How to create delivery with lesser quantity than Scheduling agreement

HI all,
I have one Scheduling Agreement SCHDMNT1 with ITEM A and Qty 100. Now i want to create 2 deliveries against this Agreement i.e DEL1 - ITEM A QTY 40 and DEL2 - ITEM A QTY 60. How to achieve this while manually entering the deliveries. What are the settings required. I also want to create such multiple deliveries against one Sales Order. What are the Configurations required to aceive this functionality.Replies will be highly appriciated.
Thanks and Regards,
Manish Khare.

Hi Manish,
When creating DEL1 change the qty of 100 for 40 and save the delivery.
When creating DLV2 QTY appears 60.
I wait to have helped.
H. Terras

Similar Messages

How to create Deliveries with lesser quantity than sales order quantity

HI all,
I have one Scheduling Agreement SCHDMNT1 with ITEM A and Qty 100. Now i want to create 2 deliveries against this Agreement i.e DEL1 - ITEM A QTY 40 and DEL2 - ITEM A QTY 60. How to aceive this while manually entering the deliveries. What are the settings required. I also want to create such multiple deliveries against one Sales Order. What are the Configurations required to aceive this functionality.Replies will be highly appriciated.
Thanks and Regards,
Manish Khare.

Hi,
In the customer master, you have to select more than one delivery allowed.
While creating delivery with reference to your sales order, the total quantity will be copied to delivery, just the change the delivery quantity and picking quantity that u want to deliver and do the PGI.
Against reference the same SO, now the remaining qty will default in the delivery. In this way u can have multiple deliveries for the same SO.
Hope this helps.
Thanks,
Viswanath

Unable to create delivery with zero quantity

Hello,
I am trying to create a Delivery using DIAPI. When I set the quantity as zero for a line item. The Delivery Note gets created with quantity 1.
I am able to create a delivery with no quantity from SBO client.
SAPbobsCOM.Documents vDLN = (SAPbobsCOM.Documents)c.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
            vDLN.CardCode = "C20000";
            vDLN.Lines.SetCurrentLine(0);
            vDLN.Lines.ItemCode = "A00001";
            vDLN.Lines.Quantity = 0;
            if (0 != returnval)
                c.GetLastError(out errNo, out errMsg);
                Console.WriteLine(errMsg);
                return;
Thanks and Regards,
Sheetal

It is DIAPI bug Note - 1001970
DI - Wrong Quantity updated when creating delivery document
The note 1001970 has not been released yet but should be soon.
This issue is candidate to be fixed in Business One version 2006
Regards,
Sheetal

How to create Delivery with sales order FM/BAPI

Hi Gurus,I'm new to SAP platform
I have created sales order ,
with this i need to create Delivery(vl01n)
so i need to give 'Shipping Point','Selection Date','SD Number'
so could any one tel me which FM/BAPI is suitable to create
Outbound delivery with 'sales order number', 'Selection date' and
"Plant or Shipping Point'.
With these Import parameters i need FM/BAPI .
Thanks in Advance
Siva Kumar kasa.

I have created delivery with that BAPI
giving 'batch number' but it was not updated,so can u tel me
any related field which need give to change batch field also.

Create delivery with 0 quantity

Hi Experts,
What is configuration setting required if delivery needs tobe created with 0 quantity.
Regards
Gali

Hi,
Maintain the confirmed quantity and delivery quantity as " 0" in the sales order for schedule lines.
Also Goto 0VLP(Zero VLP).Select your item category.Details.
Maintain blank for the field Check quantity 0.
Regards,
Krishna.

How to change delivery priority in stock transfer schedule agreements.

