How to create Data account on iPad2 WiFI+CDMA in India
I bought a new iPad2 32 GB(CDMA+WiFi) from US. I registered it with apple and my device is up and running.
And I see that it selects the carrier (vodafone) and the same is listed in the settings and on top left corner of the iPad. But when i try to browse,i get a dailog box, "Could not activate cellular data network, you are not subscribed to a cellular data services", when i try to create data account, it asks me about firstname, lastname and telepone number. How to get telephone number? How to create a data account for cdma iPad2 in India, i don't want use international roaming on it.
My WiFi connection is ON and its working fine.
Let me know, how to activate internet on my device using cellular data in India.
Thanks in advance.
Regards,
-Prem
You can't unless there is a provider that uses CDMA netwok at the same frequencies as Verizon in India. There is no GSM sim slot on the CDMA iPad 2. The newer iPads all have a GSM sim slot for use worldwide.
Similar Messages
-
How to create reconciliation account
hi gurus,
when iam trying to create a customer,system is asking reconciliation account.But,in the selection list,there are no entries found for reconciliation account..can u please tell me how to create reconciliation account,step by step..this is very urgent...
Thanks in advance...
Regards..
Yogi..Hii
system is giving this error as customer and vendor accounts are needed to update the GL account and the accounts are kind of subledger account,...
so u need to create the sundry debtors or creditors account in FS00. here under description tab u need to select balance sheet account and under control tab select reconciliation account type as customer or vendor... whatever applicable..
now give the same GL account number in customer or vendor master data in reconcilliation account number.
so that through this recon. account is a GL account to which subsidiary ledgers (customer and vendor) are connected and updated..
hope u got ur answer
reward points
sejal -
How to create a account key for application type M ?
Hi Guys,
How to create a account key for application type M ? and link the same with
Gl account.
thanks.Hi
Please create the account keys or transaction keys in
SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
Thanks & Regards
Kishore -
I have a windows PC. When I enter my apple id and password to the icloud, it shows "Apple id is correct but it's not an iCloud account" So how I create iCloud account or how can I fix it?
To enable iCloud on your Windows PC,
first set up iCloud on your other (Apple) devices,
then install the iCloud Control Panel for Windows...
From Here > http://www.apple.com/icloud/setup/pc.html -
How to create an account w/o having to specify object owner_names
Hi,
Do you know how to create an account, that, when logged in wouldn't need to use the following syntax when referring to objects: select * from <owner_name>.<object_name>.
When the owner of the account creates an object, then obviously, it's not necessary to specify the owner_name (syntax: select * from <object_name>;), but, I'd like an account with ie: (username: joey) to not have to specify the owner_name for all the objects owned by another owner (ie: bob).
Is this possible?
Thanks.
ToddThis is one use for SYNONYMs. You can create a private synonym for JOEY:
create synonym joey.table_a for bob.table_a; or a public synonym:
create public synonym table_a for bob.table_a;public synonyms mean everybody can seen the table without prefixing it with the owner; but PUBLIC synonyms, like PUBLIC grants, make fine-grained security access harder to achieve.
In the first case the account creating the synonym must have rights on BOB's tables and (unless the account creating the synonym is JOEY) the CREATE ANY SYNONYM privilege. In the second case they must have rights on Bob's tables and CREATE PUBLIC SYNONYM privilege.
In both cases the account must either be BOB or have been granted access to BOB's tables: if the creating account is not JOEY they must have been granted the privileges WITH ADMIN option: it's no good having a synonym on BOB's table_a if you don't have the privilege to select from it. This is important because it is possible to create a synonym for an object you don't have rights on or indeed that doesn't exist.
I hope that's clear.
rgds, APC
null -
How to create an account without a credit card
Does anyone know how to create an account without using a credit card?
Yes. Follow the instructions in this Apple support document.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
B-rock -
How to create data stores in ODI ?
Hi all,
I am new to this ODI part.Can anyone please help me as how to create data stores in ODI.
