How to create diferents deliveries for each schedule line
Dear gurus,
I have sales orders with many schedule lines in order to deliver in diferents dates. We need to create all the deliveries together but each schedule line needs to be in a diferent delivery with the corresponding delivery date.
I analiced the customizing about pool for delivery creation (VL10) but all I can change is for display and can not change the way the delivery is created. If we select two schedule line with diferent dates, the proccess create only one delivery with the total quantity and the first date of delivery.
Anybody knows some way to make the proccess create individual deliveries from diferents schedule lines?
Tanks in advance!
Marina.
Hello Marina
I hope you are using VL10E. Did you try working with Delivery creation date (range) and Delivery Date calculation rule? For example if you go for a value of 2 for the CalcRuleDefltDlvCrDt ('Rule for determining default value for deliv. creation date), then system will consider only those sched lines which are to be delivered today and tomorrow.
You also have the possibility of setting up your own routine for CalcRuleDefltDlvCrDt.
Thirdly SAP has suggested a solution for Scheduling agreements ( valid for releases upto 4.7). In this SAP has suggested solution 4 for ensuring all schedule lines are not delivered together. You can customize the code to include Sales orders ( in stead of Sched Agreements) in your case. Though it is for release 4.7, I think you can use the smae concept in ECC also.
137937 - SD scheduling agreement: Delivery split for each schedule li
Check it out and let me know how it goes. Good luck.
Similar Messages
-
Split delivery for each schedule line
Hi,
We have a requirement to split deliveries for each schedule line in the order.
For example: I have an order with one line item which has 2 schedule lines. If the schedule line date on one is 01/29 & the other is on 01/31, and the delivery due list VL10A is run with a range 01/29 - 01/31, it picks both the schedule line & combines them into one delivery.
Is there a way by which we can force them to create 2 different deliveries (as it would if the delivery due list was run for each day at a time).
We created a data transfer routine (deliveries), and populating ZUKRL with schedule line date & that doesnt solve the problem since the routine is triggered once for each sales order line and not for schedule lines.
SAP reverted back that this is standard SAP behaviour to cumulate all due schedule lines into one delivery, but I would like to know if anyone has any other solution ?
Thanks in advance!First of all you have to use VL10E to create deliveries, since it creates one delivery item for each schedule line.
Then play with your own delivery role copied from standard profile 0201:
you can trigger 3 different flags to reach your goal:
Cumul. Rule: Rule for calculation of quantity to be delivered
There is a field that contains a cumulated quantity in delivery lists
with item or schedule line views. The quantity at which the list line
(document item or schedule line) is delivered is defined in this field
when it is selected and the delivery process is started in the
background. The value is a default and can be changed by manually
processing the delivery list on the item or schedule line level.
SplitSchedLine: Rule for creating one delivery item per schedule line
In a delivery list in item view with multiple schedule lines, you can
decide for the same document item whether you want to generate one
delivery item per schedule line or whether you want to deliver the
cumulated quantity of the last schedule lines selected.
LimitSchedLine: Allow constraints on schedule line level
You can use this indicator to limit selection o
delivery when
o Delivery due date and/or
o Planned goods issue date and/or
o Route schedule
does not fall within selection range.
This should help you to solve your problem.
pls. reward points if helpful
Regards
Roberto -
How to create a PR for each Maintenance Order
Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDDHi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran. -
How to create xsd's for each table in repository instead of entire repos
Hi Gurus,
Is there any way i could create xsd's for each table in the repository separately instead of creating single xsd file from "Export repository schema" option which creates a single xml file for the entire repository.I need to create xsd for each table in repository...
Any Help greatly appreciated
Thanks
AravindOpen the Lookup table you want the XSD for, in Data manger
Export it to access.( You can select all the fields you want to export to access and then check option "open Access after export")
Now in Access, again right click the table and export it to XML.
Provided you have .NET frame work installed on the machine where you are doing this export, you can do the following:
Use XSD.exe from command prompt and get the XSD.
Use the following link as a reference for XSD stuff.
http://msdn.microsoft.com/en-us/library/x6c1kb0s(VS.71).aspx
(OR)
Get the whole XML of the repository and distill the whole structure for Lookups and create XSD using any standard XML editor. -
Delivered quantity for each schedule line
Hi,
Our scenario is that we have an order for each order's each item we can have multiple schedule lines, when any of the schedule line is delivered the delivered quantity colum is updated, the schedule lines table in VBEP but the thing is it doesnot have the delivered quantity, system calculates it at runtime or may be it is keeping it in some other table.
I hope some body can help in this regard.
