How to create check in batch automatically after automatic payment program

Hello
SAP Experts i am getting a  issue
how to create check in batch automatically after automatic payment program ( t code is f110)
Thanks & Regards
Narendra.G

Hi Narendra,
Please note the process below for cheque Printing:-
1. The pre requisite for Cheque printing is you have used program RFFOUS_c/or the Z version of this program in FBZP and that you have maintained the form name in the field Form name for Payment medium in FBZP.
2. You have a pre printed stationary on which you want to print and the Program & the form has been modified to print as per this.
3. In F110, you must have assigned the Variant name, which would specify the cheque lot no. and this should exactly match with the current cheque no. in the pre printed stationary.
4. Now, after all this setting, when you run Payment run in F110, then also only the Payment documents are posted but the cheque no.s are not updated in the Payment document no. nor the PAYR table is updated. It is only when you run the Print out tab, that a spool is created in SP01 for cheque printing as per the Payment documents.
5. Then in SP01, you can print the spool on your pre printed stationary.
This is the complete process of printing cheques from F110. Hope this helps..
Regards,
SAPFICO

Similar Messages

  • How to generate checks when executing Automatic Payment Program (F110)

    Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!

    hi patrick
    try this.....ur problem may solve.....
    Create Automatic Payment Transactions (F110)
    Purpose
    Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
    Trigger
    Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
    Prerequisites
    Open invoices with reached due dates have to be present in the SAP system.
    Menu Path
    Use the following menu path to begin this transaction:
    ·         Select Accounting  Financial Accounting  Accounts Payable  Periodic processing  Payments to go to the Automatic Payment Transactions: Status screen.
    Transaction Code
    F110
    Business Process Information
    The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
    Check payments: clears the open invoices and issues a check output
    ACH payments: clears the open invoices and issues an ACH file output
    Foreign currency payments: clears open invoices but no output is issued
    State/Grant payments: clears open invoices but no output is issued
    The process steps executed during the automatic payment program are:
    Enter Payment Parameters
    Edit/review Payment Proposal
    Post Payments
    Generate Payment Medium (print checks or create ACH payment file)
    Generate Positive Payment File
    The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
    The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
    After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
    In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
    Helpful Hints
    ·         The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
    ·         On certain screens you may have to scroll to view some data entry fields.
    ·         Click the  tab to view the current overall status of the payment process by viewing the informational messages.
    Procedure
    1. Start the transaction using the menu path or transaction code.
        Automatic Payment Transactions: Status
    2. As required, complete the following fields:
    ·         Run date
    ·         Identification
    3. Click the  tab.
    The payment program parameters are used to limit the program's selection of open invoices and credits.
        Automatic Payment Transactions: Parameters
    4. As required, complete/review the following fields:
    ·         Posting date
    ·         Docs entered up to
    ·         Company codes
    ·         Pmt meths
    ·         Next p/date
    ·         Vendor
    5. Click the  tab.
    Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
        Automatic Payment Transactions: Free Selection
    6. Perform any of the following:
    If You Want To
    Then
    Select data by a particular field value; use the match code on the Field Name field to obtain the required field
    Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
    Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
    Example: A (AP payment block)
    Exclude the open items that match your field value
    Select  to the left of Exclude values.
    Include only those open items that match your field value
    Deselect  to the left of Exclude values.
    7. Click the  tab.
    This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
        Automatic Payment Transactions: Additional Log
    8. Perform the following:
    If You Want the Payment Program Log to Record
    Then
    Information on due date check
    Select  to the left of Due date check.
    Activate this option.
    Any payment method selection data
    Select  to the left of Payment method selection in all cases.
    Activate this option.
    Line item information the payment documents generated upon posting the payment proposal
    Select  to the left of Line items of the payment documents.
    Activate this option.
    9. As required, complete/review the following fields:
    ·         Vendors (from)
    ·         Vendors (to)
    Enter the same vendor account number range for Accounts required section of the transaction.
    10. Click the  tab.
    The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
        Automatic Payment Transactions: Printout and DME
    11. As required, complete the following fields:
    ·         RFFOAVIS
    ·         RFFOUS_C
    12. Click the  tab.
        Exit editing
    13. Click  to save the data.
    If you want to delete the payment program parameters entered, select Edit  Parameters  Delete.
        Automatic Payment Transactions: Status (2)
    The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
    14. Click  .
    If you want to refresh the screen in order to view the current status (processing step) of the payment program click  at any time.
