How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

Similar Messages

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

How to creat Data source from Multiple Tables in   SAP BI ?

Hi Experts,
1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
2. For Inventory tables are           :           MSEG MKPF.
3. For Invoices MIS   tables are -          RBKP & RSEG.
4. For Taxation MIS tables are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
5. For Master data tables are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
How to creat   individual Datasource for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices, 4. Taxation , 5. Mater data. ?

Hi,
Go for the generic data sources.
1. first create the view on all the tables.
        You can only use join conditions but not Union.
        you can specify one table as primary table based on your requirement.
2. build the data source based on the view.
Regards,
Siva
Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

How to create data source for MySql

I m new to Creator. I m trying to connect it with MySql4.1. but the connection is not succeeding. I m using Java Connector to MySQL with jdbc 3 support. user name root.
Wht will be the connect url.
as my database name is cdap.

Hi,
Below are the steps to create mysql datasource
1.Right clcik on the 'data sources' in the Server Navigator and choose 'Add Datasource"
2.Click on the dropdown and choose <Add server type>. opens a 'Edit database Server types"
3.Click on New and choose the mysql driver(ie .jar file) .Then click on suggest to get the driver class name. click on close
4. You come back to 'Add Datasource' window.
5. Provide the username, password and the
url=jdbc:mysql://localhost/your database name, click Add
MJ

How to create data source on hierarchies customer defined

Hi sdn
how to create datasource on customer defined hierarchies
Rubane

Hi
This guide shows how to upload hierarchies.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how%20to%20download%20a%20hierarchy%20to%20a%20flat%20file.pdf
http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Uploading from hierarchy from R/3
http://help.sap.com/saphelp_bw30b/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Check the threads,
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
Re: Hierarchies
There is a good article on hierarchy on BWExpert online. Check that out
http://www.bwexpertonline.com/go/sample/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad0a4b07-0301-0010-5095-ef7615676fc0
Also check the thread
Creating Hierachies
Please reward for the same.

Create Data Source for hierarchy

Hi all,
Can any one tell me how to create Data Source for hierarchy for the object (for example 0MATL_GROUP)?
Kindly Help,
Thanks
Laura Gómez

Hi Laura
with BI7 this feature is not yet supported. Try with 3x datasource

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

Newbie Question: Creating Data Sources

Our current Hyperion setup consists of the Hyperion 9.3 client that users access via a terminal server. We are trying to get the web version of Hyperion running.
I installed some base components of the Oracle Enterprise Performance Management System (11.1.1.2.0.940). It all starts fine and I can login with admin, but I do not see how to create data sources or load .bqy query files. If I create a new interactive reporting document, it makes me choose a Data Source from the virtual directory in which I do not have one. if I try to import one, or import a .bqy file, I browse to the file, select it, then always get a "File path is wrong." error. I also found how to create Data Sources using the CMC, but I do not see how to reference these. What am I doing wrong?.

HI,
What version of Hyperion planning are you using version 9.3 or epm11.1?
Because they have different ways of creating datasources.
In version 9.3 you can create datsource in the configuration utility.
While in version 11 you need to create planning application first before creating datasource either by classince planning application or epm.
Thanks,
Hanson

How to create hierarchy datasource in BI7.0

I want to create hierarchy datasource in BI7.0(Patch level:15), and my source systems is Oracle DB. Who can tell me how to do?
Thanks.
Edited by: Ricken Fan on Mar 5, 2008 9:44 AM

Hi,
SAP is not Supporting to create Hierarchy Data Sources in BI7.0
You have to create Hierarchy Data Sources in 3.x only.
Reg
Pra

