How to create database in 10g xe

How to create database in 10g xe? could you please direct me to which documentation in 10g xe website? is it possible to create the db from the web console? if so, how? I can't seem to find a way to do it? Thanks

You cannot: there can only be one XE database per host and it's created when you install Oracle XE.

Similar Messages

  • How to create database with ASM

    HI
    How to create database with ASM?
    I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
    I install oracle DB software only. Also make 3 disk for ASM .
    1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
    How I can see disks ..
    so I simple install oracle DB software only.
    2 -- Now I want to create database with ASM by DBCA .
    What process I will follow ?
    Please guide me
    Thanks

    Hi
    Steps to create database with ASM.
    1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
    2.Create disk without file ssytem.
    3.Assign disk to raw .
    4.Change owner and permission to raw devices.
    5.Configure ASM manually or USing DBCA.
    Manually ASM Configuration.
    a.Create initialization parameter file and password file.
    b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
    c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
    Using DBCA to configure ASM.
    1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
    2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
    ASM disk also can be conbfigured with ASMLIB .
    If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
    Hope this will help U,
    Tinku

  • How to create Database, table , and apply triiger on oracle10g lite ?

    Hello All,
    I want to use oracle 10g lite , i just download oracle 10g lite from oracle site and just install on my system, i have no any knowledge how to create database, how to create tables and how to apply triggers on tables. I want to access this database using JDBC.
    plzzzzzzzzzzzzzzzzzz help me...............
    Thanks in advance
    Pankaj

    are you trying to use oracle lite just as a database? it is normally used as part of a data synchronisation from a server, replicating snapshots to create the database and tables on the client.
    PL/SQL format triggers are not supported in the oracle lite client. Java stored procedures are, but you would need to build the table interactions

  • How to create database in timesten?

    Please let me know how to create database in timesten as we create in Oracle 10g named orcl
    Please guide in detail
    Thanks.

    Hi!
    You can use TimesTen in standalone mode instead of Cache connect to Oracle.
    If you have deployed TimesTen on Linux then you should make DSN in sys.odbc.ini which is located in info folder of TimesTen. If you are using Windows then you can use ODBC utility in control panel.
    You can see the documentation of TimesTen for more detailed information.
    /Ahmad

  • How to create database from .sql file

    how to create database from .sql file..?? i put the sintax query in a sql file.. and i want to call it in java code..
    ho to do it..??

    why do you want to do this from java?
    i just don't see the point.
    find your dba and have him/her run it for you

  • How to create database item for fast formula?

    Hi,
    Is there any document for how to create database item for fast formula? I could not find in Metalink or this forum. Thanks.
    Andy

    Oracle ship many pre-delivered Database Items plus they're created automatically when you create Input Values (etc).
    There's often something already there for you. If there's not, you usually create Fast Formula functions to retrieve other data. You don't create your own custom DBIs; Oracle don't deliver APIs for that.

  • How to create database link from oracle to sql server

    Please help with how to create database link from oracle to sql server
    Best regards,
    Vishal

    Please help with how to create database link from oracle to sql server
    Best regards,
    Vishal
    Hi Vishal,
    I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
    https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
    We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
    Regards,
    Elvis Long
    TechNet Community Support

  • How to create database using shell script

    hai
    how to create database using shell script

    The documentation details the steps to create a database manually. Another option is to use DBCA to create the scripts. DBCA will give you a complete set of scripts that will create a database.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref220

  • How to create database dynamically

    Hi,
    Some one suggest, how to create database dynamically in oracle 8.1.6.0.0 standard edition with an example.
    Thanks in advance,

    Hello,
    I'd ask in the
    Windows Presentation Foundation (WPF) forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to create database link between oracle9i database and oracle10g

    How to create database link between oracle9i database and oracle10g
    oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
    oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
    Please help me on this

    For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
    Connections between 10.2 and 9.0.1 was never been supported.
    Cheers !!!!
    Bhupinder

  • How to create database and table with GUI?

    How to create database and table with GUI?
    for linux can do that?
    or have only way to create table by use sql*plus.
    everyone please help me.
    thanks

    go to www.orasoft.org
    here is a gui tool.
    null

  • If ur database crash u have only export of database how u create database f

    if ur database crash u have only export of database how u create database from starting with help of export give steps

    What is an "export give steps?"
    If ur's database crashes, how is it u's responsibility to restore it?
    Now, if my database crashes, I just restart it in crash recovery mode and not even worry about the backup or export. It is not needed.