        Schedule Proposal
    15. Perform one of the following:
    If You Want To
    Then
    Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
    Select  to the left of Start immediately.
    Activate this option.
    Designate a target computer
    Enter the name in the Target computer field.
    16. Click  to process the payment parameters and create a payment proposal.
    While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
        Automatic Payment Transactions: Status (3)
    The system displays the message, "Proposal run has been scheduled."
    17. Click  .
        Automatic Payment Transactions: Status (4)
    The system updates the status, "Payment proposal has been created."
    18. Perform one of the following:
    If You Want To
    Then
    Go To
    Execute the payment run
    Click  .
    Step 19
    Edit the payment proposal
    Click  .
    Step 43
    Display the payment proposal
    Click  .
    Step 54
    Display the payment proposal run log
    Click  .
    Step 57
    Delete the proposal
    Select Edit  Proposal  Delete.
    Step 60
    Display the proposal list in a printer friendly format
    Select Edit  Proposal  Proposal List....
    Step 62
    Display only the exception (error) invoices or credits
    Select Edit  Proposal  Exception List....
    Step 67
    Exit this transaction
    Step 72
        Schedule Payment
    19. Perform the following:
    If You Want To
    Then
    Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
    Select  to the left of Start immediately.
    Activate this option.
    Designate a target computer
    Enter the name in the Target computer field.
    20. Click  to process the payment proposal and post the payment documents.
    While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
        Automatic Payment Transactions: Status (5)
    The system displays the message, "Payment run has been scheduled."
    21. Click  .
        Automatic Payment Transactions: Status (6)
    The system updates the status, "Payment run has been carried out." If you click  after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
    22. Perform one of the following:
    If You Want To
    Then
    Go To
    Review the payments posted
    Click  .
    Step 23
    Display the payment proposal
    Click  .
    Step 26
    Display the payment proposal run log
    Click  .
    Step 29
    Display the payment list in a printer friendly format
    Select Edit  Payments  Payment List.
    Step 32
    Display only the exception (error) invoices or credits
    Select Edit  Payments  Exception List.
    Step 36
    Print the payment run information
    Click  .
    Step 40
    Exit this transaction
    Step 72
        Job Log Entries for F110-XXXX-XXXX / XXXX
    23. Review the displayed information.
    24. Click  .
    25. Return to Step 22.
        Display Payment Proposal: Payments
    26. Review the displayed information.
    27. Click  .
    28. Return to Step 22.
        Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
    29. Review the displayed information.
    30. Click  .
    31. Return to Step 22.
        List Variant
    32. Click  .
        Payment list
    33. Review the displayed information.
    34. Click  .
    35. Return to Step 22.
        List Variant (2)
    36. Click  .
        Payment list (2)
    37. Review the displayed information.
    38. Click  .
    39. Return to Step 22.
        Schedule Print
    40. As required, complete/review the following fields:
    ·         Start date
    ·         Start immediately
    ·         Start time
    ·         Target computer
    ·         Job name
    41. Click  .
    42. Return to Step 22.
        Accounting clerk
    43. Click  .
        Edit Payment Proposal: Payments
    44. Review the displayed information.
    45. Perform one of the following:
    If You Want To
    Then
    Go To
    Continue with the payment process
    Click  .
    Step 18
    Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
    1. Click on the line you want to select.
    2. Click  .
    Step 46
    Change the key payment information (payment method, house bank, payee name and address, etc.)
    1. Click on the line you want to select.
    2. Click  .
    This option does not work for lines that have exceptions.
    Step 51
        Edit Payment Proposal: Open Items
    46. Double-click on the line you want to choose.
        Change Line Items
    47. As required, complete/review the following fields:
    ·         Payment block
    ·         Discount amount
    ·         Cash discount %
    48. Click  .
    49. Click  .
    50. Return to Step 45.
        Change Payment
    51. As required, complete/review the following fields:
    ·         Payment method
    ·         Pmt meth.supl.
    ·         Due date
    52. Click  .
    53. Return to Step 45.
        Display Payment Proposal: Payments
    54. Review the displayed information.
    55. Click  .
    56. Return to Step 18.
        Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
    57. Review the displayed information.
    58. Click  .
    59. Return to Step 18.
        Delete proposal
    60. Click  .
        Automatic Payment Transactions: Status (7)
    The system displays the message, "Data and log deleted."
    61. Go to Step 72.
        List Variant (3)
    62. As required, complete the following field:
    ·         Variant
    63. Click  .
        Payment list (3)
    64. Review the displayed information.
    65. Click  .
    66. Return to Step 18.
        List Variant (4)
    67. As required, complete the following field:
    ·         Variant
    68. Click  .
        Payment list (4)
    69. Review the displayed information.
    70. Click  .
    71. Return to Step 18.
    72. Click  until you return to the SAP Easy Access screen.
    73. You have completed this transaction.
    Result
    You have executed a payment proposal, executed and posted a payment run and printed checks.
    reward me points.......dont forget

