How to create dynamic data tables with ADF 10g

Hi,
Can anyone provide sample code for creating dynamic data table in adf where column & row will be added dynamically according to the data coming from the Array List of data.
I appreciate your help here.

I think you've posted to the wrong forum. This one is for WebLogic Portal questions.
Try the ADF/DVT forum:
http://myforums.oracle.com/jive3/forum.jspa?forumID=1565

Similar Messages

How to create Dynamic internal table with columns also created dynamically.

Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
Nara

I don't understand ...
something like that ?
*   Form P_MODIFY_HEADER.                                              *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
         v_count(2)      type n ,
         v_date          type d ,
         v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
          is_fieldcatalog-fieldname+0(3) eq 'VAL' .
    move : is_fieldcatalog-fieldname+3(2) to v_count ,
           p_perb2+5(2)                   to v_date+4(2) ,
           p_perb2+0(4)                   to v_date+0(4) ,
           '01'                           to v_date+6(2) .
    v_count = v_count - 1.
    call function 'RE_ADD_MONTH_TO_DATE'
        exporting
          months        = v_count
          olddate       = v_date
        importing
          newdate       = v_date.
    if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
      concatenate 'Quantité 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    else.
      concatenate 'Montant 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    endif.
    move : v_buff to is_fieldcatalog-scrtext_s ,
           v_buff to is_fieldcatalog-scrtext_m ,
           v_buff to is_fieldcatalog-scrtext_l ,
           v_buff to is_fieldcatalog-reptext .
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform.                     " P_MODIFY_HEADER

How to create an editable table in ADF 10g??

Hi,
I want to create a editable table using the Jdev 10g.. so that i can do read and write on the table. Can anyone tell me how i can create it...
thanks in advance

Hi,
using ADF BC and ADF, one of the options when dragging a ViewObject from the data control palette is ADF Table. This creates an updateable table
Frank

Creating Dynamic Internal table with a dynamic name

Hi,
I want to create dynamic internal tables with dynamic names.
For example:
Suppose I have a table with three fields.
1. Structure name
2.Fields
3.file
And the structure of the internal table is as follows:
TYPES:BEGIN OF table_type,
 struct TYPE char70,
 fields TYPE tt_type OCCURS 0,
 File TYPE ttab_type OCCURS 0,
 END OF table_type.
Suppose I have one record inside my internal table with struct as "STRUCTURE", fields have an internal table content of set of fields and File has some set of records.
Now I want to create dynamic internal table whose name will be "STRUCTURE" , the fields of the dynamic internal table structure[] will be as in fields, and the records will be as in File.
Like this if i have 100 records in my internal table then I have to create 100 dynamic internal table dynamically.
Can anyone suggest how to do this?
Edited by: Jjammy on Jul 22, 2009 7:52 AM