Thanks
Khusro HabibIt is a calculated value, not a value of a table field. Also, it may lead to wrong results if you don't pay attention to this description of the field here under in bold.
Delivered quantity in sales units
The quantity from the schedule line that has already
been delivered.
Use
When there is more than one schedule line for an item,
the system distributes the total delivered quantity for
the item across the schedule lines according to the
sequence of their delivery.
Example
A sales order item has three schedule lines, each with
an order quantity of 50 pieces. You make two subsequent
deliveries: the first for 20 pieces, the second for 60
pieces. The delivered quantity for the first schedule
line is 50 pieces, for the second 30 pieces, and for the
third zero.
If you delete the first delivery (20 pieces), the
delivered quantity for this schedule line is still 50
pieces. However, the system reduces the delivered
quantity for the second schedule line to 10 pieces. -
Show Order Qty, Shipped out Qty, Open Qty for each SCHEDULE line of Orders?
HI Experts,
I need to show the
Order Qty
Shipped Qty
OPEN quantities(Un Shipped quantities)
at each SCHEDULE line level for all Sales orders.
So, am pulling the date like,
Order qty from VBEP-WMENG and
Open Qta from VBBE-OMENG
Then am calculating like,
Shipped Qty = VBEP-WMENG - VBBE-OMENG
But, still some SCHEDULE lines r missing in VBBE table!!
so, pls. let me know that,
1) Is there any other alternative ideas for my requirement?
2) Why some SCHEDULE lines r missing in VBBE table?
thanqTry this function module:
CALL FUNCTION 'RV_SHIPMENT_VIEW'
EXPORTING
shipment_number = tknum
option_tvtk = 'X'
option_ttds = 'X'
language = sy-langu
option_items = 'X'
option_stawn_read = 'X'
option_segments = 'X'
option_partners = 'X'
option_messages = 'X'
option_package_dialog = 'X'
option_flow = 'X'
activity = 'V'
IMPORTING
f_vttkvb = vttkvb
f_tvtk = tvtk
f_tvtkt = tvtkt
f_ttds = ttds
f_ttdst = ttdst
TABLES
f_vttp = i_vttpvb
f_trlk = i_vtrlk
f_trlp = i_vtrlp
f_vtts = i_vttsvb
f_vtsp = i_vtspvb
EXCEPTIONS
not_found = 1
delivery_missing = 3
OTHERS = 99. -
How to create multiple function for each value
Hi, I'm new to LabVIEW.
I need some help. Attached is my LabVIEW file.
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
Thanks in advance.
Attachments:
Exhaust EBT Wind Tunnel 1.1.vi 399 KBFaruq wrote:
I want to change the Formula VI for the 'Air Velocity vs Time' waveform to another formula (or multiple formula (can I use MathNode Script for this?)) to let it handle multiple values from the data and then display the result on the waveform graph. Or how can I do this?
You could simply use a case structure around the Formula Express VI. When you say MathNode Script I'm assuming you're referring to MathScript? Or are you referring to the Formula Node. With either one you'd need to convert from dynamic data to arrays. With MathScrip you need to be aware that starting with LabVIEW 2009 MathScript requires a separate license.
Another one is how to change the scale for the 'Measurement Flow' from sensor to pressure? Using pressure sensor 0V-10V to -500Pa-500Pa.
You can create a custom scale for your measurement. You can do this in the DAQ Assistant.
Attachments:
DAQ_assistant.png 30 KB -
Requirment class & Procedure for each schedule line category
Hi all,
In requirment class we have a switch on/off indicator for avai check and TOR.In define procedure for schedule line category also we have the same.
If I dont want the system to carry out availabilty check, I can switch off the indicator in requirment class or at schedule line category.
My question is why we have these indicators in 2 places.
It is written we can fine tune these settings at Define procedure for schedule line category settings
Could anyone explain in details with Business scenarious
Thanks in advance
ManoHi,
1. Availability check at Requirements Class level -
The requirements class contains all control features for planning such as relevance for
planning, requirements planning strategy and requirements consumption strategy.
In addition, it is specified at a global level whether an availability check is to take place for
the material in the sales and distribution documents on the basis of the ATP quantity
(ATP = available to promise) and whether requirements are to be passed on.
2. Availability check at Schedule line category level -
A finer degree of control can be obtained for sales documents using the schedule line category.
Replenishment lead time is only included in the check performed on the basis of the
ATP quantity.
You can control with the schedule line category whether an availability check and
transfer of requirements should be carried out in the sales documents.
Note -
1. At the global requirements class level, the availability check can only be switched on in combination with the transfer of requirements. At schedule line level, the settings are proposed from the requirements class.