Hi Experts,
we have an issue, the delivery priority is changed in the customer master recently and the deliveries created for the old schedule agreements pick the old delivery priority. we need to change the delivery priority in schedule agreements.
Is there a way to change the delivery priority(in item shipping data) in stock transfer schedule agreement(doc type= LU).
I tried changing it in ME32L but its just a display.
Thanks
Mahendra

Hi All,
Can any one reply to this.
Thanks
Mahendra

How to create file with APDU

Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuang

If you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand

How to create one ISO file large than 2G

hi,
here when I create one ISO with 3G(larger than 2G) on solaris 10 machine, I met below error:
mkisofs: File too large. cannot fwrite 32768*1
Anyone has suggestion for this problem? How to create one ISO files larger than 2G?
See the detail logs information:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
mkisofs -o my.iso -A "Software DVD" -D -L -P "Study "-p CBC/XLE -r -T -V R50 -v iso
mkisofs: The option '-L' is reserved by POSIX.1-2001.
mkisofs: The option '-L' means 'follow all symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-L'.
mkisofs: Use -allow-leading-dots in future to get old mkisofs behavior.
mkisofs: The option '-P' is reserved by POSIX.1-2001.
mkisofs: The option '-P' means 'do not follow symbolic links'.
mkisofs: Mkisofs-2.02 will introduce POSIX semantics for '-P'.
mkisofs: Use -publisher in future to get old mkisofs behavior.
Warning: creating filesystem that does not conform to ISO-9660.
mkisofs 2.01 (sparc-sun-solaris2.10)
Scanning iso
Scanning iso/rac_stage3
Using RAC_S000 for /rac_stage2 (rac_stage1)
Using RAC_S001 for /rac_stage1 (rac_stage3)
Using INSTA000.1;1 for ..
Writing: The File(s) Start Block 48
0.42% done, estimate finish Thu Feb 1 16:12:35 2007
0.84% done, estimate finish Thu Feb 1 16:12:36 2007
1.26% done, estimate finish Thu Feb 1 16:12:36 2007
1.69% done, estimate finish Thu Feb 1 16:12:36 2007
2.11% done, estimate finish Thu Feb 1 16:12:36 2007
�
87.65% done, estimate finish Thu Feb 1 16:14:54 2007
88.07% done, estimate finish Thu Feb 1 16:14:54 2007
mkisofs: File too large. cannot fwrite 32768*1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thanks!

does it matter "copy protection" ? for the problem that i have?
my computer is alwyes get stuck while i trying to made a dvd or image
i made few disks wite menu in the past & i had not problems at all

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create a DSN Less Connection using MySQL

Hi All
How to create a DSN Less Connection using MySQL?
http://www.caucho.com/projects/jdbc-mysql/index.xtp and downloaded Caucho driver and installed the jar ---- caucho-jdbc-mysql-0.2.7.jar in my classpath..
this is how i embedded the code
try
driver = (Driver) Class.forName("com.caucho-jdbc-mysql-0.2.7.Driver").newInstance();
catch (Exception e)
lastErr = "Cannot load the driver, reason:"+e.toString();
nothing seems to work with code..
Unable to proceed..Any piece of code would be of great help..
Thanks and regds
Gautam

According to the installation instructions for that driver:
The driver is com.caucho.jdbc.mysql.Driver
The url is jdbc:mysql-caucho://hostname:port/database
You used something else for the driver name. So it doesn't work. By the way, I found those instructions here: http://www.caucho.com/projects/jdbc-mysql/

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

Function Module to create Delivery with JIT Calls

Hi SAP Guru's,
We are working on SAP 4.6C version.
I am looking for a function module to create delivery with JIT Calls.
We are currently using the SAP standard function module "SHP_VL10_DELIVERY_CREATE" to create Delivery with JIT Calls. Each JIT Calls has apx 60-80 materials in it and each material refers to a unique Scheduling Agreement. This function module is taking very long time in production server to create delivery, it does not take much time in dev or quality server.
We have JITV setting profile (For Sold To Party and Partner Description Profile) set as RELACE (to summarize the line items in JIT Call).
Is there another function module that we can use to create delivery with JIT Calls?
Thanks in Advance,
Amit

Hi there,
There is no such function module.
Regards
Sanju

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

How to create folder with sub folder ?

How to create folder with sub folder ?

Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David

How to create delivery with lesser quantity than Scheduling agreement

Similar Messages

Maybe you are looking for