Hi,
Check the sample program and develop your program accordingly.
<pre>
REPORT ztest_notepad.
*& Declarations
*Type-pools
TYPE-POOLS:
 slis.
*Types
TYPES:
 ty_fcat TYPE lvc_s_fcat,
 ty_fcatalog TYPE slis_fieldcat_alv.
*Work areas
DATA:
 wa_fcat TYPE ty_fcat,
 wa_fcatalog TYPE ty_fcatalog.
*Internal tables
DATA:
 it_fcat TYPE STANDARD TABLE OF ty_fcat,
 it_fcatalog TYPE STANDARD TABLE OF ty_fcatalog.
*Type reference
DATA:
 it_dyn_tab TYPE REF TO data,
 wa_newline TYPE REF TO data.
*Filed symbols
FIELD-SYMBOLS:
 <gt_table> TYPE STANDARD TABLE,
 <fs_dyntable>,
 <fs_fldval> TYPE ANY,
 <l_field> TYPE ANY.
*Variables
DATA:
 l_fieldname TYPE lvc_s_fcat-fieldname,
 l_tabname TYPE lvc_s_fcat-tabname,
 l_fieldtext TYPE lvc_s_fcat-seltext,
 l_index TYPE char2.
"Selection-screen
PARAMETERS:
 p_colms TYPE i.
*& start-of-selection.
START-OF-SELECTION.
PERFORM build_fieldcat.
PERFORM create_dynamic_table.
DO 20 TIMES.
 DO p_colms TIMES.
 l_index = sy-index.
 CONCATENATE 'FIELD' l_index INTO l_fieldname.
 ASSIGN COMPONENT l_fieldname OF STRUCTURE <fs_dyntable> TO <l_field>.
 <l_field> = sy-index.
 ENDDO.
 INSERT <fs_dyntable> INTO TABLE <gt_table>.
ENDDO.
LOOP AT it_fcat INTO wa_fcat.
 PERFORM fieldcatalog1 USING: wa_fcat-fieldname
 wa_fcat-tabname
 wa_fcat-seltext.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = 'ZTEST_NOTEPAD'
 it_fieldcat = it_fcatalog
 TABLES
 t_outtab = <gt_table>.
*& Form BUILD_FIELDCAT
FORM build_fieldcat .
CLEAR: l_fieldname,
 l_tabname,
 l_fieldtext,
 l_index.
DO p_colms TIMES.
 CLEAR l_index.
 l_index = sy-index.
 CONCATENATE 'FIELD' l_index INTO l_fieldname.
 CONCATENATE 'Field' l_index INTO l_fieldtext.
 l_tabname = '<GT_TABLE>'.
 PERFORM fieldcatalog USING: l_fieldname
 l_tabname
 l_fieldtext.
ENDDO.
ENDFORM. " BUILD_FIELDCAT
*& Form CREATE_DYNAMIC_TABLE
FORM create_dynamic_table .
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fcat
 IMPORTING
 ep_table = it_dyn_tab.
ASSIGN it_dyn_tab->* TO <gt_table>.
Create dynamic work area and assign to FS
CREATE DATA wa_newline LIKE LINE OF <gt_table>.
ASSIGN wa_newline->* TO <fs_dyntable>.
ENDFORM. " CREATE_DYNAMIC_TABLE
*& Form FIELDCATALOG
FORM fieldcatalog USING field table f_txt.
wa_fcat-fieldname = field.
wa_fcat-tabname = table.
wa_fcat-seltext = f_txt.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " FIELDCATALOG
*& Form FIELDCATALOG1
FORM fieldcatalog1 USING field table f_txt.
wa_fcatalog-fieldname = field.
wa_fcatalog-tabname = table.
wa_fcatalog-seltext_m = f_txt.
APPEND wa_fcatalog TO it_fcatalog.
CLEAR wa_fcatalog.
ENDFORM. " FIELDCATALOG1 </pre>

Thanks
Venkat.O

How to create dynamic connection string with variables using ssis.

Hello,
Can anyone let me know on how to create dynamic connection string with variables using ssis?
Any help would be appreciated.

Hi vinay9738,
According to your description, you want to connect multiple database from multiple servers using dynamic connection.
If in this case, we can create a Table in our local database (whatever DB we want) and load all the connection strings. We can use Execute SQL Task to query all the connection strings and store the result-set in a variable of object type in SSIS package.
Then use ForEach Loop container to shred the content of the object variable and iterate through each of the connection strings. And then Place an Execute SQL task inside ForEach Loop container with the SQL statements we have to run in all the DB instances.
For more details, please refer to the following blog:
http://sql-developers.blogspot.kr/2010/07/dynamic-database-connection-using-ssis.html
If there are any other questions, please feel free to let me know.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

How we create new data base in oracle 10g express edition

hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition

Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM

How 2 create dynamic internal table and can we pass it to gui_download FM

HI all,
 How can we create a dynamic internal table?
I have a requirement where i have to create an internal table with the no. of fields depending on the selection screen values, i think tat can be possible though dynamic creation only.
 How to solve this issue..?Pointers will be very much useful..
Thanks
Sunny.