  • Issue with check generation in Automatic Payment Program

    Hi experts,
    I need your inputs for an issue with check generation in Automatic Payment Program. Trying to make a payment to a US vendor with payment method C. The due item is getting picked up and a clearing document is getting generated. But Check is not being generated, niether can I see an entry in PAYR table. However, if I try to generate a check manually in FCH5 for the same clearing document, it is working.

    Have u checked the Variant created in F110 - Printout / data medium, whether the Hose bank details are correctly set or not.
    If yes, check the Printer details
    Let us know the results
    Thanks

  • Configuration of Check printing in Automatic Payment Program

    Hi
    I am able to run the automatic payment program. But I am not sure how to configure check lots and check printing.  Could any one please help me with step by step instruction regarding the configuration required after running the program.
    Thanks
    Hariharan G

    Hi
    For the program RFFOUS_C give Variant(X).
    select maintain Variants button and select continue button.
    give program run date , Identification feature , paying company code , sending company code , payment method , House Bank , Account ID , Check Lot NO..
    Under Print Control
    select Print checks checkbox , give printer name and select print immediately checkbox.
    select Print Payment Advice Notes checkbox , give printer name and select print immediately checkbox.
    select Print Payment Summary checkbox , give printer name and select print immediately checkbox.
    No. of sample printouts (0) and select do not Void any checks checkbox.
    select Attributes button and give description and save.select back arrow.
    select Printout button and select Start Immediately checkbox.
    In the job name for the ? give variant name(X) and enter.
    To see the printed checks from the menu select System -
    >Services -
    >Jobs -
    >Job Overview(SM37) and execute.
    Also go to SP01 and execute.
    we will get the list of spool requests.
    Regards
    Venkat
    Edited by: Venkat Dara on Feb 4, 2009 12:55 PM

  • Skip check no. in Automatic payment program F110

    Dear Gurus,
    I am facing problem while printing chek from F110.
    Actually system is skipping the check no. from check lot and automatically voids the check no.
    Ex.
    1st system printing the check no. 10000 correctly but same time automatically void the next check no 10001 with void reason code 3.  and again printing the check no. 10002 correctly for next vendor.
    Regards
    Rupesh Kumar Singh

    Hi Rupesh,
    The reason is if u go to RFFOUS_C program variant under data tab in F110 then in the bottom of the screen under output control, u need to tick option do not void any checks and also u need to remove the number of sample printouts.
    If u do these two things then no checks will be voided.
    I hope u understood.
    Regards
    Srikanth

  • How to create po through batch run

    Hi,
    how to create po through batch run (through background job)
    Prashanth

    Hi Prashanth ,
    Run the below program as a background job.
    Make sure that inforecord exists for all and automatic PO are ticked in Vendor and Material Master.
    Program : RM06BB30
    Create a suitable variant.
    Job Creation : Tcode : SM36
    Regards
    Ramesh Ch

  • How to create and drop partitions automatically?

