How to create cost element in mass
Hi All
I want to create cost element in mass. i created to new GLs . and now i want to create there cost elements in more than 60 company codes . is there any way to create it in mass . please suggest with t.code
Thanks in Advance
Nikhil
Yes you can create cost elements in a batch session automatically.
Please use tcode OKB2 for default settings.
Define batch input session - OKb3
Execute batch session : SM35
Regards
Similar Messages
-
How to create cost element in controlling
how to create cost element in controlling for Direct meterail.
i have to create for each materail or on rm consumption is enough
please give me replay
thanksHi Nagaraju,
First you create the required account as cost element through FS00 and select your gl account and edit cost element and give 1 in cost element category.
Afterwards in OKB9 You create the cost element whether it is required for Bus Area mandatory, profit centre mandatory and Valuation area is mandatory. Based on your selection you have to assign 1, 2 or 3. Ex. You have selected for consumption account profit centre is mandatory. You give 3. and you have to assign the cost centre against profit centre. Then automatically your consumption will post to the cost centre.
BSR -
How to extend cost element to controlling area?
Hello all,
I created a new cost element via FSP0 and then created cost element via KA01.
Now whwen I am trying to do cost center assignment in OKB9, it throws me error that cost center in controlling are not exit for today's date with error message KI217
I made sure the cose center's validity date cover's today, so why does it show me that error?
Do I need to extend the cost center for perticular controlling area? if yes than how acan I do it?
Regards,Hi,
if you want to extend validity period for Cost centre - KS02 & for Cost element KA02 and select particular Cost centre & Cost element - go to edit in main menu - select Analysis Period - press F6 - and change valid period as per your requirement
but we can't change one controlling area to another controlling area ,
if you do not want use cost centre , cost element whatever already created - just go and Block/lock for posting
Thanking you
Regards
Mahesh -
Mistake in creating cost elements
Dear Guru's,
By mistake, Sale revenue GL accounts have been created as cost elements under "01" category instead of 11 category.
Due to this mistake, Sales values are not flowing to COPA,
Please help me in this regard, how to correct it.
Regards
AnujHello,
If you have dependent data (actual and/or planning data) on the cost
element for the fiscal year there is no way to change the category type
until the next fiscal year. This is to prevent inconsistency in the data
for a given fiscal year.
What I can advise is to change the validity period of the cost element
as of the next fiscal year in KA02 to change the master data in
relation to the cost element type. This should be no problem.
In case you need to execute this change for periods where you already ha
postings on the cost element, all the previous postings to this cost ele
within the fiscal year need to be reversed or deleted. In most cases thi
not easily possible - so it mainly depends on how many postings you have
made to this cost element. In case you can remove the previous CO-docume
use note 175522 by deleting the postings with report ZKACOR21.
Delete all the actual postings for the particular cost element\fiscal
year combination so that there are no dependant entries in the CO tables
There are entries in the following tables COEP, COSP, COSS and
COKA.
Notes 37093, & 38955 that explain how to delete cost elements
where there is dependent data.
"the cost element can only be deleted, if you delete first the entries
of following tables: COEP (CO object: period-related line items),
and with the information document number and line item of COEP you can
delete the entries in table COBK (CO Object: Document header). The name
of the summarized table is COSP (CO Object: Cost Totals - External Post
ings). The last table is the most important one it is the control table.
The Transaction KA04 will select this table before deleting a cost elem
ent. Its name is COKA. If you delete all entries it should be possible
to delete your cost element."
Even if the COEP table line items are 'zeroed out, they are still
considered as line items. Please review your COEP table. If there
is a posting to the cost element, you can reverse the posting so that
that the cost element has a zero balance, ('zeroed out'). Then please
review attached note 175522 and try running report RKACOR21 described
in the note. Please try this in your test system first.
Please try this way to delete table COKA/COSP entries:
-run report:RKACOR20(refer to note 45122) to delete the CO documents
for the GL doc and its reversal document
-run report:RKPLNC27 (refer to note 549760) to delete zero records in
table COSP (with parameters:object number,fiscal year,version)
-Then run report:RKPLNC25 to delete dependency record in table COKA.
br, Guido -
HOW TO Create variants for transaction MASS on LFA1 object?
hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PMHi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank. -
Error while Creating cost element under category 90
Dear Experts,
I have some Balance Sheet related G/L account, which I have created as cost element through transaction KA01, system gives an info message saying its an BS related account, if I ignore that message and proceed further it creates a Cost element with category (system automatically picks the category and the field gets into gray mode) 90.
