How to create compostite attributes in Sap bw

Assume that my master table has the foll columns
cust_mast
cust_acct number
cust_acct_seq_no number
primary key -- [ cust_acct & cust_acct_seq_no.]
Please let me know on how to implement the same.

HI
Go through this thread
About Compounding Attribute
Thanks
khaja

Similar Messages

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to creat purchase register in SAP r/3 system?

Dear All,
Please tell me how to creat purchase register in sap R/3 system.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

Proceedure of how to create a logo in SAP R/3

Dear Techie's,
Please tell me the Proceedure of how to create a logo in SAP R/3 and how to include in the ALV.
I suppose its to be included in the ALV_comentary_write function module.
Please guide me in full.
Regards,
-=Virendra=-

HI,
Please follow below steps
(1)Create a class name
SBDSV1 (TRANSACTION) --> New Entries --> Class name (SOME NAME) --> Class type (OT).
2)After entering the above details and saving, the fields Class object name fields   will be blank, make entries as shown below .
1)     Class : BDS_LOC1
2)     Class : BDS_POC1
3)     Class : BDS_REC1
4)     Object name : BDS_CONN00
3)- Now next time logging in to OAOR you can directly refer to this Class name.
4)1)     Go to transaction OAOR, give the class name created.
   2)     Give class type as OT
   3)     Give some name in object key its like sub folder
5) a) Click on create drag down standard doc types will get no. of option chose one
    b) double click on the class name in this new screen.
    c)in the below screen are, you have tabs for details,documentinfo,keywords,create, click on create TAB,
   d)By double clicking on screen you can browse the folder where image is located and select it
   e)Once the image is selected it will be stored in the folder that is created with object key
6) now double click on the image you uploaded & in below screen area select the Details tab, you will get object id,use this object id & code as below
7)form FILL_EVENTS .
DATA: wa_events TYPE SLIS_ALV_EVENT.
CLEAR: LS_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   IMPORTING
     ET_EVENTS             = LS_EVENTS
wa_events-form = 'STD_TOP_OF_PAGE'.
MODIFY ls_events FROM wa_events TRANSPORTING FORM WHERE NAME =
'TOP_OF_PAGE'.
CLEAR: wa_events.
endform.                    " FILL_EVENTS
FORM STD_TOP_OF_PAGE.
DATA: it_listheader TYPE SLIS_T_LISTHEADER,
       is_listheader TYPE SLIS_LISTHEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_listheader[]
     I_LOGO                   = 'ZTEST' "this is object id mentioned in 6 step
    I_END_OF_LIST_GRID       =
ENDFORM.
Regards,
Raghavendra

How to create report writer in sap?

Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

How to create a condition in sap

Hi all,
How to create a condition in sap
i want to create a condition in sap quotation. how to solve this issue please give me idea step by step.
[http://www.4shared.com/document/MQiBd3bP/screenshot.html]
Thanks & Regards
Ambrish
Edited by: ambrish dwivedi on Feb 28, 2011 12:29 PM
Moderator message: not related to ABAP development, please do some research before asking.
Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

Hello Ambrish,
Which condition are you talking about ?
is it the calculation you want to do in ur driver program or kind of routines which are used in Pricing ?

How to create user groups in SAP

Hello Gurus,
Can anyone let me know how to create user groups in SAP-HR Module and who will be creating the user groups.
plz provide me the steps.

Hi Stephanie,
IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
Please refer the below links:
http://scn.sap.com/thread/1653026
http://scn.sap.com/thread/1682721
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
Thanks,
Madhav.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create a map in SAP BI???

Dear SAP BI Experts,
I have a difficulties to make a map in BI and missed the steps procedure how to create a map. I have an ESRI CD Map and Arc VIew application. What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
So sorry for stupid question!!!
Thank you very much for your time and help.
Best Regards,
Rudy (SAP BI Team)

Hi Nirmansyah,
Please check the below link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
Hope this helps.
Veerendra.

How to create an attribute dimension in Essbase Studio?