    How to create and drop partitions automatically?
    The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
    I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?
    Thank you

    junez wrote:
    How to create and drop partitions automatically?
    The environment is Oracle 10g(10.2.0.3) on the RHEL4.0 system.
    I want to partition the MESSAGE table by date (NUMTODSINTERVAL(1,'DAY') ). One partition per day. Because the table is huge, only 2 partitions (today and yesterday's data) are necessary to be kept online. All the partitions that earlier than the previous day will be backed up and then dropped. I want to make the partition creating and dropping jobs run automatically. How to do it?With 11g, new partitions can automatically be created.
    With 10g, you need to do that yourself. I prefer to create a "buffer" of future partitions - in case the job whose task it is to add new partitions gets held up or stuck. Or the job queue is full due to some problem and it does not get the chance to execute in time.
    I dislike your partitioning criteria. I prefer using the date directly and not mangling it to something else. If a specific day has a large volume of data, then another option is to use hourly date ranged partitions. With local partitioned indexes and the date time range used for querying, this can be quite effective performance wise.
    As for partitioning maintenance - I use a custom written partitionManager PL/SQL package that provides an interface for adding daily and hourly partitions to a table. Input parameters are for example name of the table, start date and the number of partitions to add. Similarly it provides interfaces for aging partitions - again by specifying a table and a date-time to use as the starting point, back into time, for removing old partitions.
    I typically call this code from the actual application code itself - so before a new partition will be used for example, the app code will first ensure that it has a partition to use. This is safer than a separate job as the dependency is resolved where and when it is needed - and not done as a separate task.
    For example - you should have a procedure/package that provides an app the means to log a message into your MESSAGE table. As part of an autonomous transaction, this procedure can check if the required partition exists, before attempting to insert a message into the table.
    Where this approach is not possible, a DBMS_JOB can be used to create future partitions - but as I mentioned, rather have it add a bunch of future (empty) partitions in case something goes pear shape with the job mechanism.

  • How to create check box in tabular form

    Dear Friends
    i have craeaed tabular form .Recently all column are default text field but i want to change some column from text field to check box .
    i have try it with simple check box but there is no option to pass return value in to table.
    How to create check box in tabular from.
    select
    "CLAIM_ID",
    "CLAIM_ID" CLAIM_ID_DISPLAY,
    "EMPLOYEE_ID",
    "CLAIM_DATE",
    "START_FROM",
    "END_TO",
    "REIMB_NAME",
    "REIMB_AMOUNT",
    "REMARK",
    "ACTIVE_FLAG",
    "STATUS",
    "APPROVE_NO",
    "APPROVE_FLAG"
    from "EMP_REIMBURSEMENT_DTL
    {code}
    i want to change column from text field to Check box
    Cplumn Name :
    1.ACTIVE_FLAG Return value 'Y'
    2.STATUS Return Value "APPROVE"
    How to pass it with check box in tabular form.
    Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Visit this demo app:
    http://apex.oracle.com/pls/otn/f?p=31517:1
    Section VI has a lot of tabular form stuff with checkbox handling.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    https://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • How to create check box in ALV Reports?

    how to create check box in ALV Reports?