How to define data-sources-alias.xml to use Oracle data source

Hi,
I created Oracle jdbc Data Source named "MYDS" in Visual Admin. I added the alias = MYDS_ALIAS. I set the Initial Connection to 2. On the Monitor tab, I see a green line running across the screen. The datasource MYDS is connected to the Oracle.
Now, I would like to define "data-sources-alias.xml" to use MYDS.
When creating data-source-aliases.xml it creates the alias by default on ${com.sap.datasource.default} which is the default DB.
I followed the link --> How to point data-source-aliases.xml to another Datasource
and my data-sources-alias.xml is now:
<data-source-aliases>
 <aliases>
 <data-source-name>$</data-source-name>
 <alias>BRANCH50DS</alias>
 </aliases>
</data-source-aliases>
The "EAR generatation has finished successfully", but when "Deploy to J2EE Engine", I got the error below:
1) How to define data-sources-alias.xml to use Oracle data source?
2) I found the link (SDA Deployment error) talking about "sda-dd.xml". How to create "sda-dd.xml" and make it use substitution variables "MYDS"
Dec 20, 2005 3:53:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[003]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7181 - 630_SP]/>
<!NAME[C:\usr\sap\J2E\JC00\SDM\program\log\sdmcl20051220205339.log]/>
<!PATTERN[sdmcl20051220205339.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Dec 20, 2005 3:53:39 PM Info: -
Starting deployment -
Dec 20, 2005 3:53:39 PM Info: Loading selected archives...
Dec 20, 2005 3:53:39 PM Info: Loading archive 'C:\usr\sap\J2E\JC00\SDM\program\temp\temp856850022Ear.ear'
Dec 20, 2005 3:53:40 PM Info: Selected archives successfully loaded.
Dec 20, 2005 3:53:40 PM Info: Actions per selected component:
Dec 20, 2005 3:53:40 PM Info: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: Saved current Engine state.
Dec 20, 2005 3:53:40 PM Info: Error handling strategy: OnErrorStop
Dec 20, 2005 3:53:40 PM Info: Update strategy: UpdateAllVersions
Dec 20, 2005 3:53:40 PM Info: Starting: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\sap.com\50022Ear\localhost\2005.12.20.15.53.28\temp856850022Ear.ear
Dec 20, 2005 3:53:40 PM Info: Software type of SDA: J2EE
Dec 20, 2005 3:53:40 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Info: Begin of log messages of the target system:
05/12/20 15:53:40 - ***********************************************************
05/12/20 15:53:41 - Start updating EAR file...
05/12/20 15:53:41 - start-up mode is lazy
05/12/20 15:53:41 - com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
 at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3727)
 at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3695)
 at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:523)
 at com.sap.engine.deploy.manager.DeployManagerImpl.update(DeployManagerImpl.java:512)
 at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:196)
 at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
 at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
 at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
 at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
 at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:46)
 at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
 at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
 at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
 at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
 at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
 at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:127)
 at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:96)
 at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:67)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
 at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
 at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:81)
 at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
 at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
 at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:280)
 at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
 at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
 at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
 at java.lang.Thread.run(Thread.java:534)
05/12/20 15:53:41 - ***********************************************************
Dec 20, 2005 3:53:41 PM Info: End of log messages of the target system.
Dec 20, 2005 3:53:41 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Error: Aborted: development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Dec 20, 2005 3:53:41 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 20, 2005 3:53:41 PM Error: -
At least one of the Deployments failed -

Hi,
If you remove the $ and braces (as shown below) it will work.
<data-source-aliases>
<aliases>
<data-source-name>MYDS</data-source-name>
<alias>BRANCH50DS</alias>
</aliases>
</data-source-aliases>
Regards,
S.Divakar

How to change data source of Universe

Hi,
I have two databases called A_Database and B_Database
Same tables and data are in both the databases.
I created universe U_universe using A_Database. It is working fine
Now I would like to change from A_Database to B_Database in U_universe without affecting any thing in U_universe because tables and data are same.
Please let me know following doubts.
1.How to do above things?
2.if A_Database and B_Database are in different server, how to overwrite data source in the universe
3.if A_Database and B_Database are in the same server, how to overwrite data source in the universe
Thanks and Regards,
Manjunath

In Designer, import your universe, click on File>Paramers or click on parameters icon on the tool bar and change connection used by the universe from one pointing to Universe A to one pointed to universe B.
Also, visit this site : http://help.sap.com/content/bobj/bobj/index.htm
Look for Universe Designer guide.

Error In creating data sources

Hi,
I am creating Data source in RSDS transaction that time I am getting following error
"No fields were supplied"
how to resolve this?
Regards,
Akshay

Hi,
First check whther the fields are there in DataSource for transaction data
DataSource for master data
DataSource for attributes
DataSource for texts
DataSource for hierarchies
If the fields are there in datasource Deactivate AND Activate datasource once again
Regards,
Marasa.

Create data source in BI 7.0?

hi,
while creating data source in BI 7.0 , ( from flat file data)
under extraction tab:
character set settings : default and direct entry is there
if i select direct entry i am getting character set and replacement character.
what scenerio we use direct entry and what scenerio we use default. if i select direct entry what is effect for my output.
please clarify.
regards
ss

System Default or Fixed Entry
If you choose Default Setting for the character set, in Unicode systems a file in UTF-8 format is expected, in non-Unicode systems a file in the format of the system code page is expected.
If you choose Direct Input for the character set, you can select an SAP character set and determine a replacement character, in case errors occur while converting to the system character set.
SAP Character Set ID
The 4-character name of an SAP character set as defined in SAP character set maintenance.
The following explains the naming convention in more detail:
First digit: Code
0 EBCDIC character sets
1 ASCII character sets
2 mixed single byte / double byte character sets
4 double-byte character sets
6 mixed character sets
8 double byte and multibyte character sets
9 reserved for code pages you define
Second digit: Country
1-3 countries that use the Latin alphabet (Western Europe, North and South America, Australia, Africa)
4-6 countries that use non-Latin alphabets and writing systems (Eastern Europe, Asia, Arabic countries in Africa)
7-9 reserved for special languages
Third and fourth digits: Sequential number
Example
0100 IBM 00697/00273 (Latin 1 - Germany/Austria)
0401 SNI BS2000 8859-5 EHCLC (cyrillic - multiple languages)

How to create Data source in BI7( r/3 extraction)

Similar Messages

Maybe you are looking for