hi
Follow the code it will help you out....
REPORT YUSMM_TEXT2 .
*TABLES
TABLES: MARA, " General Material Data
 MAKT, " Material Descriptions
 T002. " Language Keys
* GLOBAL TYPE-POOL
TYPE-POOLS : SLIS.
* GLOBAL TYPES
TYPES: BEGIN OF TP_LANG ,
 SPRAS LIKE T002-SPRAS,
 LAISO LIKE T002-LAISO,
 SRNO(3) TYPE N,
 END OF TP_LANG.
TYPES: BEGIN OF TP_MATNR,
 MATNR LIKE MARA-MATNR,
 BEGRU LIKE MARA-BEGRU,
 END OF TP_MATNR.
* DECLARATION FOR GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA:GT_MAKT TYPE STANDARD TABLE OF MAKT, "Materialkurztexte,
 GT_THEAD TYPE STANDARD TABLE OF THEAD, "SAPscript: Text-Header,
 GT_LINETAB TYPE STANDARD TABLE OF TLINE, "SAPscript: Text-Zeilen,
 GT_T002 TYPE STANDARD TABLE OF T002. "Language key
DATA: BEGIN OF GV_TEXT_OUTPUT_LINE,
 MATNR LIKE MARA-MATNR,
 BEGRU LIKE MARA-BEGRU,
 MAKTX LIKE MAKT-MAKTX,
 LTXT40(1250) TYPE C,
 SRNO(3) TYPE N,
 SPRAS LIKE T002-SPRAS,
 END OF GV_TEXT_OUTPUT_LINE.
DATA: GT_MATNR TYPE STANDARD TABLE OF TP_MATNR,
 WA_GT_MATNR TYPE TP_MATNR.
DATA: GT_LANG TYPE STANDARD TABLE OF TP_LANG,
 WA_GT_LANG TYPE TP_LANG.
DATA: GT_TEXT_OUTPUT_LINE LIKE STANDARD TABLE OF GV_TEXT_OUTPUT_LINE,
 GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 GV_FIELDCAT LIKE LINE OF GT_FIELDCAT,
 CT_GT_FIELDCAT_IN LIKE GV_FIELDCAT,
 GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
 GV_REPID TYPE SY-REPID.
DATA: BEGIN OF GV,
 FORMER_ERROR LIKE SY-MARKY, " Fehlermeldung bereits
 FILE_OPEN(1), " Flag open file
 REC_LENGTH TYPE I, " record length
 MATNR TYPE MARA-MATNR, " material
 REPID TYPE SYST-REPID,
 RETCO TYPE SY-SUBRC,
 END OF GV.
DATA: GV_MAKT TYPE MAKT,
 GV_T002 TYPE T002,
 GV_LANGU TYPE THEAD-TDSPRAS.
* DECLARATION FOR FIELD-SYMBOLS
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
 <FS_DATA1> TYPE REF TO DATA,
 <FS_2> TYPE STANDARD TABLE,
 <FS_22> TYPE STANDARD TABLE,
 <FS_1>,
 <FS_11>,
 <F>,
 <FA>,
 <LWA_LINE_WA>,
 <LWA_LINE_WA1>.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: L_LT TYPE SLIS_LAYOUT_ALV.
DATA: WA_IT_FLDCAT TYPE LVC_S_FCAT.
DATA: WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: GP_TABLE TYPE REF TO DATA.
DATA: WA_NEWLINE TYPE REF TO DATA.
*DECLARATION FOR CONSTANTS
CONSTANTS:
 BEGIN OF GC,
 TDID_GRUN TYPE THEAD-TDID VALUE 'GRUN',
 TDOBJECT_MAT TYPE THEAD-TDOBJECT VALUE 'MATERIAL',
 ON(01) TYPE C VALUE 'X',
 YES(01) TYPE C VALUE 'X',
 TXT(25) TYPE C VALUE 'MATERIAL DETAILS',
 MAT(25) TYPE C VALUE 'MATERIAL NUMBER',
 AUT(25) TYPE C VALUE 'AUTHORIZATION GROUP',
 FOUND TYPE SY-SUBRC VALUE '00', " Return-Code
 RC_OK TYPE SY-SUBRC VALUE '00', " Return-Code
 OFF TYPE SY-SUBRC VALUE '00', " return code
 FALSE TYPE SY-SUBRC VALUE '00', " boolean
 TRUE TYPE SY-SUBRC VALUE '01', " boolean
END OF GC.
* DECLARATION FOR VARIABLES
DATA: V(3) TYPE N,
 STR TYPE STRING,
 STR1 TYPE STRING,