    Hi
    check the report  BCALV_TEST_GRID_EDITABLE
    or
    check this report
    REPORT ZRFC346_TST.
    TABLES:SFLIGHT,RL034.
    TYPE-POOLS:SLIS.
    INCLUDE:<ICON>,<SYMBOL>.
    DATA: G_REPID          LIKE SY-REPID,
          G_FIELDCAT       TYPE SLIS_T_FIELDCAT_ALV,
          G_IT_SORT        TYPE SLIS_T_SORTINFO_ALV,
          G_LAYOUT         TYPE SLIS_LAYOUT_ALV,
          G_TABNAME_HEADER TYPE SLIS_TABNAME,
          G_TABNAME_ITEM   TYPE SLIS_TABNAME,
          G_KEYINFO        TYPE SLIS_KEYINFO_ALV,
          G_VARIANT        LIKE DISVARIANT,
          G_EXTAB          TYPE SLIS_T_EXTAB,
          I_SLIS_EXIT_BY_USER TYPE SLIS_EXIT_BY_USER.
    DATA: XEVENT         TYPE SLIS_T_EVENT,
          AEVENT         TYPE SLIS_ALV_EVENT,
          VARIANT        LIKE DISVARIANT,
          LAYOUT         TYPE SLIS_LAYOUT_ALV,
          ASP_GROUP      TYPE SLIS_SP_GROUP_ALV,
          GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
          EXTAB          TYPE SLIS_T_EXTAB WITH HEADER LINE,
          XFIELD         TYPE SLIS_T_FIELDCAT_ALV,
          AFIELD         TYPE SLIS_FIELDCAT_ALV,
          G_SUCOMM      LIKE SY-UCOMM,
          G_SELFLD       TYPE SLIS_SELFIELD.
    DATA: SAV_SY_REPID      LIKE SY-REPID.
    CONSTANTS: CON_SFLIGHT TYPE LVC_FNAME VALUE 'SFLIGHT',
               CON_DISPLAY_FULL TYPE I VALUE 3.
    Data to be displayed
    DATA: BEGIN OF GT_SFLIGHT OCCURS 0.
            INCLUDE STRUCTURE SFLIGHT.
    DATA:ACTIVATE(1).
    DATA: END OF GT_SFLIGHT.
    INITIALIZATION.
    *........Initialisierung...............................................
      PERFORM INITIALIZATION_RL034.
    *........Field cata....................................................
      PERFORM FIELD_CAT.
    *........SPECIAL GROUP.................................................
      PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
    START-OF-SELECTION.
    Selection
      SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
    *........ALV CALL.......................................................
      PERFORM ALV_CALL.
      PERFORM USER_COMMAND_LOCAL USING G_SUCOMM G_SELFLD.
          FORM USER_COMMAND_LOCAL                                       *
    -->  G_UCOMM                                                       *
    -->  G_SELFIELD                                                    *
    FORM USER_COMMAND_LOCAL USING G_UCOMM LIKE SY-UCOMM
                                  G_SELFIELD TYPE SLIS_SELFIELD.
      CASE G_UCOMM.
        WHEN 'ACT'.
      ENDCASE.
    ENDFORM.
          FORM ALV_CALL                                                 *
    FORM ALV_CALL.
    Call ABAP List Viewer (ALV)
    G_LAYOUT-BOX_FIELDNAME = 'ACTIVATE'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
                 EXPORTING
                I_BACKGROUND_ID         = 'ALV_BACKGROUND'
                   I_BYPASSING_BUFFER                = SPACE
                   I_BUFFER_ACTIVE                   = SPACE
                    I_CALLBACK_PROGRAM                = SAV_SY_REPID
                    I_CALLBACK_PF_STATUS_SET          = 'STATUS'
                   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND_LOCAL'
                I_CALLBACK_TOP_OF_PAGE            = ' '
                I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
                I_CALLBACK_HTML_END_OF_LIST       = ' '
                 I_STRUCTURE_NAME                  = 'SFLIGHT'
                I_BACKGROUND_ID                   = ' '
                I_GRID_TITLE                      =
                I_GRID_SETTINGS                   =
                  IS_LAYOUT                         = G_LAYOUT
                  IT_FIELDCAT                       = XFIELD[]
                IT_EXCLUDING                      =
                  IT_SPECIAL_GROUPS                 = GT_SP_GROUP[]
                IT_SORT                           =
                IT_FILTER                         =
                 IS_SEL_HIDE                       = 'X'
                I_DEFAULT                         = 'X'