We have created one more BS G/L account today and trying to create the cost element for the new G/L account, system is producing an error message:
G/L account 3200220 is a balance sheet account
Message no. KS036
Field status group R005 Material accounts is maintained
Can some one guide me to rectify this error?
Thanks in advance,
Regards,
PraveenHi,
The use of cost element category 90 is only provided
in the following two cases (note Note 75980):
1. asset acquisitions and down payments which are
assigned directly to a fixed asset or asset under construction can
be assigned to an account on internal orders or WBS elements
statistically.
2. cost elements of category 90 can also be created
for material stock accounts to display material make-to-order stocks
on sales orders or customer projects.
If you G/L account does NOT correspond to the standard cases 1) or 2),
you can (on your own responsibility)
both deactivate the account assignment
check in the CO interface (message KI098) and when you create cost
elements (message KS036). Both checks are deactivated by maintaining
Transaction OBA5. Deactivate message KI098. Message KS036 cannot be
deactivated directly with Transaction OBA5 - rather, it is deactivated
indirectly when you deactivate message KI098.
The message must be DE-ACTIVATED. Please do not set it to any other
type. Please proceed as follows:
Please call OBA5 in the production system - if not set to changeable
please do this in Your development system.
In OBA5 choose KI and in the detail screen add 098.
Then set the type of warning to "-".
Best regards,
MLM -
How to create account group in mass
Hi, is there anybody who knows a BAPI to create account group, this process is normally made from KDH1, but I want to create a thousound of groups and i think that the best way is an ABAP program.
Regards.Yes you can create cost elements in a batch session automatically.
Please use tcode OKB2 for default settings.
Define batch input session - OKb3
Execute batch session : SM35
Regards -
Creating Cost Elements for OBYC Accounts
Hi
We are implementing COPA and we have manufacturing scenario (MTS) also. Now i have created cost elements (with category as 1). Now its giving me error for CO object when i post any SD entry (at the time of PGI and releasing billing document to accounting) or MM entry (MIGO / MIRO). So please help me cost elements needs to be created for following accounts:
Price difference A/c
Rounding off A/c
Small difference A/c
If i do not create it as cost element, will it effect my COPA / Product costing / Cost center planning.
Please helpWe are implementing COPA and we have manufacturing scenario (MTS) also. Now i have created cost elements (with category as 1). Now its giving me error for CO object when i post any SD entry (at the time of PGI and releasing billing document to accounting) or MM entry (MIGO / MIRO). So please help me cost elements needs to be created for following accounts:
Price difference A/c
Rounding off A/c
Small difference A/c
If i do not create it as cost element, will it effect my COPA / Product costing / Cost center planning.
When your postings hit CO (COPA) from Billing the system is expecting the Real CO Object (e.g. Cost Centre, Internal Order, WBS, Profitabilit Segment etc) to be Profitability Segment.
The RWIN interface (program group that posts to FICO - includes COPA) is checking and finding that there are Cost Elements created for the 'account determination' (accounts determined in Billing) that have a Cost Element category of 1 and I assume that you have determined these postings should go to COPA. Thus the error.
For CE Cat 1 (Primary costs/cost-reducing revenues) the system expects a Cost Object that is not a Profitability Segment.
The solution is to not create them or to use CE Cat 11 or 12 which allows Prof Segment.
Take into account the fact that if you are using the Reconciliation Ledger then CE Cat 11 or 12 should be used (i.e. adding the REAL (not statistical) postings in COPA + Cost Centre Accounting + WBS + Internal Orders = FI P&L).
Please test the use of CE Cat 11 or 12. The problem is that if you have already posted to the old CE's you will need to create new ones as you can't change CE cat once posted to.
The Business Analyst Question would be: Where does the Business want to see the REAL postings of Price Difference, Rounding Off and Small Difference? In COPA (then see above explanation - I would assume the Business want it here) or in Cost Centres (adjust your config and use CE cat 1).
