How to Create Custom 0VTYPE (Value Type for Reporting)

For the project I'm now on. There is a need to "create" or "customize" the Value Type for Reporting. I now there are in a Field Called WRTTP in R/3 (Controlling). Is there a way to create or maintain those "values" for the Field WRTTP so it can be brought to BW as a 0VTYPE Charaterictic Master Data.
Remember that Master Data should be consistent within the Business Language and the Systems that support it.
Message was edited by: Jesus Cova Graffe

Kamal, that's an option, but then it wouldn't be consistent to what R/3 has as Master Data. So we're looking to "customize" the WRTTP values in order to take them from R/3 to BW.
Message was edited by: Jesus Cova Graffe
Message was edited by: Jesus Cova Graffe

Similar Messages

  • How to ceate a new Country key,currency ,version and value type for report

    hi,
    can you please let me know How to ceate a new Country key,currency ,version and value type for report
    along with tables and tcodes.
    thanking you

    Not clear on your comments
    How to ceate a new Country key,currency,
       version and value type for report
    because in one line you are saying you want to create Country Key, which means your requirement is in some transaction whereas at the end, you say for report.
    Can you let us know you want to develop a report and if so, from which transactions, you want to take datas.  You have to be clear on this.
    thanks
    G. Lakshmipathi

  • How to create custom member in excel BPC report?

    Hi Everyone,
    Hope you are doing good!!
    I have bit confusion on custom member and how to create custom member in excel bpc report.
    Can you please explain me on this with example.
    Thanks,
    Amit

    Hi Amit,
    Take look at below thread might be helpful for you.
    Refer page no 206
    https://help.sap.com/businessobject/product_guides/boeo10/en/EPMofc_10_user_en.pdf
    and
    Best Practices For Reporting Against SAP Business Planning and Consolidation (Powered by SAP HANA), utilizing the EPM Ad…
    Hope this will help you

  • Value Type for Reporting

    Hi all,
    In many reports I have seen Value type for Reporting ,what is that and why it is used?
    Thanking all who spare time in watching

    It's an indicator that distinguishes between costs such as:
    Actual costs -04
    Planned costs -01
    Target costs  -05
    Etc.,

  • How to create a new document type for PO and Requisition

    Hi All
    Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly. 
    Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
    Thanks, Ros

    Hi,
    1. You can create new PR and PO docu types at the following path:
    For PR docu type:
    First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
    Then create PR docu type at below path and assign no. range to PR docu type here only
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
    For PO docu type:
    Follow same procedure as mentioned for PR docu type. Path is
    SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
    SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
    If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
    Regards
    Chetan

  • How to create custom Item Renderers List for mobile?

    Hi,
       I have seen many samples using List with Item Renderers (image, label, message below the label and decorator) for mobile apps.
    But what I need is, I need to create a List with the below items.
    Item 1. Image
    Item 2. a small icon
    Item 3. Label with 1 or 2 lines
    Item 4.  a Favourite button (like Favourites + or - button). If I like this item, I add it into my favourites list
    Item 5. decorator arrow > to go the Detail view.
    I am new to Adobe Flash Builder and Flex development. Can anyone show me some samples on how to do this?

    Method One:
    I have created simple application page and i used powershell command(Set-SPCustomLayoutsPage -Identity "AccessDenied" -RelativePath "/_layouts/ExampleAccessDenied.aspx" -WebApplication "http://DEVWEBAPPLICATION")
    to change the new custom page.But it will be applied to all site collections in web application.
    Method Two: I have created custom masterpage and added following script. And referred this Custom masterpage in the custom access denied page.But it Never comes to this script.
    script type="text/javascript">  
      _spBodyOnLoadFunctionNames.push("redirectToCustomAccDenPage");  
      function redirectToCustomAccDenPage()  
       if( -1 != location.href.toLowerCase().indexOf('http://yoursitename/_layouts/accessDenied.aspx') )
       var url = 'https://' + window.location.host + '/mysite/customPages/customAccessDenied.aspx';
       window.location.replace(url);
       else
       alert(location.href);
     </script> 
    Method 3:
    I have Created custom HTTP module and implemented and it is working fine. But  the problem is it will be called for the all the requests in the web applicaton.
    COuld you let me know alternate apporach.
    Thanks
    Ravi P
    Ravi

  • How to create a new condition type for palets

    Hello Gurus,
    I want to create a new condition type to order material palets (like LP02) but I need to calculate a discount in % for entire palets only.
    By example:
    A discount of 5% for each completed palets.
    I order 1 palet for 100euros, I want a discount of 5 euros, and final price is 95euros.
    I order 1,5 palets for 150 euros, I want a discount of 5 euros and final price is 145 euros (100-5% + 50) and not 142,5euros (150-5%).
    I order 2 palets for 200 euros, I want a discount of 10 euros and final price is 190euros
    I tried with a fixed amount calculation type and it works fine, I have a discount only for entire palets. But when I tried with percentage calculation type, it doesn't work.
    Any Idea?
    Thank you for your help
    Gregory

    Hi,
    In the pricing procedure config, you will have to create a new formula under the AltCBV (Alternative formula for condition base value) column.  The base quantity should be
    Order Qty DIV 1
    That will give you the effect of truncating the decimals.   Suggest you get an ABAPer to have a look for you.
    Phyllis.