                  I_SAVE                            = 'A'
                IS_VARIANT                        =
                 IT_EVENTS                         = XEVENT
                IT_EVENT_EXIT                     =
                IS_PRINT                          =
                IS_REPREP_ID                      =
                I_SCREEN_START_COLUMN             = 0
                I_SCREEN_START_LINE               = 0
                I_SCREEN_END_COLUMN               = 0
                I_SCREEN_END_LINE                 = 0
                IT_ALV_GRAPHICS                   =
                IT_ADD_FIELDCAT                   =
                IT_HYPERLINK                      =
                I_HTML_HEIGHT_TOP                 =
                I_HTML_HEIGHT_END                 =
                IT_EXCEPT_QINFO                   =
              IMPORTING
                E_EXIT_CAUSED_BY_CALLER           =
                ES_EXIT_CAUSED_BY_USER            =
                  TABLES
                    T_OUTTAB                          = GT_SFLIGHT
              EXCEPTIONS
                PROGRAM_ERROR                     = 1
                OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
          FORM status                                                   *
    -->  EXTAB                                                         *
    FORM STATUS USING EXTAB TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'STAT' EXCLUDING EXTAB.
    ENDFORM.                               " STATUS
    *&      Form  INITIALIZATION_RL034
          text
    -->  p1        text
    <--  p2        text
    FORM INITIALIZATION_RL034.
      SAV_SY_REPID = SY-REPID.
    ENDFORM.                    " INITIALIZATION_RL034
    *&      Form  DEFINE_EVENTS_RL034
          text
    -->  p1        text
    <--  p2        text
    FORM DEFINE_EVENTS_RL034.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
           EXPORTING
                I_LIST_TYPE = 0
           IMPORTING
                ET_EVENTS   = XEVENT.
       exceptions
            list_type_wrong = 1
            others          = 2.
    ENDFORM.                    " DEFINE_EVENTS_RL034
    *&      Form  FIELD_CAT
          text
    -->  p1        text
    <--  p2        text
    FORM FIELD_CAT.
      DATA: LS_FCAT TYPE SLIS_FIELDCAT_ALV,
            L_LIN   TYPE I.
      REFRESH XFIELD.
           1. per Default eingeblendete Felder                          *
    *........Ikone/Symbol..................................................
      CLEAR AFIELD.
      DATA: LS1_FCAT TYPE SLIS_FIELDCAT_ALV,
            L_LIN1   TYPE I.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
           EXPORTING
                I_STRUCTURE_NAME       = CON_SFLIGHT
                I_BYPASSING_BUFFER     = SPACE
                I_BUFFER_ACTIVE        = SPACE
           CHANGING
                CT_FIELDCAT            = XFIELD
           EXCEPTIONS
                INCONSISTENT_INTERFACE = 1
                PROGRAM_ERROR          = 2
                OTHERS                 = 3.
      DESCRIBE TABLE XFIELD LINES L_LIN1.
      ADD 1 TO L_LIN1.
      CLEAR LS_FCAT.
      LS1_FCAT-FIELDNAME = 'ACTIVATE'.
      LS1_FCAT-CHECKBOX  = 'X'.
    LS1_FCAT-KEY       = 'X'.
      LS1_FCAT-INPUT     = 'X'.
      LS1_FCAT-EDIT     = 'X'.
      LS1_FCAT-INTTYPE   = 'C'.
      LS1_FCAT-DATATYPE  = 'CHAR'.
      LS1_FCAT-INTLEN    = 1.
      LS1_FCAT-COL_POS   = L_LIN1.
      LS1_FCAT-SELTEXT_S = LS1_FCAT-FIELDNAME.
      LS1_FCAT-SELTEXT_M = LS1_FCAT-FIELDNAME.
      LS1_FCAT-SELTEXT_L = LS1_FCAT-FIELDNAME.
      LS1_FCAT-SP_GROUP = 'A'.
      APPEND LS1_FCAT TO XFIELD.
      ADD 1 TO L_LIN.
    ENDFORM.                    " FIELD_CAT
    FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
      DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
      CLEAR  LS_SP_GROUP.
      LS_SP_GROUP-SP_GROUP = 'A'.
      LS_SP_GROUP-TEXT     = 'SPECIAL'.
      APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
    ENDFORM.
    Regards
    Shiva

