How to Create Certificate at the ECC 6.0 ( Trusting System ) in STRUSTSSO2

Hi Experts,
We are in the process of setting up Log On Ticket Based SSO Back End Connectivity from Portal to ECC 6.0 .
But, in STRUSSO2 when I try to Export the Certificate it has text file cert. And this cert is not
being accepted by Portal side i.e. at keystore Page while I try to import this Cert there , it say that
invalid Cert . Beside this, .der and .pse ..which one we need to use ?
So, I need to create first the Cert at the ECC side so that I can export and then import at the Portal.
How do I create Cert in STRUSSO2 at the ECC Side  ?
Also, do I need to create the RFC JCo destination at the Portal side ? Or Just the User Mapping at the Portal side is enough .
Any / ALL Help is most welcome and would sure, be rewarded with appropriate point in addition to the
sincere appreciation of  your time and help in the matter.
Thanks,
Regards,
- Ishan

Hello. You need to export sertificate in "binary" mode, from MENU --> Certificate --> export. Read for example http://help.sap.com/saphelp_nw70/helpdata/EN/fa/741a403233dd5fe10000000a155106/frameset.htm
I'ts about BW but the same sense. 
P.S. you say "SSO Back End Connectivity from Portal to ECC 6.0" ,you need to create iViews in portal and see the ECC pages? For this you need to export Certificate from "Portal" and import in ECC ,and add in ACL in required client. Export from portal : System Configuration --> system administration  --> keystore administration --> export verify.der
Read :
http://help.sap.com/saphelp_nw70/helpdata/EN/0a/a354426fdeb430e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/78/f1a8490e7011d6999500508b6b8a93/frameset.htm
Regards.
Edited by: Sergo Beradze on Jul 13, 2008 2:41 PM

Similar Messages

  • How to create a package in ECC 6.0.

    Hi,
    Can you tell me how to create a package in ECC 6.0 system?
    Thanks in advance,
    Regards,
    Arnab.

    Hi,
    Thank you for your replies.
    Can you tell me the difference and uses of the two types of package I can create from SE21.
    i.e. : Package and package interface. any sap link would also be helpful. I need to know where i can use what and what would be helpful for my case.
    Regards,
    Arnab.

  • How to create watch points in ECC 6.0

    Hi Experts,
    How to create watch points in ECC 6.0
    Thanks.

    Dear Kalyan,
    The moment the debugger starts, there will be an icon for "Watchpoint" exactly after F5, F6, F7, F8 and a big STOP red button on the application tool bar. Once you click on that Watchpoint button, it will take you to the screen where you need to define the exact field and its relative operator along with the condition to be checked.
    Hope this is clear. No navigation needed for this.
    -Syed.

  • How to create User Exits in ECC 6

    Hi Experts,
    good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
    thanks you for your usual support.

    Hello,
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Any Basics u wana know abt Enhancements.,.,go through the link.,
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    Thanks,
    Swati

  • How to create F4 for the standard transaction

    Hi all ,
    How to create F4 for the standard transaction for a particular field .
    Bye

    Santosh,
        You can create F4 values for a field in a standard Transaction .
    1. First search for a standard search help meeting your requirement .
    2. If you don't find one, create your own custom (z) serach help .
    ( 1 is preferable )
    After that, include that serch help to the standard field in the transaction .
    For this u need to go to the screen
    ( F1->F9-> screen-> Field )
    Click on the property of the field and include the search help .
    You ll require the access key from the basisi guys as u r changing standard .
    Hope it helps,
    ~ laxmi
    Reward for helpful answers

  • How to creat deadlock for the purchase order in SAP Workflow

    How to creat deadlock for the purchase order in SAP Workflow

    Hi Ben,
    Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date?  If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
      DATA: vf_doc_date(10),
                 internal_date TYPE d.
         vf_doc_date = sy-datum.              "Document date.
         internal_date = vf_doc_date.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
        EXPORTING
          date_internal            = internal_date
        IMPORTING
          date_external            = vf_doc_date
        EXCEPTIONS
          date_internal_is_invalid = 1
          OTHERS                   = 2.
    Regards,
    Vivek

  • How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    You have to select one or the other.
    Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
    Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
    Peter

  • How to create Variables for the Key Figures

    Hi All,
    How to create Variables for the Key Figures
    Thanks
    Bhaskar

    Hi,
    It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
    With rgds,
    Anil Kumar Sharma .P

