How to create custom Templates in DVD-SP?
Hi, I was wondering how to create my own custom menus/menu templates in dvdsp. Whenever I import something for the menu, It will crop it automatically and will not allow me to re arrange it to show the full clip/image. Any info on creating custom templates would be very appreciated. Thank you, and although new to the apple forums, I am hoping to make my stay long while learning an abundance of information and hopefully helping others with any knowledge I may have.
These are good:
http://www.amazon.com/Designing-Menus-DVD-Studio-Expert/dp/B001D78GJG/ref=sr16?ie=UTF8&s=books&qid=1230073222&sr=8-6
http://www.amazon.com/Designing-DVD-Menus-Create-Professional-Looking/dp/1578202 590/ref=sr11?ie=UTF8&s=books&qid=1230073222&sr=8-1
Just remember...it will take weeks or months or even years to get proficient in designing good menus. This isn't something you just sit down and decide to do in a afternoon. DVDSP is only an authoring tool...its not for design work...and amendments need to be done in PS then reimported back into DVDSP>
Similar Messages
-
How to create custom template for webcenter portal application
Hi,
I created webcenter portal application in my jdev using the webcenter portal application template provided by the webcenter framework.
I tried to create custom template for my application by following steps:
1. Created new application using webcenter portal application template with all default package structure.
2. Right click pagetemplates folder under webcontent package and select new option.
3. New gallery opens up.
4. Selected JSF under webtier and JSF Page Template under items in the right hand side and clicked Ok button.
5. New wizard opens up for creating new JSF page template.
6. Gave template name(file name) and Page Template Name(template def name).
7. Selected checkbox staing start a Quick Start Layout and selected three column layout and selected Ok.
8. Selected checkbox for Create Associated ADFm Page Defination(so that page templates can be changes at run time).
9. Created some Facet Definations (header, footer, content1, content2, LHN, RHN).
10. Clicked Ok button which will create custom template.
11. Added some Panel Group Layout component from Component Palette.
12. Created new page (.jspx) with this template.
Now when I try to add producer portlets created using Producer Portlet application template and connected to the above application using WSRP2.0, I'm facing problem.
The prolem is that I'm not able to add more than one portlet in one single page?
Kindly let me know whether the steps followed by me is wrong some where and needs to corrected and let me know how I can add more than one portlet to page?
Basically I cant see more than one placeholders in my page to add portlets.Thanks Yannick.
In the step 9 I had mentioned that I created various facet definations (header, footer, content, content1 RHN and LHN).
Is this is not facet you are talking about or should I drop facet ref from the resource palette?
Can't I add moer than one portlet to my page at design time itself?
Annoying since in weblogic portal we do this at design time(.portal). -
I have Pages 09. I have created custom templates and want to delete them. How do I delete a template I have created in Pages 09?
Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.
-
How to create custom button by amending template in sc and change po screen
Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PMHi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create matrix template help pls
hi frs,
i have generated xml file after creating matrix report in report builder.
i want to know how to create matrix template(rtf) in word document.
if i use wizard or insert> all fields i am not getting rtf like matrix.
help pls
Thanks
RajeshThis issue is really becoming a problem for us. Does anyone have any examples of label templates. The label when generated automatically converts from pontrait to landscape. If you increase the size of the template then word complains about the page and margin size before printing.
Anyone have any ideas?
Thanks -
How to create custom content placeholder in sharepoint 2013
Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
JohnwebHi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to create custom adapter for Products and CommerceService
Hi guys!
First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
Unfortunately it doesn't go in details enough...
I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
Also I guess I need to add MyProductAdapter somehow so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
Product product = productResource.adaptTo(Product.class);
I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
Cheers
KostyaHi Kostya,
Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
Thanks,
Sham -
How Tou2026 Create Custom Application in E-Commerce 7.0?
Hi all,
We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
How Tou2026 Create Custom Application in E-Commerce 5.0
What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
Thanks in advance.
Regards,
AVHello Av,
Please see the Development and extension guide @
http://service.sap.com/crm-inst
=> Release 7.0
=> Operate
Regards
Mark -
How to create custom report in crm 2013
Hi,
I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
is an example of display recordHi Aamir,
Have a look at below link it shows step by step how to create custom SSRS report.
http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question. -
How to create custom report plugin using child region report metadata
Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
VSQLHANDLER APEX_PLUGIN_UTIL.T_SQL_HANDLER;
VCOLCOUNT NUMBER;
VCOLNAMES VARCHAR2(2000);
VAJAXIDENTIFIER VARCHAR2(100);
VPAGESIZE TYPEATTR := P_REGION.ATTRIBUTE_04;
VJSCODE VARCHAR2(32767);
BEGIN
VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
P_MIN_COLUMNS => 1,
P_MAX_COLUMNS => 999,
P_COMPONENT_NAME => P_REGION.ID);
VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
FOR I IN 1 .. VCOLCOUNT LOOP
VCOLNAMES := VCOLNAMES || '{name: "' ||
UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
END LOOP;
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
WHEN OTHERS THEN
APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala -
How to create rtf template to view report in Word and Excel, with numeric f
Hi,
Please help me!
How to create rtf template to view report in Word and Excel, with numeric formatted fields (like this 999 999 999,99 with spaces between numbers) and then end user be able to process those fields with Excel tools (sum, etc).
Thank you.From what I have seen Excel can not handle 999 999 999.00. You can use 999999999.00 and then format it as you want in the xls bt you can not have values like 999 999 999.00 coming from publisher output and have functions on the values in Excel
Tim -
How to create a Templates for Categories and Products In BCC
Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik -
How to create custom(or) user defined component in SAPTAO
Hi,
Please provide me some document or steps on how to create custom component in sap tao.
Thanks a lot in advance.
Regards,
SudhaHi,
If you want create any custom components, you should use SAP QTP to create it.
Here are the simple steps:
i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
iii) Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
Good luck.
Ram -
How to create a template for pages in a book
How to create a template in Pages to create camera ready pages for publishing a book?
Nothing is "camera ready" these days, it is all digital.
What is it you need to know, a book can take many forms.
Does it contain color photos, spot colors, purely black ink etc?
Peter
Maybe you are looking for
-
I own a NOMAD Jukebox Zen Xtra. I have been taking excellent care of it ever since I got it (about 8 months ago). However, there are several little pieces of dust or something that made their way underneath my screen lens. They are extremely annoying
-
AS2 Sender configuration - Authentication Certificate
Hello guys, We're implementing EDI with a partner with AS2. We have AS2 sender adapter configured. Everything works fine (we're able to receive data from partner and send back MDN) without signing. Now we're working on getting data signed. We have up
-
Has anyone had issues with the calendar dropping appointments?
Has anyone had issues with the calendar dropping appointments?
-
Report specs in HR or MM module
Hi, Can anyone plz provide me the business scenarios for which you created reports using each of these individually:( in HR or MM module) 1. BDC. 2. BAPI 3. BADI 4. LSMW Will greatly appreciate your help. Its URGENT !!!!! Thx in advance.
-
Performance issue on iPad4 with AIR SDK 3.9
Hi! I have an app that I've created with Flex SDK 4.6.0. The first time I've compiled the app with AIR SDK 3.1 and it runs with good performance on iPad4 (and little bit slow on oPad2). Then I've upgrated the AIR SDK to the version 3.9 and suddenly