How to create drop down option in service manager 2012 incident portal

Hii,,
Please assist how to create drop down option in service manager 2012 SP1 default incident portal. We would like to provide the drop down option in "Please enter the title for the Issue" to our users.
Regards, Syed Fahad Ali

As was already referenced, you could use a Simple List for the prompt, however if you are referring to the default General Incident that is available out-of-the-box, you might be limited in what you can modify.
I did some work for a client, that wanted to have a list and other options for the General Incident through the Portal. So, I ended up having to create a custom General Incident instead of using the default one, which will then allow you to add any type
of prompts, and configure them as you want (i.e. with a simple list).

Similar Messages

How to create Drop down menu in the selection screen

Hi all,
How to create Drop down menu in the selection screen.
Fast answer will be highly rewarded
Regards
Bikas

hi ,
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
 it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
 wa_vbap TYPE vbap,
 it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
 li_list TYPE vrm_values ,
 v_count TYPE i,
 l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
 l_value-key = it_vbak-vbeln .
 l_value-text = it_vbak-vbeln .
 APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
 EXPORTING
 id = 'P_TEST'
 values = li_list
 EXCEPTIONS
 id_illegal_name = 1
 OTHERS = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
 matnr
 meins
 FROM vbap
 INTO CORRESPONDING FIELDS OF TABLE it_vbap
 WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
 matnr
 meins
 FROM vbap
 INTO CORRESPONDING FIELDS OF TABLE it_vbap
 WHERE vbeln = p_test.
LOOP AT it_vbap.
 WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*& Form get_Data
 text
--> p1 text
<-- p2 text
FORM get_data .
SELECT vbeln
 FROM vbak
 INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM. " get_Data
regards,
venkat.

How To Create Drop Down Menu With Tab

hi
How To create Drop Down Menu with tab in Header of application like website Horizontal Dropdown Menu In html.
Thanks
Manoj
Edited by: Manoj Kaushik on Dec 30, 2009 4:16 AM

Try the Apex forum {forum:id=137} someone there may have an answer.
Which version, that could be important, XE out-of-the-box has apex 2.1 if it hasn't been upgraded to 3.x

How to keep drop down option to one field in a ztable

hi all,
i created one ztable in this table i have two fields
fieldnames are matnr and indicator.
now my requirement is i have to keep drop down option for indicator field. when i click on this field it has to show three vales 'X' OR 'Y' OR 'Z'.
anybody can tell me how to do this.
thanks,
maheedhar

Hi Maheedhar,
Declare the field value on the selection screen as shown below.
PARAMETERS: p_matnr LIKE ztable-field AS LISTBOX VISIBLE LENGTH 10.
and maintain those 3 values(X,Y and Z) at the domain level in that field of the Ztable.
If Problem solved REWARD points and close the thread otherwise reply.
Regards,
Mukesh Kumar
Message was edited by:
mukesh kumar

How to create Drop Down box in screen painter..??

Can anybody give me sample code or detailed description about creating Drop-Down Box in a screen...??
I have created the drop down box in screen..
But how to make data to be visible in Dropdown box, when i click the drop icon in that box...???
Regards
Pavan Sanganal

Here are couple of DEMO programs for the same functionality
DEMO_DROPDOWN_LIST_BOX
DEMO_DYNPRO_DROPDOWN_LISTBOX
You execution sequence will be PBO - Process before output, then the screen is displayed and the PAI Process after input.
Regards,
Ravi
Note : Please mark all the helpful answers

How to create drop down menu

Hi
Can we create drop down menus in HTML DB as we do in
Visual Basic.
Thanks.

In HTML DB v2.0 you can create drop down menus. I cannot say if they are the same as Visual Basic because I am not familiar with VB..
Here is an example pull-down menu:
 A B C <--- Top level
 A1 B1 <--- Second level
 A2 <--- Third levelInitially the user sees a horizontal menu with "A", "B', and "C". When the user clicks on "A" a menu containing "A1" and "A2" is displayed under "A".
Here is what you do to create this:
1.) Edit a page.
2.) Click the "Create" (plus sign) button in the "Lists" region under "Shared Components".
3.) Enter a List name.
4.) Make the "List Template" be "DHTML Menu with Sublist".
5.) Click the "Create List Entry >" button on the right. You are now creating your Top Level menu.
6.) Enter "A" into the "List Entry Label".
7.) Set "Target Type" to "- No Target -". This could be an URL or another page in the application.
8.) Click the "Create and Create Another" button. You are now create the lower level menus.
9.) Select "A" for the "Parent List Entry".
10.) Enter "A1" into the "List Entry Label".
11.) Set "Target Type" to "- No Target -".
12.) Repeat steps 8, through 11 for "A2".
13.) Click the "Create and Create Another" button.
14.) Repeat steps 6 through 12 for "B" and "B1".
15.) Click the "Create and Create Another" button.
16.) Repeat steps 6 and 7 for "C".
17.) Click the "Create" button.
18.) Click the "Add this list to the current page" link.
19.) Specify the region information for the menu and click "Next" button.
20.) Click the "Create List Region" button.
Mike