2. If the availability check is switched on at requirements class level, it can be switched off at schedule line level. However, you cannot switch on the availability check at schedule line level, if it is switched off at requirements class level. You can make this setting at schedule line level. But the system ignores it and the setting for the requirements class applies.
3. Also, at schedule line level when the availability check is switched on, the transfer of requirements can be switched off. For example, this makes sense for inquiries or sales information.
4. The settings specific to schedule lines for performing an availability check are only relevant for sales documents. In the shipping documents, the settings from the requirements class and the delivery item category are used. As with the schedule line category, the availability check can be switched off as required in the delivery item category.
regards
bhaskar -
Creating a JButton for each line in a txt file
I need to know how to creating a JButton for each line in a txt file then add an actionListener to the number of buttons (note they are in a JTable). Here is a clipet of code thanx for the help (note that this is one part of a program i am making there are 2 more classes. If u need them just ask) Thanx:
class Diary extends JFrame implements ActionListener {
private JTextArea note;
private JTextField name;
private JMenuBar menu = new JMenuBar();
private JMenu file, edit, font, background, tcolor, settings, help;
private JMenuItem nu, copy, paste, save, exit, b8, b10, b12, b14, b16, b18, b20, b24, b30, bblue, bred, bgreen, bpink, cblue, cred, cgreen, cpink, eset, nver, using, about;
private String[] columnNames = {
"File"
private Vector dat = new Vector();
private JTable filetable;
public Diary() {
setSize(new Dimension(500, 500));
setTitle("Diary 2.00");
file = new JMenu("File");
menu.add(file);
nu = new JMenuItem("new");
nu.addActionListener(this);
file.add(nu);
file.add(new JSeparator());
copy = new JMenuItem("copy");
copy.addActionListener(this);
file.add(copy);
paste = new JMenuItem("paste");
paste.addActionListener(this);
file.add(paste);
file.add(new JSeparator());
save = new JMenuItem("Save");
save.addActionListener(this);
file.add(save);
file.add(new JSeparator());
exit = new JMenuItem("exit");
exit.addActionListener(this);
file.add(exit);
edit = new JMenu("Edit");
menu.add(edit);
font = new JMenu("font");
edit.add(font);
b8 = new JMenuItem("8");
b8.addActionListener(this);
font.add(b8);
b10 = new JMenuItem("10");
b10.addActionListener(this);
font.add(b10);
b12 = new JMenuItem("12");
b12.addActionListener(this);
font.add(b12);
b14 = new JMenuItem("14");
b14.addActionListener(this);
font.add(b14);
b16 = new JMenuItem("16");
b16.addActionListener(this);
font.add(b16);
b18 = new JMenuItem("18");
b18.addActionListener(this);
font.add(b18);
b20 = new JMenuItem("20");
b20.addActionListener(this);
font.add(b20);
b24 = new JMenuItem("24");
b24.addActionListener(this);
font.add(b24);
b30 = new JMenuItem("30");
b30.addActionListener(this);
font.add(b30);
background = new JMenu("background");
edit.add(background);
bblue = new JMenuItem("blue");
bblue.addActionListener(this);
background.add(bblue);
bred = new JMenuItem("red");
bred.addActionListener(this);
background.add(bred);
bgreen = new JMenuItem("green");
bgreen.addActionListener(this);
background.add(bgreen);
bpink = new JMenuItem("pink");
bpink.addActionListener(this);
background.add(bpink);
tcolor = new JMenu("text color");
edit.add(tcolor);
cblue = new JMenuItem("blue");
cblue.addActionListener(this);
tcolor.add(cblue);
cred = new JMenuItem("red");
cred.addActionListener(this);
tcolor.add(cred);
cgreen = new JMenuItem("green");
cgreen.addActionListener(this);
tcolor.add(cgreen);
cpink = new JMenuItem("pink");
cpink.addActionListener(this);
tcolor.add(cpink);
settings = new JMenu("Settings");
menu.add(settings);
eset = new JMenuItem("Edit Settings");
eset.addActionListener(this);
settings.add(eset);
help = new JMenu("Help");
menu.add(help);
using = new JMenuItem("Using");
using.addActionListener(this);
help.add(using);
about = new JMenuItem("About");
about.addActionListener(this);
help.add(about);
help.add(new JSeparator());
nver = new JMenuItem("new Versions");
nver.addActionListener(this);
help.add(nver);
note = new JTextArea("");
try {
BufferedReader filein = new BufferedReader(new FileReader("files.txt"));
String sfile;
while ((sfile = filein.readLine()) != null) {
//add buttons per each line of the txt file and show em
catch (FileNotFoundException ioe) {
JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
catch (IOException ioe) {
JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);JOptionPane.showMessageDialog(null, "Iternal Error, contact [email protected] if the error persists", "", JOptionPane.WARNING_MESSAGE);
String[][] data = new String[dat.size()][];
for (int x = 0; x < dat.size(); x++) {
data[x] = (String[])dat.get(x);
filetable = new JTable(data, columnNames);
filetable.setPreferredScrollableViewportSize(new Dimension(100, 500));
JScrollPane scrollpane = new JScrollPane(filetable);
name = new JTextField("diary");
JPanel main = new JPanel(new GridLayout(0, 1));
getContentPane().add(note);
getContentPane().add(name, BorderLayout.SOUTH);
getContentPane().add(scrollpane, BorderLayout.WEST);
setJMenuBar(menu);
public void actionPerformed(ActionEvent e) {
if (e.getSource() == nu) {
int nuask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to make a new entry?\nThis will erease any unsaved entry's!!");
if (nuask == JOptionPane.YES_OPTION) {
note.setText("");
note.setBackground(Color.WHITE);
note.setForeground(Color.BLACK);
if (e.getSource() == copy) {
note.copy();
if (e.getSource() == paste) {
note.paste();
if (e.getSource() == save) {
try {
String sn = name.getText();
FileWriter outputStream = new FileWriter("saved/" + sn + ".txt");
setTitle("Diary 1.00 : " + sn);
outputStream.write(note.getText());
outputStream.close();
catch(IOException ioe) {
System.out.println("IOException");
if (e.getSource() == exit) {
int exitask = JOptionPane.showConfirmDialog(Diary.this, "Are you sure you want to exit? Any unsaved entries will be deleted");
if (exitask == JOptionPane.YES_OPTION) {
System.exit(0);
if (e.getSource() == b8) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),8));
if (e.getSource() == b10) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),10));
if (e.getSource() == b12) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),12));
if (e.getSource() == b14) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),14));
if (e.getSource() == b18) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),18));
if (e.getSource() == b20) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),20));
if (e.getSource() == b24) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),24));
if (e.getSource() == b30) {
note.setFont(new Font(note.getFont().getName(),note.getFont().getStyle(),30));
if (e.getSource() == bblue) {
note.setBackground(Color.BLUE);
if (e.getSource() == bred) {
note.setBackground(Color.RED);
if (e.getSource() == bgreen) {
note.setBackground(Color.GREEN);
if (e.getSource() == bpink) {
note.setBackground(Color.PINK);
if (e.getSource() == cblue) {
note.setForeground(Color.BLUE);
if (e.getSource() == cred) {
note.setForeground(Color.RED);
if (e.getSource() == cgreen) {
note.setForeground(Color.GREEN);
if (e.getSource() == cpink) {
note.setForeground(Color.PINK);
if (e.getSource() == eset) {
new UserSettings().setVisible(true);
if (e.getSource() == about) {
JOptionPane.showMessageDialog(null, "Created by Collin Doering 2005 in Gr.9\n\nErrors:\n------------------------------------------------------------------\n1. No File Encryption\n2. No user and password Encryption", "", JOptionPane.INFORMATION_MESSAGE );
if (e.getSource() == nver) {
JOptionPane.showMessageDialog(null, "New Version |3.00| expected July, 2005\n\nNew Features\n----------------------------------------------\n1. File Encryption\n2. User File Encryption\n3. Full help dialog\n4. More Text changing features", "", JOptionPane.INFORMATION_MESSAGE);
if (e.getSource() == using) {
JOptionPane.showMessageDialog(null, "Go ask Collin Doering\[email protected]", "", JOptionPane.INFORMATION_MESSAGE );
THANK YOUso i still do not understand how i would create one
button per each line in a txt flle then read in the
file that the txt file specified.This assumes you know how many lines there are in the file.
If not, modify as per my prior post
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Testing extends JFrame
String[] linesInFile = {"Hello","World","Goodbye","Now"};
JButton[] btn = new JButton[linesInFile.length];
public Testing()
setLocation(200,200);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel jp = new JPanel(new GridLayout(0,1));
for(int x = 0; x < btn.length; x++)
btn[x] = new JButton(linesInFile[x]);//<---this would be where file.readLine() goes
jp.add(btn[x]);
btn[x].addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae){
JOptionPane.showMessageDialog(getContentPane(),ae.getActionCommand());}});
getContentPane().add(jp);
pack();
public static void main(String[] args){new Testing().setVisible(true);}
} -
How to create a attribute for a table
I am created a table with four columns.
