How to create channel mixer by script

How I can create channel mixer by JavaScript?

If you create a channel Mixer script you will most likely be using Action Manager Coder you modify from Adobe Scriptlitener Plug-in. There is a Photoshop scripting forum and scripting documentation you can download. Adobe DOM does not cover all Photoshop function. Adobe Photoshop Scripting | Adobe Developer Connection and Photoshop Scripting

Similar Messages

How to create a barcode in scripts and smartforms

hi
how to create a barcode in scripts and smartforms

Hi,
For Script:
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
For SmartForm:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Regards,
Bhaskar

How to create ArrayColletion in mx:Script from mx:Model id="results" source="/data/data.xml" /

How to create ArrayColletion in mx:Script from <mx:Model
id="results" source="/data/data.xml" />
Please see my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Model id="results" source="/data/data.xml" />
<mx:Script>
import mx.collections.ArrayCollection;
import mx.utils.ArrayUtil;
import mx.controls.Alert;
</mx:Script>
<mx:ArrayCollection id ="dt1"
source="{ArrayUtil.toArray(results.result)}"/>
<mx:Script><![CDATA[
[Bindable]
public var expenses:ArrayCollection = dt1;
[Bindable]
public var expenses2:ArrayCollection = dt1;
[Bindable]
public var dp:ArrayCollection=expenses;
public function changeDataProvider():void{
Alert.show(expenses.toString());
if (dp==expenses){
dp=expenses2;
}else{
dp=expenses;
]]></mx:Script>
<mx:Panel x="10" y="10" width="100%" height="378"
layout="absolute">
<mx:ColumnChart dataProvider="{dt1}" x="10" y="10"
id="myChart" height="318" width="100%">
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries displayName="apple" yField="apple"/>
<mx:ColumnSeries displayName="orange"
yField="orange"/>
<mx:ColumnSeries displayName="banana"
yField="banana"/>
</mx:series>
</mx:ColumnChart>
<mx:Legend dataProvider="{myChart}" x="481" y="10"/>
</mx:Panel>
<mx:Button x="284" y="416" label="Change Data" id="bt"
click="changeDataProvider()" />
</mx:Application>

Tracy,
Thanks. That worked. However I have another related question:
I convert the xml feed to a XMLListCollection by doing:
<mx:XMLListCollection id="mission"
source="{xmlFeed.lastResult.day}"/>
and
<mx:XMLListCollection id="mission1"
source="{xmlFeed.lastResult.day.tBlock}"/>
On the chart I have
<mx:ColumnChart id="missionReadiness" height="150%"
width="100%"
paddingLeft="2" paddingRight="2"
showDataTips="true" dataProvider="{mission1}">
<mx:series>
<mx:ColumnSeries xField="" yField="@today"
displayName="Today"/>
<mx:ColumnSeries xField="" yField="@tomorrow"
displayName="Tomorrow"/>
<mx:ColumnSeries xField="" yField="@afterT"
displayName="After Tomorrow"/>
</mx:series>
</mx:ColumnChart>
the yField works, but for the xField I want to have the @date
but refers to the parent node, so I am clueless on how to refer to
it.
Also, I would like to display on the chart only the values to
a specific date (like @date="05/17/2007").
Any suggestions on how to do that?
Gilbert

How to create .log for sqlplus script

Hi All,
I created a sqlplus script and run it through a window form. My user want to me create a .log file for this script so they can know the job is completed or not. Does any one know how to do it?
Thanks
OF