  • How to Extract CREATE DATABASE for 10g?

    I've seen utilities that will re-create the full 'CREATE DATABASE' syntax for a 8i or 9i database. I'd like to do the same thing for 10g that understands the features of 10g like SYSAUX and other new features. I looked at DBMS_METADATA but it doesn't really cover the CREATE DATABASE syntax.
    Has any seen a routine to extract CREATE DATABASE syntax for a 10g database?
    -Crispin

    Hi,
    have you tried by using dbca?
    Create a new template from existing db..
    Acr

  • How to create database link between oracle and SQL Server

    Hello Everyone,
    Here i have Oracle Database 9i and SQL Server 2005 databases.
    I have some tables in sql server db and i want to access from Oracle.
    How to create a database link between these two servers
    Thanks,

    Thanks for Everyone,
    I was struggle with this almost 10 days....
    I created Database link from Oracle to SQL Server
    Now it is fine.........
    Here i am giving my servers configuration and proceedure how i created the db link...@
    Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
    Machine (1)
    DB Version : Oracle 9.2.0.7.0
    Operating System : HP-UX Itanuim 64 11.23
    IP : 192.168.0.31
    Host : abcdbt
    Machine (2)
    Version : SQL Server 2005
    Operating System : Windows server 2003 x86
    IP : 192.168.0.175
    Host : SQLDEV1
    User/PW : sa/abc@123! (Connect to database)
    Database : SQLTEST (exsisting)
    Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
    Prerequisites in Machine (2):
    a)     Oracle 10g software
    b)     User account to access SQL Server database (sa/abc@123!)
    c)     Existing SQL Server Database (SQLTEST)
    d) Tables (testing purpose) (T)
    Steps:
    1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
    2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
    Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
    You can follow this link also.....
    http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
    I created DSN as
    DSN name : SQLTEST
    User : SA/abc@123! (Existing user account)
    Host : 192.168.0.175 (machine 2)
    Already I have 1 database in SQL Server with the name SQLTEST
    You can create DSN with different name also (not same as db name also)
    3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
    Create init<DSN NAME> file
    Ex: initSQLTEST
    Copy inithsodbc to initSQLTEST
    And edit
    initSQLTEST file
    HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
    HS_FDS_TRACE_LEVEL = OFF*
    save the file....@
    4)     Configure Listener.ora *(Machine 2)*
    LISTENER_NEW =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    SID_LIST_LISTENER_NEW =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = hsodbc))
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc) )
    :> lsnrctl start LISTENER_NEW
    5)     Configure tnsname.ora *(Machine 2)*
    SQLTEST11 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = SQLTEST))
    (HS=OK)
    :> tnsping SQLTEST11
    If No errors then conti….
    6)     Configure a file *(Machine 1)*
    Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
    Create a file
    $ vi TEST_abcdbt_ifile.ora
    something=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
    (CONNECT_DATA=
    (SID=SQLTEST))
    (HS=OK)
    $ tnsping something
    $ sqlplus system/manager
    Your connected to Oracle database *(machine 1)*
    create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
    select * from t@xyz;10 rows selected.
    Thanks,
    Edited by: ram5424 on Feb 10, 2010 7:24 PM

  • Problem while Creating Database in 10g

    Its very urgent.. Please Help..!!
    After installing 10g (Standard Edition) on Windows 2000 Server, I started creating database through Database Configuration Assistant.
    Instead of Oracle Home path, different path is specified for Database files.
    In 'Step 11 of 12' of the 'Database Configuration Assistant' I specified the 4 new table spaces to create with respective memory sizes.
    In 'Step 12' I selected 'Create a Database' and clicked 'Finish' button.
    After 7% of the Database creation progress bar, it is giving the following error:
    "ORA: 01092 ORACLE instance terminated. Disconnection forced"
    And asking for Abort..
    What could be the problem. Is it problem with installation or any other services to be started.
    After 10g installation I restarted my system.
    If required I'll provide some more information.
    Its very urgent...
    Thanks & Regards

    hi satish,
    this is not the right forum for database questions. please use the following (database) forums:
    http://forums.oracle.com/forums/index.jsp?cat=18
    regards,
    christian

Maybe you are looking for