How to create customer specific BEx3.5 workbook using BEx7.00??

Dear guys,
we are faced with the following situation:
Customer uses MS Office2003 and BI-AddOn7.x (Patch 3). We have to provide him workbooks but we use Office 2010 and BI-AddOn7.x (Patch 3). If we now provide the workbook our customer cannot open the workbook.
Trying to save the workbook locally as XLS-file works but to open it on customer side fails.
Although the general workbook setting "use XLS format" was activated there seems to be a check what Office-version was used to create the workbook.
Is there any trick?
Regards,
Peter

Hi Frederic
yes indeed I tried this option. But w/o any effect. We committed that creation of workbook would better be done in his own environment saving time.
Thanks for your help.
Regards,
Peter

Similar Messages

  • How to create customer specific fields within PC 10.0?

    Hello,
    for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
    Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
    Regards
    Andre Yuji

    Dear Johannes,
    We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
    as well as RE_RHGRENZ4 to  Set a new end date to the objects.
    At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
    Regards,
    Karina Atonaidan

  • How to create customer specific InfoTypes in CRM?

    Hi folks,
    we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
    Thanks!
    Martin

    Martin,
    Yes I think just using a BADI and storing in custom tables is the easiest approach in your case.  However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb.  You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
    If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
    Take care,
    Stephen

  • How to create custom structure in smart forms & use them in interface

    hi experts....
    can anyone tell me how to use  custom structure in
    form interface (parameters) without creating any structure
    in the dictionary.

    Hi Shrama,
    If you want to use the structure in interface. You have to create structure in dictionary.
    if you create in form or in report ..they won't recongnize the local structures.
    Thanks,
    Sunil

  • How to create Customer Group in CRM and use reminder script

    Dear Sir,
    I would like to set the group of customer in CRM , Such as , customer 1 is in Group A , Custoemr2 is in Group B.
    So, in Interaction Center : CIC0 , I will do the reminder scipte, there script for Customer Group A , anothere script for Customer Group B. How can I do that?
    Please kindly advise.
    Thanks and best regards,
    Vimol

    hi.
    define the variable using transaction code CIC2
    then assign that vaiable in text using transaction code CIC9
    then assign the text to reminder scipting using transaction code CIC1.
    If helpful reward me

  • PA - Creating customer specific infotypes

    Hello experts,
          How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
    Thanks and Regards,
    Shilpa

    Hi
    would you mind forwarding the documents to me as well
    my mail id is [email protected]
    Thanks in advance
    Regards,
    RK

  • Adobe Photoshop CS6 How to Create Custom Brushes

    In this tutorial you will learn how to create custom text brushes.you can use any character or word for making brush.
    https://www.youtube.com/watch?v=wi1nO2Ol3cI
    created by me..

    http://helpx.adobe.com/photoshop/using/creating-modifying-brushes.html
    Been around a while.

  • How to change customer specific status of employee?

    Hi All,
    I would like to change the Customer Specific Status of employee.
    In PA30/PA40, the customer specific status is in display mode.
    How to do it.. Any transaction code?
    Regards
    Pavan

    Hi Pavan,
    All three status indicators (customer defined, employment, special payment) can only be assigned at the time the action is created (cannot be changed thereafter).
    Do the creation through :
    SPRO : Personnel Management -> Personnel Administration -> Customizing Procedures -> Actions -> Create Customer-specific status.
    Regards,
    Dilek

  • How to create customer material information(vd51) and what is it's use

    how to create customer material information(vd51) and what is it's use.
       does it will work even in mm module also??
      my requirement is such that...
    my sap code is 235
    where as customer will give purchaase order on code 536.when i am entering this 536 code  in my system,automatically sytem should propse my sap code of 235.subsequently my inventory should reduce.

    Hi,
    the transaction for maintaining the customer material inforecord is VD51.Data on a material defined for one specific customer is stored in the customer material information records.
    Features:
    During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
    If you maintain the plant in the customer material info record, the system will give priority for the plant maintained in the CMIR in the order.
    Prase

  • How to get customer-specific objects into PCUI ?

