How to create dataset profil to retrieve serial number (and more) of unknown/unsupported devices?
Hi,
We do have few non Cisco devices we need to keep track also at least using serial number. I saw some HP Procurve devices are able to be collected but we have for instance Riverbed steelhead appliances that are just missing serial number (ie. OS version, Vendor name are properly collected).
I did tried to create a custom dataset and platform definition rule but I'm not sure how to match OID request result with Collector Serial Number field.
The online help didn't help me this why I'm asking to the community. Any idea?
BTW, are we allowed the share custom dataset/platforms definitions on this forum?
Thanks,
Nicolas.
Hello Nicolas,
Given that the target devices here are Non Cisco devices, We would like to focus on that a little bit. Information about network devices from other vendors may appear in some Smart Net Total Care reports. SNTC gathers only basic information that can be obtained from standard SNMP MIBs from non-Cisco devices. Third party devices are not fully processed and analyzed the way Cisco devices are, and are shown in reports only to account for all the IP addresses the customer asked to be collected. In these reports they are clearly marked as third party.
If the same questions applies to Cisco devices, we will be happy to address that
Thanks
-Sanjeev
Similar Messages
-
Purchased CS6 as stand-alone program, tried to retrieve serial number and was told I didn't need one. I DO NOT WANT Cloud!
I guess that's something new; I didn't realize Adobe changed to some kind of online serial number retrieval process - assuming that box is legitimate. First I've heard of online serial number retrieval.
I wish you the best of luck with returning an opened software box to BestBuy. I've run afoul of their restrictive return policies before and as a result I've stopped doing business with them. Make sure you take along screen prints showing the failures you experienced.
This gives you another opportunity to consider that at $9.99 a month for the Photographer's bundle you could have a LOT of months of Creative Cloud subscrioption for the price of that $700 software (almost 6 years by my count, and you don't have to pay it all up front). I don't know about you, but I have no idea whether computers/operating systems 6 years from now will even be able to run Photoshop CS6 software purchased this year. Just a thought.
-Noel -
need to know how to track it and find where its been
You can't.
Well, if you had a .Mac account and enabled the "Find my iPhone" functions before it was stolen, maybe you could (I'm not sure how that all worked).
With a serial number and reciept, you can't track it.
You reported it stolen, right? -
1)Could someone tell me how to create partner profile in file to idoc scenario.
2)How to create RFC connection.
3)How to use IDX1 and IDX2.
Thanks
Regards
AshishAshish,
take a look at this article,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
XI ~~
1. SM59 -- Create an RFC destination for R3 system.
2. IDX1 -- Create a port to R3 system
3. IDX2 -- Import IDOC metadata.
SLD ~~
Create technical system and business system pointing to the R3 system and use this as you reciver system.
Let me know if you need any inouts.
Regards,
Bhavesh -
How to Create Roaming Profile(s) For Windows Workgroups
This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka -
How to create Creation Profile
Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanthhi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o General Parameters
- Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
- How backlog and immediate requirements are taken into account during release creation.
o Aggregation and release horizon
- If and how schedule lines should be aggregated during release creation.
o Release creation periodicity
- With which periodicity scheduling agreement releases are created
o Tolerance profile
- That for releases created as a result of changed schedule lines, the system performs a tolerance check
o Internet release
- Whether an Internet release is created during release creation -
How to create Employee Profile
Please suggest me on how to create Employee Profile .
Thanks and regards!Hi,
You can create employee profile in transaction code PPPM.
Regards,
Kapil Kaushal -
How to creat Action Profiles in CRM
Hello Experts,
Can any one guide me how to create Action Profiles in CRM for attaching the smartform ????
Regards,
Amol Tambe.
SAP CRM Technical Consultant.TR: SPRO --> IMG -->Customer Relationship Management -->Basic Functions -->Actions -->Actions in Transaction >Change Actions and Conditions>Define Action Profiles and Actions
Best Regards,
Vishant -
My Photoshop Elements 11 came with my Toshiba Qosmio. The Photoshop is freezing recently. How to reinstall? Where's the serial number?