How to create a attribute for each column.........Hi Cranjith Kumar,
First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
Reward points if useful.
Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM -
Creating Named lov for each row..........
How to create Named LOV for each row in a field.
i have a tabular in a page. In that tabular i have three fields service_code,*service_name* and No_units.
i have to create lov for service_code for all rows.
how to do this?
plz help...Hi Frank,
This is the method i wrote in the managed Bean. It works when I hard code the department value to some value(like 10).
public List<SelectItem> getEmployeeList() {
int Deptid = 10;
ArrayList<SelectItem> employees = new ArrayList<SelectItem>();
employees.add(new SelectItem("0", "--Select Employee---"));
try {
Connection con = getConnection();
PreparedStatement ps =
con.prepareStatement("select name from employees where department_id = ?");
ps.setInt(1, Deptid);
ResultSet rs = ps.executeQuery();
while (rs.next()) {
employees.add(new SelectItem(rs.getString("name")));
rs.close();
ps.close();
con.close();
} catch (Exception ex) {
System.out.println(ex.getMessage());
return employees;
How can I pass the row Department Id to this method in the f:selectItems?
I really appreciate your help in resolving this issue.
Thanks -
Public API's to create delivery for each delivery line
I've requirement to create unique delivery for each delivery line using API. Can any body use public API to meet this requirement. Please ! any idea and thought !
R12.
Thanks in Advance,
RamanaTry the WSH_DELIVERIES_PUB.Create_Update_Delivery API. The API creates a new delivery record or updates an existing delivery record in WSH_NEW_DELIVERIES table. The DELIVERY_ID, NAME and return status of a new delivery are passed as OUT parameters, while the DELIVERY_ID or NAME of an existing delivery for update is passed as an IN parameter.
Pass IN parameter p_action_code value UPDATE ---> incase you want to update existing delivery.
Pass IN parameter p_action_code value CREATE --> incase you want to create a new dleivery.
Parameter Usage Type Required
p_api_version_number IN Number x
p_init_msg_list IN Varchar2 -
x_return_status OUT Varchar2 -
x_msg_count OUT Number -
x_msg_data OUT Varchar2 -
p_action_code IN Varchar2 x
p_delivery_info IN OUT Record x
p_delivery_name IN Varchar2 -
x_delivery_id OUT Number -
x_name OUT Varchar2 -
I hope all this infor. comes handy.
-Dhawang -
When I load one of my own cd's onto itunes, it creates separate albums for each unique pairing (ie: singer/composer or singer/orchestra). I end up with
the cuts scattered over several albums. How do I keep all the cuts on an album together rather than divided between several albums? I'm brand new with this technology, so I need your information in simple terms. Thank-you.Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
The site could do with updating as some options have changed with iTunes 11, but the principles are the same.
tt2 -
When I transferred my iPhoto from macbook to iMac it created double events for each, how do I correct this?
How did you do it?
Here's what should work:
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
How to know - For a schedule line if delivery is already created
Hi Gurus,
I have a sales order with one line item - 10.
For the line item 10 , I have 2 schedule lines.
How can we know if delivery is created for a schedule line.
Which table we need to refer ? VBEP !!!
Please help.
Regards
Avinash.Hi,
There is no way to check that but you can check the status of sales order line itam is delivered or not in table VBUP
and filed RFGSA.
Not Relevant
A Not yet processed
B Partially processed
C Completely processed
Thanks.
Maybe you are looking for
-
Hi, I am relatively new to JDeveloper extension development. I am currently working with my ESB team to develop an extension to do certain things with the diagram. We are stuck when we are trying to get the oracle.tip.tools.ide.esb.addin.DiagramEdito
-
On OS X Lion Mountain, how can I get the escape key to work?
While typing i accidentally disabled the f keys (f1-f10) on the first row and the esc key. After trying to find a solution i manage to enable he f keys but works only after typing the fn key with an f key. The esc key still doesnt work. Can someone h
-
Respected All, In Purchase order PLD in item description i want to add line Text in same table of item description how i can do this. Regards Mangesh
-
Itunes Internet Radio. Can I get the URL's out to stream on other units?
I just purchased a SONOS music system. I would like to take some of my itunes internet Radio stations and play on my sonos. I just can't find the URL's for the stations. is there a way to get this info?
-
With TMG EOL what can I replace with?
My TMG 2010 is used mainly for reverse proxy for internal .NET applications, OWA, etc. What MS products or third party products are available to replace this functionalility?