How to create customer specific InfoTypes in CRM?

Hi folks,
we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
Thanks!
Martin

Martin,
Yes I think just using a BADI and storing in custom tables is the easiest approach in your case.  However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb.  You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
Take care,
Stephen

Similar Messages

  • PA - Creating customer specific infotypes

    Hello experts,
          How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
    Thanks and Regards,
    Shilpa

    Hi
    would you mind forwarding the documents to me as well
    my mail id is [email protected]
    Thanks in advance
    Regards,
    RK

  • How to create customer specific fields within PC 10.0?

    Hello,
    for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
    Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
    Regards
    Andre Yuji

    Dear Johannes,
    We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
    as well as RE_RHGRENZ4 to  Set a new end date to the objects.
    At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
    Regards,
    Karina Atonaidan

  • How to create customer specific BEx3.5 workbook using BEx7.00??

    Dear guys,
    we are faced with the following situation:
    Customer uses MS Office2003 and BI-AddOn7.x (Patch 3). We have to provide him workbooks but we use Office 2010 and BI-AddOn7.x (Patch 3). If we now provide the workbook our customer cannot open the workbook.
    Trying to save the workbook locally as XLS-file works but to open it on customer side fails.
    Although the general workbook setting "use XLS format" was activated there seems to be a check what Office-version was used to create the workbook.
    Is there any trick?
    Regards,
    Peter

    Hi Frederic
    yes indeed I tried this option. But w/o any effect. We committed that creation of workbook would better be done in his own environment saving time.
    Thanks for your help.
    Regards,
    Peter

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create custom report in crm 2013

    Hi,
    I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
    is an example of display record

    Hi Aamir,
    Have a look at below link it shows step by step how to create custom SSRS report.
    http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
    It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
    Thanks,
    Prasad
    Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

  • How we create custom infotype and how to configure with its subtypes.

    hai abap-hr gurus,
    how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
    plz help me for this with an example code.
    thanks..
    kiran kumar

    Hi Kiran,
        Please fallow the below steps to create the custom infotype. If you have any quires let me know.
    For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
    then select the `Employee Infotype' radio button
    after that select the `PS Structure Infotype'
    then click on Create… A separate table maintenance window appears
    then Create a PS structure with all the fields you want on the infotype
    Save and Activate the PS structure
    now Go back to the initial screen of PM01
    Click on `All' push button. It takes a few moments
    Click on `Technical Characteristics’. Infotype list screen appears
    Click on `Change'(pencil) button
    Now select your Infotype and click on `Detail' (magnifying glass) button
    Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
    Give your subtype field as subtype field & Save and come back to PM01 initial screen
    Click on `Infotype Characteristics' … Infotype list screen appears
    Click on `Change' (pencil) button & on New Entries
    and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
    to fill yours). Now save ur entries
    Now the Infotype is created and ready to use.
    If you want to change the layout of the Infotype as per your
    requirement…
    In the PM01 initial screen…Select `Screen' radio button and give
    2000 as the screen name, then click on edit.
    In the next screen.. Select `Layout Editor' and click `Change'.
    Screen default layout appears…here you can design/modify the
    screen..change the attributes of the fields..etc.
    Save and activate. (Don't forget to `Activate at every level)
    Regards,
    Ramakrishna kotha.

  • How Tou2026 Create Custom Application in E-Commerce 7.0?

    Hi all,
    We want to set up SAP E-Commerce for ERP 7.0. For SAP E-Commerce for ERP 5.0 the following configuration guide is available:
    How Tou2026 Create Custom Application in E-Commerce 5.0
    What about SAP E-Commerce for ERP 7.0? Is this guideline also valid for 7.0?
    If not, where can I find the corresponding configuration guideline for SAP E-Commerce for ERP 7.0 (on the SAP Service Marketplace?)?
    Thanks in advance.
    Regards,
    AV

    Hello Av,
    Please see the Development and extension guide @
    http://service.sap.com/crm-inst
    => Release 7.0
    => Operate
    Regards
    Mark

  • Is it possible to create custom partylist field in crm 2013

    Hi,
    I want to create custom partylist field in crm 2013. Please tell me how to create?

    Hello,
    That's not possible. The only way is from/to/cc e.t.c. attributes in custom activities.
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • Regarding Customer Specific Infotype

    Hi Gurus,
    I had created one ad-hoc query. When i run this query in SQ01. I selected one filed in customer specific infotype. then it shows that data is tooo long.
    Can any body give the sollutions for this???
    Regs,
    Brahma

    Hi
    Debugging is best option.
    Manoj Shakya

  • Change Pointers activation for customer specific Infotype

    dear friends,
    could you please let me know how to activate the change pointers for customer specific infotypes? Currently we are using message type HRMD_ABA.
    regards,
    jp

    Anand:
    Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
    Hope this help
    Ezequiel

  • How to change customer specific status of employee?

    Hi All,
    I would like to change the Customer Specific Status of employee.
    In PA30/PA40, the customer specific status is in display mode.
    How to do it.. Any transaction code?
    Regards
    Pavan

    Hi Pavan,
    All three status indicators (customer defined, employment, special payment) can only be assigned at the time the action is created (cannot be changed thereafter).
    Do the creation through :
    SPRO : Personnel Management -> Personnel Administration -> Customizing Procedures -> Actions -> Create Customer-specific status.
    Regards,
    Dilek

  • How to create customer material information(vd51) and what is it's use

    how to create customer material information(vd51) and what is it's use.
       does it will work even in mm module also??
      my requirement is such that...
    my sap code is 235
    where as customer will give purchaase order on code 536.when i am entering this 536 code  in my system,automatically sytem should propse my sap code of 235.subsequently my inventory should reduce.

    Hi,
    the transaction for maintaining the customer material inforecord is VD51.Data on a material defined for one specific customer is stored in the customer material information records.
    Features:
    During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
    If you maintain the plant in the customer material info record, the system will give priority for the plant maintained in the CMIR in the order.
    Prase

  • How to get customer-specific objects into PCUI ?

    Hello,
    we want to get an Z-table as tab page of the business partner-application into PCUI. It should 'only' be possible to create new entries - today there is no need to modify or delete records.
    Does there exist something like a "cookbook" on this task or has anyone of you experience how to get customer-specific objects (without using EEWB) into PCUI ?
    Thanks in advance
    Martin

    Option 1:
    If you are good in ABAP.
    You can add new tab in which create a new Field group. Assign it to a model access clas in which handle the table update.You can get the details in PCUI cookbook itsel.
    Option 2:
    If you are good at java
    Develop an FM to update the table.
    Call the FM from webdynpro
    Include this webdynpro as HTML viewer in PCUI.
    Regards,
    Abdul Raheem S

  • How to create custom content placeholder in sharepoint 2013

    Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
    Thanks,
    Johnweb

    Hi,
    If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder 
    <asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
    <asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
    I suggest you provide your basic requirement for further research.
    If you want to customize a master page, the Rajendra's method would be helpful.
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for