  • How to create shape layer in Adobe After Effects Cs2 ?

    How to create shape layer in Adobe After Effects Cs2 ?

    THere is no such thing. Shape layers were introduced in CS3.
    MYlenium

  • Automatic payment program how to explain in interviewes

    hi friends
    asking automatic payment program explanation in interviewes. how to explain the automatic payment program pls tell me  my mail id [email protected]

    The payment program can be broken down into the following steps:
    1. Define parameters (Parameters TAB on the F110 screen)- Based on the parameters defined the program picks up the vendor 'open' items to be paid and displays them in the payment proposal. The parameters tell the program the following:
        a. Which company codes you want to include in this payment run (If the AP cleark who is running the program is responsible for only North American companies, he/she will include only those company codes in the payment run)
        b. Which Vendor you want to pay (suppose there are lot of AP clerks in an organization, they can use this to restrict the selection to the vendor for whom they are responsible for payment)
        c. What are the payment methods you want to use to pay these vendors
        d. What is the next date when you will run payment run. Based on this date the program picks up all the items which become due till the next date of payment run, even though those open items are not due today.
    2.  Free selection TAB - In this TAB you can restrict the 'open' items you want to select.  You can use any field in the BSEG table and restrict the selection. For e.g. You can select the field ' Document no.' from BSEG and give a range of documents you want to pay. The program will pick up only those documents for payment.
    3. Additional Log TAB - In this TAB you can select the logs you want the system to create if there are any errors or for all items even if there are no errors.  If the results of the program is not what you expected, then you can read the log to understand the reason why the program did not select what you wanted.
    4. Print/data medium TAB - Here you supply the program variant for all the payment methods you are using. For e.g. in US if you use the 'Check' payment method, then in this TAB  you supply the variant for the RFFOUS_C program. If you are using EDI payment method then a variant for the program RFFOEDI1 has to be supplied in this TAB.
    5. Status TAB - Once you enter all the information in the above 4 TAB's you will come to the status TAB.
    Initial status will be 'No Parameters have been entered'
    Before you run the program, the status would be 'Parameters have been defined'.
    After you run the proposal the status will change to 'Payment proposal has been created'.
    After you run the Payment run the status will change to 'Payment run has been carried out. Posting orders: 10 generated, 10 completed'.
    Thus the status tells you in what stage of the Payment program you are in.
    Please note that the buttons you see here is dynamic. Based on the status the button will appear or disappear. But all the functionalities which these buttons offer can also be selected using the dropdown list appearing at the top of the screen.
    6. After you completed the payment run, you have to print the payment media - If the payment method used is check, you print checks. If it is wire then you create the wire file etc. This is the last step in the payment run.
    Important Note: After running the proposal, you should not leave the payment program. Either you should complete the payment run completely , all the way till you print the payment media,  or delete the payment proposal.
    If you do not delete the proposal, then the vendors in this proposal will not be included in any of the subsequent payment runs.
    Hope this helps you in answering your Interview questions.
    Good luck.
    Kalyan

  • Automatic Payment Program-problems with check printing/viewing

    Hello:
    I am new to the SAP field. I have been trying to make the automatic payment program work for me. I have been having trouble trying to view the print preview of checks by going to system->own spool requests.
    Steps followed ---Automatic Payment Program:
    I checked the open invoices -
    FBL1N
    I ran F110 and finally print out with the start immediately option checked
    I checked the open invoices FBL1N again and all the open invoices have cleared
    However I am unable to view the checks that should have printed for this payment run. Can anyone please tell me what I am doing wrong here.
    Thanks,
    Mahesh

    Mahesh,
    Go to F110, Enter the run date and then click enter - After that click on edit and then proposal and proposal list and you can see all the details - which actually runs the program RFZALI20.
    Hope that helps..
    Thanks,
    Nandita

  • How to put default section code in Automatic payment program(F110)

    Hi,
    Is it possible to put default section code(BSEG-SECCO) in transaction code F110 for down payment transactions through Automatic payment program.
    in our company section code is required field for vendor transactions, if i am doing the transaction F-48 or F-53 or F-58 , i can able to give the input for section code, But when i am executing the auto payment against payment request system showing the error message 'Please Enter 1001 As Section Code" based on my validation rule for section code for posting key 29 with account type K
    How to overcome the above section code issue in auto payment without deactivation of validation.

    Hi,
    Just confirm how many section codes you are having.
    If you are having only one section code for your company code then you can achieve this by developing a substitution rule.
    T.code GGB1
    Prerequisite
    BSEG-BUKRS = 1000(give your company code)
    Substitution
    BSEG-SECCO=1001(give your section code)
    Here take constant and give section code manually
    If you are using business area then you need to give business area in prerequisite and respective section code in substitution.
    After you define the substitution you need to activate for your company code through T.code OBBH.
    Revert if you have any queries.
    Regards,
    Sankar
    Edited by: Durgasankar.Innamuri on Jul 30, 2010 12:11 PM

  • How to create  a test plan with specific transactions (or program)

    Hello,
    I'm a new user in Sol Man !
    How to create  a test plan with specific transactions (or program).
    In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
    In my test plan (STWB_2) those specific doesn't appear to be selected !
    Thanks in advance.
    Georges HUYNEN

    Hi 
    In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
    When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
    Also visit my weblog
    /people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
    please reward points.

  • Reprinting check of automatic payment program

    Hi Gurus,
    I want to reprint the cheques generated from automatic payment program in one go.From FBZ5 I can print only sigle sigle chques.But I wanna to reprint all the cheques in one go.
    Kindly reply.
    Regards,
    Abhinandan.

    This depends on which Prog you are using for the Check Printing.
    In case it is RFFOUS_C then run this in SE38. Here you can give the F110 Payment Run identification and other necessary parameters; in the Last Section (re-print checks) of the dialog box you can key-in necessary parameters for reprinting.

Maybe you are looking for