How to create Collection Based on Status Message

It's possible create a collection based on Status Message?
If yes, please post how
tks
Allan

the query given by matthew is WQL but not SQL.you cannot run the WQL query in SQL which do not support.
The error what you get is expected .some of the wmi entries that exist in sms provider may not appear in sccm query design.
Do not click on show query design as sms_statusmessage attributes cannot be retrived .After you
created the WQL Query ,just paste in query box and click Ok (Ignore the error message box).
wait for sometime and see if that display any computers.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

Similar Messages

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to create a gui pf status and guititle in module pool programming?

hi frnds,
how to create a gui pf status and gui title in module pool programming?
my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
plz gve step by step process.

Hi,
For Title:In PBO...just write
SET TITLEBAR 'ZTITLE'.
double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
PF means FUNCTION CODE
ex; set pf-status 'zrstatus'.
double click on the zrstatus expand the application server ,
at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
will appear on the screen.
Details:
PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
Implementing the status for a screen can be done in 2 ways:
1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
Status names can have a maximum of 20 characters.
After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
In transaction SE41,
1) Give the program name and the status name and click on the Create button.
2) Go to 'Function keys' and expand.
3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
Whatever you have typed now becomes the function codes of these icons and can be used in your program.
For example you have a screen 100.
In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
The flow logic for the screen looks like this:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
The code for these modules can be something like this:
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Example'. "Example is the name of the GUI status
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SAVE'.
"call a subroutine to save the data or give statements to save data.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
Regards,
Shiva Kumar (Reward If helpful)

How to create collective invoice output

hi frnds
I have created 50 invoices in (VF01). How to create collective invoice output. What is the procedure?
regards

(Assuming you want to print all the 50 invoice)
Use VF31.

How to create Profile Based Rule in Endeca Studio Developer

Hi,
Can anybody tell me how to create Profile based rule in the Endeca Studio Developer. and how to fecth the data in the JSP. what are the parameter required to pass in the ENEQuery
Thanks
Shailesh

I use visual studio 2012.
I dont see rule set editor which can help me create busineesss rule.
Where can I find it?
Hi Rajesh,
If you want to learn more information about RuleSet Editor in .net framework 4.5, check out https://msdn.microsoft.com/en-us/library/ee960221(v=vs.110).aspx
for more information.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create HeatMap based on Country Credit Rating?

How to create Heatmap based on Country Credit Rating i....
Credit Ratings are AAA, -AAA, +AA, AA, -AA, +A, A, -A, +BBB, BBB, -BBB, +BB....... From Green To Red
Country Credit Rating
Angola
BB-
Botswana
A-
Burkina Faso
B
Ethiopia
B-
Ghana
B
Morocco
BBB-
Nigeria
BB-
Sierra Leone
B-
South Africa
BBB
Tanzania
B
Zambia
B+
Australia
AAA
India
BBB-
Indonesia
BB+
Pakistan
B
Philippines
BBB
Thailand
BBB+
Uzbekistan
BBB
Turkey
BB+
Chile
AA-

Thanks Jim for the solution.
Also, this article should be helpful for you:
Create a Heat Map Using Excel’s Conditional Formatting -
http://peltiertech.com/heat-map-excel-conditional-formatting/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Hi Ethan, If you trying to get points i understand but please do assume that googling is done first.
If you want to get help from others, you should first be polite to those who are trying to help you, rather than "i already new the option of converting to numbers" or "If you trying to get points i understand but please do assume
that googling is done first.".
You didn't make it clear in your initial post that what you already tried, or which articles you already reviewed, how should us people know this?
I'm sorry but here all is asked politely and please, politely do not change the subject.

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
Requiremenst is as follows.
Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
Any help would be highly appriciated!!!

hi,
Using Guided navigation it is possible,
Please refer the below links.
http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
http://businessdecisionsystems.com/blog/?p=448
Hope this help's
Thanks,
Satya

How to create ajax based tabs ..??

Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
Jijo

You need to write your own jsf component for this.

How to create collection (query) based on report results?

Hello everyone,
I have the following report;
I would like to create a collection based on the "Non Compliant" and the "Unable to find compatible TPM" so I can re-deploy with right-click tools.
If the above is NOT the solution to create a group for redeployment. How would I address this?
Thank you in advance for any help.