DTebar wrote:
My Photoshop Elements 11 came with my Toshiba Qosmio. The Photoshop is freezing recently. How to reinstall? Where's the serial number?
Toshiba must have or should have provided you with a CD/DVD and seril number with the machine. however, if PSe is freezing then the first thing you need to try is to reset it to default settings. This can be done in two ways but the easiest ay to do is to go to (I am mentioning only the one method here):
<C:\Users\username\AppData\Roaming\Adobe\Photoshop Elements\11.0\Editor>
Find the file called: Adobe Photoshop Elements 11 Prefs.psp and rename it to: Adobe Photoshop Elements 11 Prefs.old
For username you need to insert the correct username or Windows profile name. Also, when you are doing this, make sure PSE is closed completely i.e. you should not have it open to do any work.
I am assuming you know how to browse the relevant folders if they are hidden in the system because this is taken for granted here. Also, the file names may not have any extensions but I am sure you know how to make them display on the screen.
Good luck. -
I submitted details to retrieve serial number for education version of CS6 Design and Web premium. Next screen after submission was Error 404. Should I be worried?
I started from the Adobe Customer Support Portal. as instructed by the accompanying documentation.That took me to here: https://www.adobe.com/cfusion/support/index.cfm?event=opencscase&loc=en_gb&issue=z015&csed utype=steI entered the details there.
From: John T Smith <[email protected]>
To: Jonathan May <[email protected]>
Sent: Sunday, 28 December 2014, 2:11
Subject: I submitted details to retrieve serial number for education version of CS6 Design and Web premium. Next screen after submission was Error 404. Should I be worried?
I submitted details to retrieve serial number for education version of CS6 Design and Web premium. Next screen after submission was Error 404. Should I be worried?
created by John T Smith in Adobe Creative Cloud - View the full discussionAre you using these links to provide your proof of status?http://www.adobe.com/store/au_edu/academic_id.htmlRedemption Code https://creative.adobe.com/educardCS6 Education https://forums.adobe.com/thread/1585740 If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7046705#7046705 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7046705#7046705 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Lost Touch in house fire can I retrieve serial number
I lost Touch in house fire, can I retrieve serial number. I have used it for years. I have three various iPods but none seem to show up in my items registered. Perhaps I am looking in the wrong place.
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
-
How do I find the time capsule serial number remotely from my mac?
How do I find the time capsule serial number remotely from my mac?
Hi All,
I found it in my Support profile. https://supportprofile.apple.com.
Thanks.
Richie -
How to create a report in Form line Style and can display Image field?
Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnpHere you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers -
How to create a query to see Opening stock and closing stock as on particul
Hi All,
How to create a query to see Opening stock and closing stock as on particul.
Regards
AlbaikHi,
In BI 0IC_C03 will provide u the required information and also having standard queries provided by the SAP.
Plz find the list of Queries provided by the SAP.