I created a "Login.sql" script that I use for all my sql*plus sessions.
It creates a spool file in my common directory and everything i do is logged unless i set spool off.
Take a look and it gives you an example of using spool files and how to set a directory and unique filename for each spoolfile.
The contents of this file:
-- any uppercase commands are my specific changes.
-- this file must go in the oracle bin path or where sqlplus exe is located
SET HEADING OFF
PROMPT Who What Why Where When, This is SQL*Plus!
Select 'You are connected to ' || GLOBAL_NAME || ' as ' || USER FROM GLOBAL_NAME;
set appinfo ON
set appinfo "SQL*Plus"
set arraysize 15
set autocommit OFF
set autoprint OFF
set autorecovery OFF
set autotrace off
set blockterminator "."
set cmdsep OFF
set colsep " "
set compatibility NATIVE
set concat "."
set copycommit 0
set copytypecheck ON
set define "&"
set describe DEPTH 1 LINENUM OFF INDENT ON
set markup HTML OFF SPOOL OFF ENTMAP ON PRE OFF
set echo OFF
set editfile "afiedt.buf"
set embedded OFF
set endbuftoken ""
set escape OFF
set feedback 6
set flagger OFF
set flush ON
SET HEADING ON
set headsep "|"
SET LINESIZE 250
set logsource ""
set long 80
set longchunksize 80
set newpage 1
set null ""
set numformat ""
set numwidth 10
SET PAGESIZE 24
set pause OFF
set recsep WRAP
set recsepchar " "
SET SERVEROUTPUT ON size 1000000 format WORD_WRAPPED
set shiftinout invisible
set showmode OFF
set sqlblanklines OFF
set sqlcase MIXED
set sqlcontinue "> "
set sqlnumber ON
set sqlprefix "#"
set sqlprompt "SQL> "
set sqlterminator ";"
set suffix "sql"
set tab ON
set termout ON
SET TIME ON
SET TIMING ON
SET TRIMOUT ON
set trimspool OFF
set underline "-"
set verify ON
set wrap ON
COL SPOOLFILE NEW_VALUE SPOOL;
COL SYSTIMESTAMP FORMAT a38
SELECT 'C:\oracle\spoolfiles\'||NAME||'_'||TO_CHAR(SYSDATE,'DD_MON_YYYY_HH24MISS')||'.lst' spoolfile FROM V$DATABASE;
spool &spool
PROMPT -----------------------------------------------
SELECT SYSTIMESTAMP FROM DUAL;
PROMPT -----------------------------------------------

How to create database using shell script

hai
how to create database using shell script

The documentation details the steps to create a database manually. Another option is to use DBCA to create the scripts. DBCA will give you a complete set of scripts that will create a database.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref220

How to create a table in script

hi gurus
can any one suggest me
how to create a table format in script output
i want the output be in table format
thank you
regards
kals.

Hi Kalyan,
There is option for creation of table in Scripts .
We can make the output to b displayed in table format by using BOX command .
see this
Setting default parameters for a box:
You can use the POSITION and SIZE commands to set default parmeters for a box.
Instead of:
/: BOX XPOS '11.21' MM YPOS '5.31' MM HEIGHT '10' MM WIDTH '20' MM INTENSITY 10 FRAME 0 TW
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '5' MM YORIGIN '10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
NOTE: After using the position command you can move the current position
realtively to the last used position
/: POSITION XORIGIN '10' MM YORIGIN '20' MM
Now the position will be X = 15 and Y = 30
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100
thnx
Sravani
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 5:59 PM

How to create table control in script

hi expects,
how can i create table control in script?

Hi,
It is not possible to create Table Control in Sap-Scripts n u can create it by using se51 that is screen painter only...
if useful reward with points,
regards,
Madhuri.

How to become Channel Mixer

Hi everybody
I Have Photoshop Elements 5 and I would like to upgrade it to a later version. Now I need to know if PSE 8 would have Channelmixer, which I need for my work. If not, can I upgrade to a Adobe Version with Channel Mixer ? And how can I do this ?
Thank you for some advice !
Hanny

Can you point me to where the $299 upgrade to CS5 from PSE8 offer is located? When I
go to the Adobe store and specify an upgrade from PSE8 to CS5, the price is $599. $199 for CSx to CS5,
but that does not help me. Did this promotion end, or am I missing something? Do you happen to know how long the offer will be on the table?