  • How to add custom Template transaction types ( for Quote ) ?

    How to add custom template in transaction types?
    Note : I have gone through below note. But not getting appropriate solution for this.
    982142.1 (OM Sales Order Template Not Available In Layout Template LOV For Print&Preview)
    444687.1 (OM Quote Template Not Available In Layout Template LOV for Print And Preview)
    Thanks in advance..
    Sameer

    Hi
    Thanks for your support,
    Pls let me know which steps i should go ?  my secanrio is  inbound side only,
    step 1 )   Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
    step 2) do i need to write some code in BADI also to update information for my custom infotype also  if yes then where and which BADI pls let me know  ? because already am working on one badi HRALE00INBOUND_IDOC for  few validation for incoming data.
    step 3 )  add  this new custom infotype in my standard ALE  filters.
    Pls let me know if am mistaking some where or if  i have to do some thing else ?
    Regards
    Meeta & Glory

  • How to create a Inbound delivery type for a special  purchase order type

    Hi,
    I try to create a special Inbound delivery type for a special purchase order type (a transfer purchase order).
    In SD module, I can créate a special outbound delivery and precise the sale order type, but I don't manage to do it for a Inbound delivery type.
    Do you know if i can do it without specifiq?
    Regards,
    Roselyne

    Hi Roselyne,
    What you experienced is standard system behavior. Inbound delivery type is uniquely assigned to confirmation control key. You can only specify confirmation control key on item level in PO. The assignment of Delivery type can be seen in the following table:
    T163D
    IBTYP EBTYP LFART  RETDLV
    1        AB                      X
    2        LA        EL           X
    3        GW       EG
    The field T163D-IBTYP is checked in different programms. For example in programm RM06ENAB (TA: ME92F). If you insist to customize the determination of delivery type by PO type, I strongly suggest you discuss with the Application consultants before making the modifications to ensure it won't impact other areas.

  • Version & Value Type for Reporting

    Hi Experts,
    In all Predefined Infocubes, Under Char. Infoobjects, the 2 charactestic infoobject 
    1. 0VERSION
    2. 0VTYPE
    are maintained, can any one explain why these fields are maintained nad for wht......
    Regards
    Ramakrishna K

    Hi,
    the 0VTYPE is meant to differentiate actual data (achieved sales for examples) from planing/budgeted/forecasted.. data.
    0VERSION is meant to differentiate versions of planing/budgeted/forecasted.. data.
    Obviously there will be only one version of your achieved result but you can have many versions of your plan data: last best estimated 1, last best estimated 2....
    this will enable you to create reports comparing achieved result against forecasted results (with restricted KeyFigs) and measure the performance of your business.
    hope this helps...
    Olivier.

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create custom adapter for Products and CommerceService

    Hi guys!
    First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
    Unfortunately it doesn't go in details enough...
    I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
    But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
    As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
    Also I guess I need to add MyProductAdapter somehow  so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
    Product product = productResource.adaptTo(Product.class);
    I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
    Cheers
    Kostya

    Hi Kostya,
        Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
    Thanks,
    Sham

  • How to create an user input variable for customer exit variable? - BW3.5

    Hi Guru,
    I have a requirement for the selection period of my reports. There are 3 possible reporting periods which should be user selectable:
    1. Month: Current reporting month
    2. Fiscal Year to Date
    3. Project Year to Date
    Here I need 2 variable to do these, 1 customer exit and 1 user input variable. I have created a variable customer exit to calculate all these requirement. But can any1 tell on how to create the user input variable for my customer exit? I need a user input variable with drop down list like below.
    01-Current month
    02- Fiscal Year to Date
    03-Project Year to Date
    I have create a new master data for this variable, but it's not working. What I need now is a standalone master data which do not need to link to any exiting records. Can any1 tell me how to create this?

    Just go to the definition of the variable for which you have created a customer exit. There you will find a check box for "Ready for Input". Just tick that checkbox and the variable will be available as a selection variable in the reports selection screen.
    Regards,
    Yogesh

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

Maybe you are looking for