I cannot figure out how to create an attribute dimension using Essbase Studio. The online help states that I need to "Find the Attribute settings grouping in the center" of the member properties dialog box. I suspect that I'm having a problem figuring this out because I don't have the attribute dimension properly defined in the relational data source or in the mini-schema. I've tried creating a table with no key relationship to the other tables and with no logical joins defined, but that doesn't seem to help. Any ideas?

so in the 11.1.1 version you would click on the member name in the hierarchy you added to the Essbase model and in the center pane of the general tab should be the attributes settings section.
If I had a dimension called stores wth two groupings unser it region and store_type, I would click on store_type and add the attribute info

How to create interactive map in SAP Visual Business using SAP UI5 SDK

Hi,
Please tell me,
How to create interactive map in SAP Visual Business using SAP UI5 SDK.
Is it possible to create interactive map using VB Control in SAP UI5 SDK..?
if possible please any one let me know.

Hi folks, one question:
We have our development close moved and now it is earlier than originally planned.
That means that we maybe can't finish our convenient API and you have to wait till we will release it - early 2015 is planned.
But there is another option:
Currently we have a API based on json. The developer has to create json and to transfer it to the Visual Business control.
This interface is more used as a low level API and we are developing on top the more convenient one. So all the features are the same.
It will stay stable & compatible in the future and you can build on it.
Do you want to use this interface?
Then I will publish the documentation.
Let me know.
Thanks

How to create a attribute for a table

I am created a table with four columns.
How to create a attribute for each column.........

Hi Cranjith Kumar,
First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
Reward points if useful.
Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM

How To create a rebate in SAP relating to a product group (3 digit). ??

How To create a rebate in SAP relating to a product group (3 digit). ??

Client requiremnt he has sent a mail to me -:
Kim (from Benelux) wants to create a rebate in SAP relating to a product group (3 digit).
We have seen that we can make rebates on product id, product line (2digit) and on material group (4 digit).
Can you please check if this is possible? If not, is a LRFC enough?
Thanks Br
Gaurav Vazirani

How to create an Attribute set

Hi Everyone,
i am learning OAF....right now going through PPR.I was referring the sample tutorials where i came across attribute sets in the PPR Example, which i believe were created as per requirement.So not able to proceed further till i get some clue abt how to create an attribute set as per my requirement.Tried to refer dev guide but not able to grab the concept
Can anyone tell me where exactly do i need attribute sets(i am only aware that it is used to provide the look n feel to the browser) and how to go abt creating one.
Thanks
Amrita

Thanks for replying
i'd like u to see the PartialPageExample in sampleLibrary project..There is a function being called in the CO from SampleBrowserAM which is
public void handleSupplierSelectionEvent()
OADBTransaction txn = getOADBTransaction();
String detailTableText = null;
// Find the selected radio button so we can mark the current row.
OAViewObject vo = (OAViewObject)findViewObject("SuppliersVO1");
// Get the first filtered row.
Row masterRow = vo.getFirstFilteredRow ("SelectFlag", "Y");
if (masterRow != null)
vo.setCurrentRow(masterRow);
String supplierName = (String)masterRow.getAttribute("Name");
MessageToken[] tokens = { new MessageToken("SUPPLIER_NAME", supplierName)};
detailTableText =
txn.getMessage("AK", "FWK_TBX_SITES_FOR_SUPPLIER", tokens); }
else
// If there are no selected rows, display a default generic message.
detailTableText =
txn.getMessage("AK", "FWK_TBX_SUPPLIER_SITES", null);
// Now set the text message on the DETAIL_TABLE_TEXT attribute in
// the application properties VO.
SampleBrowserPVOImpl appPropsVo = getSampleBrowserPVO1();
Row appPropsRow = appPropsVo.getCurrentRow();
if (appPropsRow != null)
appPropsRow.setAttribute("DetailTableText", detailTableText);
} // end handleSupplierSelectionEvent()
i am not able to understand the text in bold in the code above.how do i refer to it, where is it stored, what is it doing , and it is maybe specific to the supplier table coz i cannot use it for my custom table...can u pls explain

How to create compostite attributes in Sap bw

Similar Messages

Maybe you are looking for