 V_VAR(3) TYPE N,
 V_VAR1(3) TYPE N,
 V_FIELDNAME(15) TYPE C,
 V_CHAR(15) TYPE C,
 V_LINES(3) TYPE N,
 MAKTEXT LIKE MAKT-MAKTX,
 LT_DATA TYPE REF TO DATA,
 LT_DATA1 TYPE REF TO DATA,
 LWA_LINE TYPE REF TO DATA,
 LWA_LINE1 TYPE REF TO DATA.
*SELECTION-SCREEN AND PARAMETERS
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
S_MATNR FOR MARA-MATNR, "MATERIAL NUMBER
S_MTART FOR MARA-MTART, "MATERIAL TEXT
S_LANG FOR MAKT-SPRAS. "LANGUAGE
PARAMETER: GP_SIZE TYPE I DEFAULT 200. "DATA LENGTH
SELECTION-SCREEN: END OF BLOCK A1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
 MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
 MESSAGE W130(26) WITH TEXT-004.
 SET CURSOR FIELD 'gp_size'.
ENDIF.
* INITIALIZATION
INITIALIZATION.
GV-REPID = SY-REPID.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_MARA_DATA
 TABLES
 GT_TEXT_OUTPUT_LINE
 USING
 S_MATNR[]
 S_MTART[]
 GP_SIZE
 CHANGING
 GV-RETCO
PERFORM GET_MAT_TEXT
 TABLES
 GT_MAKT
 GT_TEXT_OUTPUT_LINE
 GT_THEAD
 GT_LINETAB
 USING
 GC
 GV-RETCO
 CHANGING
 GV_TEXT_OUTPUT_LINE
 GV_MAKT
PERFORM GET_LANG.
PERFORM DYNAMIC_TABLES.
PERFORM POPULATE_FINAL_TABLE.
PERFORM POPULATE_DYNAMIC_TABLE.
* END-OF-SELECTION
END-OF-SELECTION.
PERFORM DATA_OUTPUT.
*& Form get_mara_data
* Materialdaten lesen
* <->ct_gt_text_output_line Ausgabetabelle
* -->it_s_matnr Parameter Materialnummer
* -->it_s_mtart Parameter Materialart
* -->if_gp_size Parameter Anzahl Materialnummern
FORM GET_MARA_DATA TABLES CT_GT_TEXT_OUTPUT_LINE STRUCTURE
 GV_TEXT_OUTPUT_LINE
 USING IT_S_MATNR LIKE S_MATNR[]
 IT_S_MTART LIKE S_MTART[]
 IF_GP_SIZE
 CHANGING IF_GV-RETCO. "#EC *
* MARA in die Übergabestruktur einlesen
SELECT MATNR BEGRU
 FROM MARA UP TO IF_GP_SIZE ROWS
 APPENDING CORRESPONDING FIELDS OF TABLE GT_MATNR
 WHERE MATNR IN IT_S_MATNR
 AND MTART IN IT_S_MTART.
IF_GV-RETCO = SY-SUBRC.
ENDFORM. " get_mara_data
*& Form get_mat_text
* Kurz- und Langtexte zum Material lesen
* <->ct_gt_makt Materialkurztexte
* <->ct_gt_text_output_line Ausgabetabelle
* <->ct_gt_thead Kopftabelle für ALV
* <->ct_gt_linetab Zeilentabelle für ALV
* -->if_gc Globale Konstanten
* <--cf_gv_text_output_line Struktur Ausgabetabelle
* <--cf_gv_makt Struktru Materialkurztexte
FORM GET_MAT_TEXT TABLES CT_GT_MAKT STRUCTURE MAKT
 CT_GT_TEXT_OUTPUT_LINE STRUCTURE
 GV_TEXT_OUTPUT_LINE
 CT_GT_THEAD STRUCTURE THEAD
 CT_GT_LINETAB STRUCTURE TLINE
 USING
 IF_GC LIKE GC
 IF_GV-RETCO
 CHANGING CF_GV_TEXT_OUTPUT_LINE LIKE
 GV_TEXT_OUTPUT_LINE
 CF_GV_MAKT LIKE GV_MAKT
DATA: STRG TYPE STRING,
 STRG1(1255) TYPE C.
IF IF_GV-RETCO = IF_GC-FOUND.
* Materialkurztexte in alles Sprachen einlesen
 SELECT * FROM MAKT APPENDING TABLE CT_GT_MAKT
 FOR ALL ENTRIES IN GT_MATNR "ct_gt_text_output_line
 WHERE MATNR = GT_MATNR-MATNR " ct_gt_text_output_line-matnr
* Kurztexte in die sprachabhängigen Felder bringen