=======================================================================================================
Inventory turnover 0IC_C01_Q0001
Range of coverage - quantity 0IC_C01_Q0002
Range of Coverage - Value 0IC_C01_Q0003
Range of coverage of finished goods - quantity 0IC_C01_Q0004
Range of Coverage of Finished Goods - Value 0IC_C01_Q0005
Range of coverage of raw materials - quantity 0IC_C01_Q0006
Range of Coverage of Raw Materials - Value 0IC_C01_Q0007
Obsolete Stock on Hand 0IC_C01_Q0008
Period-dependent requirement coverage 0IC_C01_Q0009
Value of stock on hand 0IC_C01_Q0010
Quantity of stock on hand 0IC_C01_Q0011
Material consumption 0IC_C01_Q0012
Material Movements 0IC_C01_Q0013
Consignment stock: receipts and issues 0IC_C01_Q0014
Valuated stock: receipts and issues 0IC_C01_Q0015
Material stock and movements 0IC_C01_Q0016
Material Movements (Healthcare) 0IC_C01_Q0020
Material Consumption (Healthcare) 0IC_C01_Q0021
Material Availability 0IC_C01_Q0022
Inventory Turnover Frequency (Value) 0IC_C01_Q0023
Consignment Stock Received and Issued per Unit 0IC_C01_Q0024
Material Consumption (Quantity) 0IC_C02_Q0001
Valuated Stock Receipts and Issues (Quantity) 0IC_C02_Q0002
Range of Valuated Stock (Quantity) 0IC_C02_Q0003
Inventory Turnover 0IC_C02_Q0004
Receipt and Issue Consignment Stock at Customer 0IC_C03_Q0001
Receipt and Issue Quality Inspection Stock 0IC_C03_Q0002
Vendor Consignment Stock Receipt and Issue 0IC_C03_Q0003
Receipt and Issue Stock in Transit 0IC_C03_Q0004
Receipt and Issue of Blocked Stock 0IC_C03_Q0005
Valuated Stock 0IC_C03_Q0006
Stock in Quality Inspection 0IC_C03_Q0007
Stock in Transit 0IC_C03_Q0008
Blocked Stock 0IC_C03_Q0009
Vendor Consignment Stock 0IC_C03_Q0010
Consignment Stock at Customer 0IC_C03_Q0011
Stock Overview 0IC_C03_Q0012
Stock Overview (as of 3.1 Content) 0IC_C03_Q0013
Quantities of Valuated Project Stock (as of 3.1 Content) 0IC_C03_Q0014
Valuated Stock (as of 3.1 Content) 0IC_C03_Q0015
Quantities of Valuated Sales Order Stock (as of 2.1 Cont.) 0IC_C03_Q0016
Inventory Turnover 0IC_C03_Q0017
Days' Supply 0IC_C03_Q0018
SUS: Vendor Consignment Stock 0IC_C03_Q0019
Scrap 0IC_C03_Q0020
Inventory Aging 0IC_C03_Q0021
Stock Overview - extended 0IC_C03_Q0022
Demand Supply Match 0IC_C03_Q0023
Warehouse Stock Analytics Inventory Turnover 0IC_C03_Q0024
Warehouse Analytics - Obsolescence and Variance 0IC_C03_Q0025
Stock Overview: Materials 0IC_C03_Q0030
Average Stock Value Over Time 0IC_C03_Q0031
Stock Overview Over Time 0IC_C03_Q0032
Range of Coverage Over Time 0IC_C03_Q0033
==================================================================================================
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Jan 18, 2010 8:06 AM -
My ex took my MacBook and signed me out of everything he is logged into it with his Apple ID. I have proof of purchase how can I lock him out of it completely with the serial number and everything on the receipt I have?
You cannot
Maybe you are looking for
-
ITunes can't sync an audiobook with an iPhone!
iTunes will not sync an AudioBook from the iTunes Store This is ridiculous - Apple charges for an audiobook in the store, but the sync fails so I can't listen to it on my iPhone - lots of similar questions and issues posted to discussion boards, but
-
I have a question. I have a 300Dpi- 8X10 image. I want to change it to 5X7. I go image>imagesize and switch the width to 5. Why does my height go to 6.5? I have tried this on two different Macs and my instructor at college tried it. She said she neve
-
ITunes keeps losing my library every 2-3 days!
iTunes keeps losing my library every 2-3 days. Completely erasing all songs and playlists. This is incredibly annoying and forces me to redo it all AGAIN. Any way for me to solve this problem?
-
Open an EML file in Internet Explore
I have saved EML files in SharePoint Online App. I want to open the EML file directly in Outlook 2013. However the only option I have is to Save the EML file. I hope for a simple solution. This will have to be setup for many users. Please advise. Tha
-
HELP: where is "com.sun.awt.svg"?
Hi, there is sample code "HelloSVGWorld.java" for SVG generator at http://wwws.sun.com/software/xml/developers/svg/java2d-api/ can anyone kindly tell me where the package com.sun.awt.svg is. Many thanks.