How to add Channel mixer?

Dear Photoshop Elements Users
I am new to this and for my photography assignment it says I need to edit image using Channel mixer which elements 13 doesn't have.
I am bewildered....
Im trying to work out how and what I need to download (found info that there is free download CS5?) but can't work out where the actual button is to say download now!
can anyone help me?
thanks
Frustrated Fran

Your best bet is to purchase Elements + for $12. It is version specific and has Channel mixer.and a lot more.
About Elements+

How to create a Mix trk from my Audio Timeline?

I haven't created a Mix trk in a while, and I forgot how to collapse all the Audio Trks into one. I remember there is a function in the Menus, but that's about it.
Thank you in advance.

Thank you Jim for your answer. I'm flattered that you think I'm hip to this technical shorthand. Unfortunately I'm not in that League. My goal is to give a Post house which did the color corrections a Mix trk to line up with the sequence, for making a Quick Time towards a DVD.
I'm curious about the "nesting" reference, because part of my question was : will I have to clean up the Timeline of all the disabled clips I keep - in case I want to go back to an old version -. That is time consuming and I'd have to allow for it.
Many thanks for sharing your knowledge generously.

How DAQmx Create Channel for Accelerometer will convert the voltaage signal into g

HI all,
I want to know about DAQmx Create Channel for Accelerometer hoe it will do the convertion any one reply me
Regards,
Santhosh M

Most of the accelerometers that i have used till now are ICP devices.
They need about 5mA current to power them selves up. Other wise they give inaccurate output.
I guess you are measuring a raw time domain vibration signal.So you just need to
I have attached my own code of how i acquires a vibration signal usin PXI-4462 and 4461 modules. Keep it secret till i do my thesis .
You have to specify channel name ,device name, and remember to create the channel using the AI-accelerometer -accelerometer VI ,if you use any other form of this polymorphic vi then ICP source options will not be there and your sensors will not have the current to work properly.
Attachments:
New Microsoft Office Word Document.pdf ‏126 KB

How to Create a LiveTrace Options Script

Hello everyone!
I am using Illustrator CS3 on WinXP Pro.
Let me begin by saying that this is my first attempt at scripting anything and any help would be truly appreciated. I have written a script:
var myDocument = app.activeDocument;
var mySelection = myDocument.rasterItems[0];
mySelection.selected = true;
app.selection[0].trace();
app.selection[0].cornerAngle = 180;
app.selection[0].fills = true;
app.selection[0].ignoreWhite = true;
app.selection[0].minArea = 0;
app.selection[0].pathFitting = 0;
app.selection[0].threshold = 256;
app.selection[0].tracingModeType = 'TRACINGMODEBLACKANDWHITE';
app.redraw();
This script is tracing the raster image (barcode). However, it doesn't appear that it is using any of the tracing options.
Does anyone know how to properly script this in order to utilize the tracing options and then expand at the end?
Any help would be truly appreciated.
Many Thanks!

I didn't hack this out, so I may be off - but from what i gathered from the JS guide :
the trace() method returns an object.
-- From the Guide --
A tracing object, which associates source raster art item with a vector-art plugin group created by tracing.
Scripts can initiate tracing using PlacedItem.trace or RasterItem.trace. The resulting PluginItem object represents the vector art group, and has this object in its tracing property.
ie:
myTrace = app.selection[0].trace();
myTrace.cornerAngle = 180;
myTrace.fills = true;
app.redraw();
myTrace.expandTracing();

How to create a flash automatization script?