Unfortunately, there is no straight-forward answer here. ConfigMgr console queries use WQL and only have visibility to a subset of the complete information in the database. Most things you are probably interested in creating queries from are probably visible,
but that's not guaranteed. Additionally, they are named slightly differently also so it really just takes some trial and error and personal investigation to see what is there and what isn't. The place to start is to open the root\sms\site_<sitecode>namespace
on the system hosting the SMS provider. The public reference for most of the classes is at
http://msdn.microsoft.com/en-us/library/hh948405.aspx . These all directly map to data in the database but as mentioned, not all views in the DB have a corresponding WMI class.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to create Idoc based on NAST entries

Hi Experts,
I have a requeriement, on successful posting of receipt i need to send an idoc ORDERS05 using objkey(PO number) of NAST table. How to proceed on this??
Regards
Sridevi S
Edited by: Sridevi Sivanandam on Aug 1, 2010 4:25 PM

hello,
please see the segment for ORDERS05 from WE30 and after that you should have an idea what kind of data you need to pass.
NAST-OBJKEY can contain PO number, article number based on the message / output type fired from GR...
please have a close look at the data being entered in that field...
after that you can relevant data from PO document for creating the IDOC.
Thanks

Newbie - How to create XML based on given schema

Hello,
We have a requirement to create an XML message from our system (Oracle 9iR2 with Oracle Apps 11.5.10). The XML is generated from a query in our HR tables, and must be in a specific format (schema and example XML has been provided to us).
Newbie question is this: What is the best way to create this XML message (dynamic data coming from a SQL select) while ensuring that it matches the given schema? Most of our developers are strong PL/SQL with limited Java experience.
Thanks,
-- John

I've updated the FAQ with an answer and example for this question...
Please see the following thread
How to create XML from relational tables based on an XML Schema ?

How to create the alterable length XML message in WLI workflow?

When I do some development in WLI2.1 workflow, I meet a problem. I need a XML
message to invoke this workflow, and then tailor this XML message and create a
new XML message to send to a certain destination.
Now the question is: The XML message is alterable length, like following:
<ROOT>
<tag1>
<tag2>...</tag2>
<tag3>...</tag3>
</tag1>
<tag1>
<tag2>...</tag2>
<tag3>...</tag3>
</tag1>
<tag1>
<tag2>...</tag2>
<tag3>...</tag3>
</tag1>
</ROOT>
The number of <tag1> is alterable. But I don't know how to create the new XML
message, which also includes the same structure of input XML message, in workflow
"Post external XML Event" action?
I try to use XPath to get the value of each tag, but when I use the following
XPath expression:
XPath ("/ROOT/tag1/tag2/text()")
I can only get the reference of weblogic.apache.xpath.axes.LocPathIterator.
And I also don't know how to define the XML document structure to implement this
kind of alterable length XML message.
Your comments are highly appreciated!

You will need to use substr to restrict the length of the strings returned by extract(). I assume that either the document in non schema based or the attributes referenced are not defined with maxLength restriction in the XML Schema

How to create a verification pop-up message for queries executed on Web

I have implemented the function RRMS_MESSAGE_HANDLING in my customer exit variable code for step 2 in the customer include ZXRSRU01. I am able to get warning and error messages to appear in Bex Excel queries, but not queries executed on the Web. I have also tried implementing these queries in a Web Template which allows system messages and warning messages, but still these messages are suppressed.
Is anyone aware of how to create warning messages that appear both in Bex Excel and Bex Web queries?
Thanks for you help,
Curt Timmerman

On the Comments screen, just select the notes tool to add the note. When you are done, click to close the note.

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to create file based on date value

Hi
Hope you'll help me. I can't find right way to tackle the problem. I need to read a file which name is created based on month and years' value. File name format is as follows: INMMYY.log. So to read it I must create File object using this file name format. I tried to use Calendar class get necessary information using get() method. Unfortunatelly returned month's value is always 2,3,4 and so on..(I need 02,03). There is problem with year's value als. It's returned in form YYYY but I need YY.
Does anybody have any idea how to create string INMMYY in the easiest way ??
Thanks in advance :)

Use java.text.SimpleDateFormat.

How to create Collection Based on Status Message

Similar Messages

Maybe you are looking for