How to create drop-down menu with transparency

Hello,
Is it relatively easy to create drop-down menu's with
transparent drop downs? Any step by step help would be greatly
appreciated.
I thank you in advance,
Jaz

jasperjaz schrieb:
> Looks like some cool stuff. However, nothing on drop
downs
>
Take a look at "Creating Animated Buttons". The Tweening of
the text to
the right and changing the color perhaps could be replaced or
appended
by your drop-down-needs? The Drop-Down is another Animated
Button!?
Bye
Klaus

How to create drop down div

Hello all,
I have no idea how to describe what I am asking besides the term "drop down div". Though I am not sure if that is the correct term.
I have been tasked to create a quiz similar to the one linked below.
Bioenergy Quiz
The two elements of this quiz that have me stumped are below. Any help you can provide will be greatly appreciated. Thank you.
1) How to set up the drop down div functionality?
So when the "Start Quiz" button is clicked, the content for the Question 1 is added to the bottom of the content for the Bioenergy Quiz title.
2) How is the focus changed to the new content?
How is the functionality set up to go down to the bottom of the page to show the new content?

Hi Charles,
Here is a case. A drop down list can be created using the select tag.
You can open a new file and copy and paste this code.
1) creationComplete panel:
var optionTags = "<option>Title</option><option value='case1'>first Case</option><option value=case2>second Case</option><option value='case3'>third Case</option>";
sym.$( "<select id='options' title='Please one choice'>"+optionTags+"</select>" ).appendTo( "#Stage" );
sym.$("#options").css({ "cursor":"pointer", "position":"absolute", "top":"20px", "left":"20px","width":"100px"});
2) compositionReady panel:
var userChoice = function(){
switch( sym.$("#options").val() ){
case "case1":
//add code here
console.log("case1 selected");
break;
case "case2":
//add code here
console.log("case2 selected");
break;
case "case3":
//add code here
console.log("case3 selected");
break;
default:
//add code here
} // switch
} // userChoice function
sym.$("#options").change( userChoice );
It returns using Safari 8:
Note: jQuery is required.

How to create drop-down list in Portal??

My case: I have three locations A B C(in the database) for example.
I would like to use drop-down list to show list of All, A, B, and C.
After I choose any of them, for example A, it must show all the data of that particular location and if it is All it must show data of all three locations.
By using Simple Parameter, it's just a static one but I prefer the dynamic one that get directly from the database. And I also got a problem of showing all locations by choosing All in my dropdown menu
Any idea??!?
Thank you so much.

You could try a dynamic page: 
 
&LT;html&GT; 
&LT;body&GT; 
 
&LT;form action="http://host.port/pls/portal/etc." method="get"&GT; 
&LT;select name="location"&GT; 
&LT;ORACLE&GT; 
for rec in (select loc_code, loc_name from locations union select '-1' id, 'All' loc_name from dual) 
loop 
htp.p('&LT;option value="' || rec.loc_code || '"&GT;' || rec.loc_name || '&LT;/option&GT;'); 
end loop; 
&LT;ORACLE&GT; 
&LT;/select&GT; 
&LT;/form&GT; 
 
&LT;/body&GT; 
&LT;/html&GT; 
 
The form should then call your page with a &location=loc_code in the url. Using a page parameter and a bound variable you can access that. You may need to use a decode in your sql to deal with the All scenario: 
 
select ..... where loc_code like decode(:location, -1, loc_code, :location) 
 
Hope this helps. 
 
Patrick

How to create Drop-Down with Function Module REUSE_ALV_GRID_DISPLAY

Hi Experts,
I have used Reuse_alv_grid_display function module in my report for ALV output. I have a requirement to add drop down in one cell of my output. I have searched but all are suggesting through OOPS programing that I can not use.
If it is possible with the given scenerion , please help me how to write the code for it?
Thanks a bunch in advance.

Hi,
You can check demo programs:
BCALV_EDIT_06
BCALV_EDIT_07
Hope it helps
Regards
Mansi

How To Create Drop Down List?