    Hello,
    we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
    Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
    Thanks in advance
    Martin

    Option 1:
    If you are good in ABAP.
    You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
    Option 2:
    If you are good at java
    Develop an FM to update the table.
    Call the FM from webdynpro
    Include this webdynpro as HTML viewer in PCUI.
    Regards,
    Abdul Raheem S

  • How to create a user in UME Database using web dynpro java custom application

    Hi,
    Can you please suggest me how to create a user in UME Database using web dynpro java custom application.
    My Requirement is user can register his/her user id in SAP Portal 7.3 UME database.
    Please suggest me.
    Thanks and Regards,
    Amit

    Hi Amit,
    Generated Documentation (Untitled)
    This is what you're looking for, there's no real cook-book -- though Amey mentioned there might be some material on SDN, perhaps some tutorials.
    You should be looking into com.sap.security.api.IUserFactory, methods newUser(String) which gives you and IUserMaint and commitUser(IUserMaint, IUserAccount) -- IUserAccount can be obtained using com.sap.security.api.IUserAccountFactory, method newUserAccount(String)
    Hope it helps,
    D.

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create custom content placeholder in sharepoint 2013

    Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
    Thanks,
    Johnweb

    Hi,
    If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder 
    <asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
    <asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
    I suggest you provide your basic requirement for further research.
    If you want to customize a master page, the Rajendra's method would be helpful.
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to create custom adapter for Products and CommerceService

    Hi guys!
    First of all I wanted to say that I did search. Only relevant material I found was this http://dev.day.com/docs/en/cq/5-5/ecommerce/eCommerce-framework.html
    Unfortunately it doesn't go in details enough...
    I'm trying to follow geometrixx-outdoors example to create my shoppingCart. I have a list of of products in /etc/commerce/products.... referenced by productPage in content.
    But I don't know how to create custom CommerceProvider and Adapter to create proper Product objects - it always picks up geoProductImpl.
    As I understand I need to specify cq:commerceProvider to myProvider and then I need to somehow register MyProvider so it gets picked up.
    Also I guess I need to add MyProductAdapter somehow  so when shoppingCart executes following it returns my implementation instead of geoProductImpl.
    Product product = productResource.adaptTo(Product.class);
    I'd really appreciate if anyone could share an example or point me in the right direction for a guide.
    Cheers
    Kostya

    Hi Kostya,
        Look at this presentation recorded at http://dev.day.com/ddc/en/gems/commerce-framework.html
    Thanks,
    Sham

  • How Tou2026 Create Custom Application in E-Commerce 7.0?

    Hi all,
    We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
    How Tou2026 Create Custom Application in E-Commerce 5.0
    What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
    If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
    Thanks in advance.
    Regards,
    AV

    Hello Av,
    Please see the Development and extension guide @
    http://service.sap.com/crm-inst
    => Release 7.0
    => Operate
    Regards
    Mark

Maybe you are looking for

  • The application was unable to start correctly (0xc0000142). Click OK to close the application. error: 0x6740090A-0x20003

    Hello, I have installed the app-v 5 client on a 2012 rd server. After publishing the application I'm getting the error "The application was unable to start correctly (0xc0000142). Click OK to close the application." The registry value NtfsDisable8dot

  • Problem starting ES Builder in PI 7.10

    Just installed PI 7.1 in a sandbox environment with Windows Server 2003 SP2 and MAXDB.  I have also followed the post-installation steps in the installation guide.  So far everything works except the Enterprise Service Builder.  When I clicked on the

  • Blank Records showing at Infoprovider level..how to eliminate@ Report level

    Hello Experts, I am facing an issue. For a particular matierial in the Bex Report 2 KF values must be equl. this is the complete scenario: Matirial Total Target Actual Val BIO Actual Val 81271071 9550,52 4,793,67 In the above scenario Total Target Ac

  • Undeployment hangs. JMS issue??

    Hi All, I'm facing an issue that undeployment through WLST hangs. The application module is removed from the console, But still it is not coming out of WLST. I could see that the thread is waiting on the task to complete, but it never comes out. Belo

  • SRM Integration with HR data

    Hello SDN community, Our company is struggling right now, because we are not coming up with very good options for an SRM implementation. I have tried to read some of the posts regarding SRM and OM integration, but I have zero experience with SRM.  I