Hope this helps. -
Hi,
How to create costing key and wwhere to assign for value fields.Kindly provide me the Tcodes for the same.
I will assgin poiints
Thanks
SunithaHi,
The tcode to create costing key: KE40
The tcode to assign value fields: KE4R -
hi all how to create cost centre
regards
JK raoHi,
look here
http://help.sap.com/saphelp_47x200/helpdata/en/f7/399b394bdb056de10000000a11402f/frameset.htm
pls reward useful answers
thank you
Andreas -
Error when createing cost element
Dear Friends ,
Following error appering when createing cost element , please suggest and explain the process in details ,
Create the G/L account 94100040 first
Message no. KS034
Diagnosis
You chose the function "Create primary cost element". Primary cost elements/revenue elements must have an equivalent in FI, meaning the account must already exist as a G/L account in FI. Account 94100040 was not created in FI, so you cannot create it as a primary cost element.
Procedure
Check whether you need to create cost element 94100040 as a primary cost element and for what purpose it is to be used for.
If the cost element is to be assigned to accounts in FI, create a G/L account in an FI company code.
Manually create G/L account
If it is not to be assigned to FI accounts (additional CO costs), it suffices to create the G/L account as a chart of accounts item.
Create G/L account in chart of accounts
You can create the cost element as a secondary cost element in CO. This does not require an equivalent account in FI.
Regards
RaghuHi,
use T.code FS00 and enter G/L account number and co.code and enter required details and in application tollbar click edit cost element and enter required details.1st consult FICO consultant for above and use of G/L account group and other details for creating G/L.You can cretae Cost Element in t.code: KA01 also.
For more check the links to Create Primary and Secondary Cost Elements
http://www.copacustomhelp.state.pa.us/infopak/nav/finance/controlling/file1402/index.htm
http://www.copacustomhelp.state.pa.us/infopak/nav/finance/controlling/file2595/index.htm
http://www.sap-basis-abap.com/sapco004.htm
Regards,
Biju K -
How to make cost element field appear when create network activity service
Hi All,
Please help. We create a project ,wbs and network activity using external service. How can we make appear the cost element when the service master appear. The system require cost element but we cannot see the cost element field.
Steps :
*. CJ20n.
*. Create WBS and network header
*. Then network activity for external service.
*. Then it appears service specifications : ext specs Task List Maintain
*. I Put Service no, and the error message appears :
Please enter a cost element
Message no. SE121
*. But we can find where the cost element is. It seems the field disappear.
PLease help.
Thank you.
NiesHi,
Yes. It is already blank. But the cost element field still not appears when we create activity service. It shows :
Please specify a valid account assignment
Message no. SE181
Diagnosis
You have entered an account assignment category in the document item for which an account assignment is mandatory.
All account assignment lines in the service specifications either have been deleted or are inactive (e.g. account assignment lines of a contingency item).
Procedure
Please enter an account assignment for the services or value limits.
The entry of an account assignment is unnecessary if you choose "unknown account assignment" in the document item. -
How to create UI element in VC
Hi,
I want to create UI element in VISUAL COMPOSER like text field, input field, button etc.How we can develop in VC iView?
Thanks,
KundanHi,
Refer
http://www.sdn.sap.com/irj/sdn/nw-vc;jsessionid=(J2EE3417200)ID1217882450DB11101197022981941087End?rid=/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Regards,
Manivannan P -
How to create dynamic elements in action of a view?
hi all,
I created 2 buttons dynamically in WdDoModifyView(). I created action1, and parameter for that action i.e, id of type string.
when i click on button1, some ui elements must be displayed.....
can anyone tell me how to dynamically add UI elements in onAction() of view.....
i wrote the following code to create & map dynamically in WdDoModifyView()........
if(firstTime)
IWDButton b1=(IWDButton)view.createElement(IWDButton.class,"button1");
b1.setText("Button1");
IWDButton b2=(IWDButton)view.createElement(IWDButton.class,"button2");
b2.setText("Button2");
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
tc.addChild(b1);
tc.addChild(b2);
IWDButton butt1 = (IWDButton)view.getElement("button1");
IWDParameterMapping pm1a = butt1.mappingOfOnAction();
pm1a.addParameter("id1","link1a");
IWDButton butt2 = (IWDButton)view.getElement("button2");
IWDParameterMapping pm1b = butt2.mappingOfOnAction();
pm1b.addParameter("id1","link1b");
after writing this..... in onAction().........of view... i wrote like this...
