display Generated Object in Settings.
Thanks in advance for your help.
Regards
NLN

Hi,
Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
See solution from SAT:
Problems with Infosource Data Marts
Best regards,
Frank

How to create Buttons for Excel,Print & help!

Similar Messages

Maybe you are looking for