A prompt reply will be highly aprreciated.
Thanks
Saurabh.What do you mean by "create datastores"?
If you mean you want to reverse engineer existing tables from a database, then the phrase used in the ODI docs is "reverse enginnering". If you mean to create new tables in a database, then:
1) ODI is not meant to be a database design tool.
2) Using the "diagrams" node under a data model, you are able to use the "Common Format Designer" (CFD) tool to design and create the structure. The CFD tool is a simple ER-digram tool, but importantantly, if you drag structures in from one model to another, it remembers where it came from, allowing automatic generation of interfaces, and it automatically translates the data types. -
Oracle Lite: How to create data subsetting parameters?
I need to know:
how to create data subsetting parameters?
I need these parameters for use of a restricting predicate in an item publication.
I were looking the forum and i found topics about "how to set?" but i don't found how to create a data subsetting parameter.
I am replacing SQL server 2000 and SQL server CE by oracle 9i and oracle lite 5.0.2.
Thanks in advance.
PCIDHad problems with the parameters shown on pages webtogo in the datasubsettings section because none of them were "defined", but in sections 1.4.1.2 I found these lines:
Template: select * from master.task where CustCity = :city
Then click OK. This brings you back to the previous screen. The template query contains a variable (subscription parameter) named "city". Later, when you provision the application to a user, you will be prompted to enter the value for it.
I found out how to put a parameter to restrict registries that download to the pocket pc from each user.
Thank you very much!!! -
How to create data transfer and copying requirements
Hi Gurus,
Can you tell me how to create data transfer and copying requirements in copying control for SD?
Thanks,
pAULHi John,
Go to Transaction code - VOFM.
In the menu select Data Transfer and select where you want maintain the copying requirements i.e. at the order level, delivery level etc.
Here, you can either create a new routine or change the existing routine according to your requirement.
Make sure you activate the routine (click on Edit - Activate from menu) once you are done with the routine.
REWARD POINTS IF HELPFUL
Regards
Sai -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
I have a 13" MacPro. How can I create a Face Time account. I have an Apple ID and password. When I Google how to create an account all I get is what I need for the system
You don't need to create an account. Your use your Apple ID to log into Facetime.
If you haven't already you will need to download the Facetime App from the Mac App Store.
https://itunes.apple.com/us/app/facetime/id414307850?mt=12&ls=1
FaceTime for Mac: Troubleshooting FaceTime - Apple Support -
HOW TO CREATE DATA SOURCE FOR MAXDB
hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
GuruThe following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm -
HT2534 How to creat an account without giving your bank details
How to creat an account without giving your bank details
Breahross wrote:
How do I create an at the app world without my bank details
I'm not sure what that means -
how to reduce data usage on ipad wifi only version. consuming **** lot of data even on simple surfing of sites
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Maybe you are looking for
-
Error while saving report after creating it using webi java panel?
Hi, Whenever i create report through java panel & RE SDK and then try to save it i got below error Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectEx
-
I've received an error messagae that says my message can't be sent. Unfortunately, the recipient list is so long I can't see the bottom of the error message to click "Try again" or another option. The message won't scroll. How can I get to the bot
-
Use 2008 iMac as display for dvi vga pc
I Am building a pc and I would like to use my early 2008 imac as a display for a DVI and VGA output motherboard. I have read MILLIONS of questions on Target Mode and know as well as my name that iMacs older than 2011 cannot be used with Target displ
-
Invoicing in SRM 5.0 - Mismatch between categories
Hi SRM-folks, Im trying to enter a Service invoice with 3 positions in SRM 5.0 At checking the invoice before saving it, for the last two positions I get the error message: "Product category in purchase order and invoice do not match " I Checked the
-
Fuji Xerox DocuPrint CP205w software unavailable
I have a Fuji Xerox DocuPrint CP205 wireless printer, it shows up in the print & scan box and when I select it to install it says there is software available but after trying to retrieve it, I get a message saying software is currently unavailable. I