How to Create Crystal System in the System Configuration
Hi
I am trying to integrate Crystal system in the Enterprise Portal.
When i am trying to create i am not able to see the Crystal Report System in the System list.
Please let me know how to configure (Intigrate) Crystal System in the portal and how to show the crystal report in the iview.
Please help me its very urgent.
Thanks
MMukesh
Hello,
You dont create a crystal system in System Configuration.
You create a normal SAP system. There are 2 properties: Host name and Path of Crystal Enterprise system. You give that there.
Prem
Similar Messages
-
How to create a system tablespace as locally manged in 8.1.7
After a good time looking for it I still haven't found an example of how to create a database with the system tablespace as locally managed in release 8.1.7
I'm trying this, that isn't OK at all:
create database CSR
character set "WE8ISO8859P15"
datafile '/home/oracle/create/CSR/system/sysCSR.dbf' size 75M
extent management local
DEFAULT TEMPORARY TABLESPACE tsp_temp
DATAFILE '/home/oracle/create/CSR/temp/tempCSR.dbf'
SIZE 80M REUSE
logfile '/home/oracle/create/CSR/redo/redo1CSR.log' SIZE 500k,
'/home/oracle/create/CSR/redo/redo2CSR.log' SIZE 500k,
'/home/oracle/create/CSR/redo/redo3CSR.log' SIZE 500k;
Can someone tell me what is wrong, please?I'm trying this, that isn't OK at allAre there any errors? can you explain what is not "OK"?
-
How to Create a system in portal server
I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much. -
Hi,
I wanted to know how to create a system in VC without integrating with NW04s?
when i click on Find data i am not getting any list in systems.
Please let me know how can i get it
Edited by: Kavitha Bhat on Feb 11, 2008 12:04 PM
Edited by: Kavitha Bhat on Feb 11, 2008 12:05 PMhi kavita,
Go to Tools->Options
1) Uncheck (Mask unsupported features).
2) Try changing Runtime to Dynpro.
Hope this will solve your Prob.
Awards will be welcomed!!!!
Regards
parth
Edited by: Parth on Feb 12, 2008 3:13 PM
Please close the thread is your question been answered -
How to create Source System in BI 7.0
Hi Experts,
How to create Source System in BI 7.0, please urgent
ThanksHi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
® -
How to create a system parameter in Apex
Hi friends,
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
Regards,
Pradeepbluerose wrote:
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
What is "a System Parameter in Apex"? What "privileges" are used to create one?
You'll find it easier to get help if you use terminology that is familiar to everyone... -
Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
KellyHi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano -
Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan RHii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull. -
Hi how to create logical systems.
Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub -
How to create file system datagrid in flex web application
how to create file system datagrid in flex web application
Hi,
Check this out:
http://shigeru-nakagaki.com/flex_samples/FileReference/FileUploadExample2/FileUploadExampl e2.html
Johnny
Please rate answer. -
How to create many user in the same database
hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^TYou need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron -
How to create crystal reports using MSDE 2000?
Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I am using Crystal report 8.5. My Database sqlserver 2000. I generated reports and are working fine.
Now I want to use MSDE 2000 instead of Sqlserver 2000 due to license factor.
My application is developed in VB 6. The all the parts of the application is working fine except the report.
All reports produced Database DLL error.
So I opened the report and try to verify the database. But it gives pdssql.dll not found. Database error.
After this error, I tried to create a new report and found that there is no option for MSDE 2000 database selection under more database.
I usually select Sql server 2000 database under More Database option of location wizard.
How to create crystal reports using MSDE 2000?
Is it due to crystal report 8.5 verison problem? I also have crystal report 11 licensed copy.
Please give me the good solution as early as possible
RegardsS. MuhilanTo use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
How to create a group on the iPhone 4S?
How to create a group on the iPhone 4S?
yes By using this group will it use the cell phone numbers?
-
How to create a table in the file using java code.?
HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
PhaniHi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,
Maybe you are looking for
-
How can I go back to google maps instead of apple maps?
Apple maps are very very very bad. Is it possible to go back to google maps. I come from Spain and maps doesn't work. Always finds what you are not looking for and what you want does not exist in 75% of searches. You find places and apple maps is not
-
ID CS5.5 IDML file and missing plug-ins...need help
I'm currently running ID CS5.5 and trying to open a CS5 file, ( I think). However, even after converting it to a IDML file extension it just hangs and forces me to shut down. The whole purpose of this is there are several plug-ins including InBooklet
-
Automatic Clearing (OBYA)
Dear Expert, i've 2 CoCd A and B which use differnet Purchase Org and Sales Org. B is a customer A and A is a vendor for B. If B make Purchase Order to A and A make Sales Order to B. how to set automatic posting in OBYA ? In CoCd A i had make Account
-
Missing iphoto when syncing MBP w/ iPad2
Hi. I have an iphoto event on my MBPro that I cannot get to sync to my iPad2. I've tried sync-nothing to clear the iPad and then sync-everything, still no luck. Any ideas appreciated.
-
Edge 2013 does not discover all Exchange servers in the org
We have the following co-existence setup: Edge 2013 sitting on the DMZ. 1 CAS 2013 1 MBX 2013 1 CAS/HUB 2010 1 MBX 2010 After creating a new edge subscription on the edge server and successfully completing it on the 2013 mbx server, when I run get-ex