Hi All,
I Want to Create DropDown list For Company Code.
I Gave Control Property As 'DropDownList'
In Entry List, I Gave System Object And Bapi.
After It Displays Input And Output.
What Value I Assign to Company Code
in Both Input And Output Ports.
This is Very Urgent,please Give Steps For Quick Understanding.
Thanks & regards
SubbaRao Chinta.

subbarao
1- right click on your drop down list.
2- choose properties.
3- goto the entry list tabl
4- select dynamic entry list.
5- choose your system and search for the BAPI --> BAPI_COMPANYCODE_GETLIST.
No input is required for this bapi
6- for the output choose COMPANYCODE_LIST
VALUE --> @COMP_CODE
TEXT --> @COMP_NAME
Regards,
Sami
Edited by: Sami Ahmed on Mar 24, 2008 10:54 AM

How to create drop down menu in my report

hi all
i have a list of options which i have to display as a drop down menu
pls guide me to do
thanks in advance

hi,
u want like this?
parameters: p_mode as listbox visible length 10.
parameters: p_mode1 as listbox visible length 10.
AT SELECTION-SCREEN OUTPUT.
PERFORM fill_dropdown_list USING 'p_mode'(001).
PERFORM fill_dropdown_list1 USING 'p_mode1'(007).
FORM fill_dropdown_list USING value(f_parameter).
TYPE-POOLS: vrm. " For parameter drop down lists
DATA: name TYPE vrm_id,
           list TYPE vrm_values,
           value LIKE LINE OF list.
name = f_parameter.
value-key = 'C'.
value-text = 'Fist'.
APPEND value TO list.
value-key = 'F'.
value-text = 'Second'.
APPEND value TO list.
value-key = 'H'.
value-text = 'Third'.
APPEND value TO list.
value-key = 'D'.
value-text = 'Forth'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
ENDFORM.                       " fill_dropdown_list
FORM fill_dropdown_list1 USING value(f_parameter).
TYPE-POOLS: vrm. " For parameter drop down lists
DATA: name TYPE vrm_id,
           list TYPE vrm_values,
           value LIKE LINE OF list.
name = f_parameter.
value-key = 'C'.
value-text = 'Fist'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
ENDFORM.                       " fill_dropdown_list

How to create drop down menus

I want to know how to make the drop down menus for my
navigation bar. I really want the menus to pop out to the right. Do
I have to buy a java script to do this. I am a relativly new
developer. I know some HTML and am just learning CSS. I am using
Dreamweaver to construct my pages. I dont know java scripting and
dont know how hard it is to do so don't know if this is something I
can make on my own or if I can copy one from a free source or buy
one. Thanks for any help. aekp

Check the uberlink and MacFly tutorials at PVII
http://www.projectseven.com/)
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/)
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp)
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"aekp" <[email protected]> wrote in message
news:en12bl$25c$[email protected]..
>I want to know how to make the drop down menus for my
navigation bar. I
>really
> want the menus to pop out to the right. Do I have to buy
a java script to
> do
> this. I am a relativly new developer. I know some HTML
and am just
> learning
> CSS. I am using Dreamweaver to construct my pages. I
dont know java
> scripting and dont know how hard it is to do so don't
know if this is
> something
> I can make on my own or if I can copy one from a free
source or buy one.
> Thanks for any help. aekp
>

How to add drop down list for query manager report in sap business one

Hi Every one,
I need drop down list for parameter selection in sap business one Query Manager.I have two Parameters 'Sales Order','Invoice'.
Please suggest.
Thanks and Regards
DEV

Hi,
you need to use this :
/*select from [dbo].[OINV] T2*/
DECLARE @Invoice varchar(100)
/*where*/
set @Invoice =/* T2.DocNum */N'[%2]'
you can change the tables and the parameter number but you have to write it exactly that way.
when you run the query within the SBO you will get list of objects ( in this case list of invoices)
hope it was helpful
Shachar

How to create new connection in directory service manager

Hello,
I have upgraded OID from 10.1.4.3 to 11.1.1.6. after upgrade i used below url to connect directory service manager.
http://hosname:7005/odsm
trying to create new connection but not able to connect getting below error
"Bind Failed. Host='dog1044' Details : dog1044:3060"
using below value while creating new connection
select OID
Name : 11goid
server : oidserver01
port : 3060
username : cn=orcladmin
Thanks
Karthick K

Karthick,
Or try to bind it from your ODSM server, eg: ldapbind -h oidserver01 -p 3060 -D "cn=orcladmin" -w xpto
I hope this helps,
Thiago Leoncil.

How to create drop down option in service manager 2012 incident portal

Similar Messages

Maybe you are looking for