if (id1.equals("link1a"))
else{
in the if & else condition, i have to create UI elements dynamically.
when i am trying to create Ui elements dynamically, but i am unable to create dynamically here.
pls give me suggestion how to proceed this
regards,
vilaHi Vila,
Are you trying to create UI elements dynamically in the action? If yes then you won't be able to do so because you can only create UI elements dynamically in WDDoModifyView().
Always WDDoModifyView() would be called after your action. So, you can handle it as you want in your WDDoModifyView() itself.
But if you want that those elements should be created everytime when you fire an event then don't write it within if(firstTime) clause as this would be true only when WDDoModifyView() is called for the first time when the page intially loads.
Regards,
Murtuza -
How to create an element in component controler
Hi Experts,
I need to validate the data of a model node in component controler and add those validated records in other value node. For that I need to write a loop where in i can repeat the records for validation.
How can i create the element in the loop ? I tried with below code as we do in View controler , but ! this is not allowing in compoent controler. Is there any way to do this ?
IPrivateFinalTRAView.IFirstOutputElement FFM = wdContext.createFirstOutputElement();
Regards,
SureshHi,
i am trying to copy all the resords from a model node to the value node which is available in the component controller,.
after executing the model i am doing this copy operation, for the requirement i ahve converted some of the data into STRING type.
int SalHistSize = wdContext.nodePt_Salhistory().size();
// Populate Salary_History Table
ArrayList arlQuotaTable = new ArrayList();
// Creating the element for our Salary History Node
IPublicFcCompHistory.ISalary_HistoryElement objsalhistnode = null;
if(SalHistSize > 0){
for (int k=0;k<SalHistSize;k++) {
IWDNodeElement elementSalHist = wdContext.nodePt_Salhistory().getElementAt(k);
objsalhistnode = wdContext.createSalary_HistoryElement();
objsalhistnode.setAction_Date(elementSalHist.getAttributeValue("Action_Date").toString());
objsalhistnode.setAction_Reason(elementSalHist.getAttributeValue("Action_Reason").toString());
objsalhistnode.setAction_Type(elementSalHist.getAttributeValue("Action_Type").toString());
objsalhistnode.setAnnual_Salary(elementSalHist.getAttributeValue("Annual_Salary").toString()+" (CAD)");
objsalhistnode.setCompensation_Sal(elementSalHist.getAttributeValue("Compensation_Sal").toString()+" (CAD)");
objsalhistnode.setPay_Area(elementSalHist.getAttributeValue("Pay_Area").toString());
// Adding the record to array List
arlQuotaTable.add(objsalhistnode);
// Bind the populated Array List to the View Table for Data population
wdContext.nodeSalary_History().bind(arlQuotaTable);
Try this dear,
Cheers,
APPARAO
Maybe you are looking for
-
My preview crashes every time I try to open it since the Maverick upgrade. Any thoughts?
-
How to create and assign a help document to INFO button on ALV grid
Hi All, Can somebody tell me how to create an 'END USER DOCUMENTATION' document and the 'FUNCTION MODULE' to call it and display in the form of F1 help screen. OR Is there any standard method to call & display a help document, when the user clicks th
-
TO:Jan Vervecken and Others RE display msg box
First of all, thanks a lot for response. But I still need further clarification in regarding to displaying error message in a popup message box: 1) The form has a user name input box and a password input box 2) In the action class, which returns an e
-
Migration From Xcelsius 4.5 to Xcelsius 2008 with SP3
Xcelius 4.5 using Live office XI Release 2 to access data. SWF file is published in BOXI R2 . Company is upgrading from BOXI R2 to BOXI R3.1; from Xcelsius 4.5 to Xcelsius 2008 with SP3; From Live Office XI R2 to Live Office XI 3.1 Planning to use Im
-
I have updated my credit card information. This is an 80 page book. I get to "your book is being prepared" and then get on hourglass after it is 1/5th through. Any ideas?