  • How to create Reports for the infopath form data

    Hi All,
    I have a requirement to generate reports in SharePoint based on InfoPath form data which is submitted into form library. Do I need to store each InfoPath form data into SQL Database/MS Access Database. if yes, can any one  help me on this how
    to save InfoPath form data into DB while submitting into "Form Library". based on the data stored in DB how to create  and view the report in SharePoint?.
    Thanks in Advance,
    Satish
    Thanks & Regards Satish Dugasani

    Thank you for asking the questions for clarification, my requirement is like below
    1. Need to insert all infopath form fields data into Access Database when i am submitting to the Form library
    2. Create Access Reports like based on time period, based on submitter name, based on state, city, and combination of these etc.
    3. Sync Access Database every time i am updating the form
    4. View Access Reports in share point site
    PS: I worked on this like below approch
    1. Written Web Service to Sync Access Database for the Infopath form
    2. Create Access Reports
    3. Publish using "Publish to Access Services" by providing site URL it will create a subsite there i can able to see reports, tables, macros etc. but that is not an user friendly like i am not able to apply my branding because it is pointing to /_Layouts/accsrv/Modifyapplication.aspx.
    could any one suggest me on this.
    Thanks & Regards Satish Dugasani

  • How to creating TreeModel of the underlaying drives

    can anybody plz tell me how to creating TreeModel of the underlaying drives. so that we get the entire tree structure of the drives like window explorer.

    This thread will get you started.
    http://forum.java.sun.com/thread.jsp?forum=57&thread=457526

  • How to create links to the same page, how to create links to the same page

    How to create link to the same page with iweb?
    Thanks

    You're referring to anchors.  There are a couple of ways. These topics discuss them:
    iWeb FAQ - Anchors
    How do i hyperlink to certain portion...: Apple Support Communities
    OT

  • How to create and manage the log file

    Hi,
    I want to trace and debug the program process.
    I write the code for creating log file and debugging the process.
    But i am not able get the result.
    please help me how to create and manage the log file.
    Here i post sample program
    package Src;
    import java.io.*;
    import org.apache.log4j.*;
    import java.util.logging.FileHandler;
    public class Mylog
         private static final Logger log = Logger.getLogger("Mylog.class");
         public static void main(String[] args) throws Exception {
         try {
           // Create an appending file handler
            boolean append = true;
            FileHandler handler = new FileHandler("debug.log", append);
            // Add to the desired logger
            Logger logger = Logger.getLogger("com.mycompany");
            System.out.println("after creating log file");     
              catch (IOException e)
                   System.out.println("Sys Err");
            }Please give the your valuable suggesstion... !
    Thanks
    MerlinRoshina

    Just i need to write a single line in log file.

  • How to create and see the user interface of helloworld sample??

    hello friends,
    i have deployed the hello world sample
    now i want to know how to create and see the user interface of hello world sample.
    thanks and regards..

    If you go to bpel console host:port/BPELConsole (in a dev install, localhost:9700), click on your process, we will generate, based on the describing wsdl a UI for you ..
    hth clemens

  • E-rec   How to create or generate the index category????? SOS!!!!!

    Hi guys,
    How to create or generate the index category?.
    From the posts of this forum I have read more things but anything works:
    reports:
    -RSRETT02
    -RCF_INITIALIZE_KPRO
    -RSTIRIDX_INDXCAT_RETRIEVE
    Can anyone show me the way?
    Thanks in advance.

    Hello,
    If you haveat least Version 7.10.18 then KPro configurations are no longer required. Did you activate Business Function HCM_ERC_SES_1 as this is required for SES? The scenario to choose will depened on whether you are making a new implementation, upgrading without use of SES before or upgrading after using SES with earlier versions. Scenario 1 is for when you have activated HCM_ERC_CI_3 after using earlier versions with HCM_ERC_SES_1 already activated. Scenario 2 is for those who have upgrade and activated HCM_ERC_CI_3 but where using search without SES in their earlier version. Last scenario is when you are making a new e-Recruiting implementation (not upgrading). Also check notes 1426757 and 817145.
    When you try to search are you getting an error? Can you check in SLG1 transaction after trying to search and post the error messages. Also can you execute report RCF_CHECK_SEARCH_SETTINGS as it will point you to the missing configurations points if any based on your version.
    Regards,

  • How to Create IView with the HTML Content

    Hi Friends,
    Give me steps how to create IView with the static html file.
    Regards,
    Lakshmi Prasad.

    Hello thr...
    follow the below link for the required steps.
    [KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
    You need to upload the document onto KM. Then you will be able to create the KM Document iView.
    Cheers!!!
    Biroj Patro.

Maybe you are looking for