Here's the situation. I have a font support library, however for each font I have to manually create a new swf file, such as Tahoma_14_bold.swf - which is a lot of work.
I need to create a Flash automatization script (extension or command, NOT AS3 code) that automatically opens up a file, changes the font of a pre-existing textfield on the stage to, for example, Tahoma Regular 10 with bitmap font setting, saves it as Tahoma_Regular_10.fla in a destination directory, compile, then change the font size to 11, save it as Tahoma_Regular_11.fla, compile and so on and so forth, up until all fonts are created.
The end result would be 30 or so swf and fla files for each possible variation of the font.
How would I go around doing this? Is this at all possible?

1. Efficiency:
Application has a fontStyle manager. The application never (outside of debugging purposes) creates textfields by itself. All textfields used to display text are created by a call to the fonts manager, like "fontsStyleManager.createFont("header1");"
As such, each fontStyle has an associated font SWF and other textField parameters. The website owner can specify which particular font SWFs are to be loaded at start, and all unused font SWFs are highlighted, to be deleted of the list.
2. Flash font embedding sucks
Flash embedding sucks. I've had whole projects refuse to compile and not even display any messages. I had fonts that changes sizes and font faces. I've had fonts not embed at all, even though I specified explicitly for them to be included. Embeding by code and at runtime is cleaner, and it works
3. Neccesity
Embedding fonts from Flex embeds all European characters including German, Greek, Norwegian and so on.. except Polish. In here I can specify my own precise character set using the flash IDE.
4. Fonts in Flash are complicated
Normal, vector fonts are embedded easy. Size doesn't matter, as the font can clearly scale to any size and remain nicely anti-aliased. Embeding a Bold style doesn't mean yhou embed a Regular. Bitmap fonts are embeded by font size, that is, embeding a 14px bitmap won't make it possible to use a 16px. In addition, embedding a Bold doesn't embed a Regular bitmap font. What's interesting is that you can take a 12px embed font and set the TextFormat to, say, 22px, and get a very interesting-looking pixel effect, as the font gets scaled up.
5. Flexibility - the ability to see a completely different set of fonts in your project without having to recompile - priceless.

How to find channel mixer?

could someone tell/show me where to find the channel mixer?
Thanks

There is no channel mixer in PSE, but it's available in many of the additional tool sets, like Grant's tools:
http://www.elementsvillage.com/forums/showthread.php?t=51319

How to create thousands of sql scripts easily?

Hello,
I would like to create thousand of scripts as following:
insert into table tb_test('aaa');   update table tb_class( set nm = 'aaa');
insert into table tb_test('basd'); update table tb_class( set nm = 'basd');
insert into table tb_test('asdfa');update table tb_class( set nm = 'asdfs');
insert into table tb_test('xxxyy');update table tb_class( set nm = 'xxxyy');
Is there any simple way to generated those scripts automatically? I am thinking of :
    define var_str = ('aaa', 'bbb', 'asdfd',...'xxxyy');
    select 'insert into table tb_test(' || var_str || '); update table tb_class( set nm =' || var_str || ');'
    from dual;
Then how do I generate those scripts from the var_str?
Thanks,

942572 wrote:
I have more than 5000 parameters in a text file as followings, which can be opened by notepad or excel:
'aaa',
'basd',
'asdfs',
'xxxyy'
Ok, so assuming this is a 1-off event, use Excel.
Setup a quick formula to turn each into a proc call:
[edit] if the values are in column "A", then in column "B", you could do:   =concatenate("p_proc('", a1, "');")
then copy that formula down.
[/edit]
p_proc('aaa');
p_proc('basd');
etc.
Then setup a little p_proc as Frank described. (and please, use a WHERE clause on that update ... or you're going to destroy some data )
Then copy past those commands into a routine that ends up looking like:
declare
procedure p_proc ( in_value )
is
begin
      -- Frank's code goes here
end;
begin
   -- proc list goes here
p_proc('aaa');
..... etc.
end;
That's 1 very primitive way to do it.
If you need to reproduce this in future, you may want to consider loading that list of parameter values into a table, then you can do some more funky things. *shrug*

How to create channel mixer by script

Similar Messages

Maybe you are looking for