 LOOP AT GT_MATNR INTO WA_GT_MATNR.
 LOOP AT CT_GT_MAKT INTO CF_GV_MAKT
 WHERE MATNR = WA_GT_MATNR-MATNR.
 CF_GV_TEXT_OUTPUT_LINE-MATNR = WA_GT_MATNR-MATNR.
 CF_GV_TEXT_OUTPUT_LINE-BEGRU = WA_GT_MATNR-BEGRU.
 CF_GV_TEXT_OUTPUT_LINE-MAKTX = CF_GV_MAKT-MAKTX.
 CF_GV_TEXT_OUTPUT_LINE-SPRAS = CF_GV_MAKT-SPRAS.
* LANGTEXT
 CLEAR CT_GT_THEAD[].
 CT_GT_THEAD-TDOBJECT = IF_GC-TDOBJECT_MAT.
 CT_GT_THEAD-TDNAME = WA_GT_MATNR-MATNR.
 CT_GT_THEAD-TDID = IF_GC-TDID_GRUN.
 CT_GT_THEAD-TDSPRAS = CF_GV_MAKT-SPRAS.
 CALL FUNCTION 'TEXT_READ'
 EXPORTING
 I_HEADER = CT_GT_THEAD
 I_READONLY = IF_GC-ON
 IMPORTING
 E_HEADER = CT_GT_THEAD
 TABLES
 T_LINES = CT_GT_LINETAB[]
 EXCEPTIONS
 NOTFOUND = 1.
 IF SY-SUBRC = IF_GC-FOUND.
 LOOP AT CT_GT_LINETAB.
 STRG = CT_GT_LINETAB-TDLINE.
 IF STRG1 <> ' '.
 CONCATENATE STRG1 ';' STRG INTO STRG1.
 ELSE.
 STRG1 = STRG.
 ENDIF.
 ENDLOOP.
 CF_GV_TEXT_OUTPUT_LINE-LTXT40 = STRG1.
 APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
 CLEAR CF_GV_TEXT_OUTPUT_LINE.
 STRG1 = ' '.
 ELSE.
 APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
 ENDIF.
 ENDLOOP.
 ENDLOOP.
ENDIF.
ENDFORM. " get_mat_text
*& Form data_output
* Daten mit ALV ausgeben
* <->ct_GT_FIELDCAT Feldkatalog für ALV
* <->ct_gt_text_output_line Ausgabetabelle
* -->P_GS_LAYOUT Layout für ALV
* -->if_gc Globale Konstanten
* <--cf_GV_REPID Zur Zeit aufgerufener Reportname
* <--cf_gv_fieldcat Struktur Feldkatalog
* <--cf_gv Globale Variablen
FORM DATA_OUTPUT.
PERFORM FIELDCATBUILD.
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = GV-REPID
 I_CALLBACK_PF_STATUS_SET = 'EVENT_SET_STATUS_01'
 I_CALLBACK_USER_COMMAND = 'EVENT_USER_COMMAND'
 IS_LAYOUT = L_LT
 IT_FIELDCAT = T_FLDCAT1[]
 TABLES
 T_OUTTAB = <FS_2>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " data_output
*& Form fieldcatbuild
* text
* --> p1 text
* <-- p2 text
FORM FIELDCATBUILD. " TABLES ct_gt_fieldcat_in STRUCTURE gv_fieldcat.
LOOP AT IT_FLDCAT INTO WA_IT_FLDCAT.
 WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
 WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
 WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-FIELDNAME.
 APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
 CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ENDFORM. " fieldcatbuild
* Form event_set_status_01*
FORM EVENT_SET_STATUS_01 USING LT_EXCL TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ABCD' .
ENDFORM. "EVENT_SET_STATUS_01
*& Form Name: event_user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM EVENT_USER_COMMAND USING
IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
 WHEN 'DOWNLOAD'.
 PERFORM POPULATE_DOWNLOAD_TABLE.
 DATA: L_LENGHT TYPE I.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = 'C:data.xls'
 FILETYPE = 'ASC'
 WRITE_FIELD_SEPARATOR = 'X'
 TRUNC_TRAILING_BLANKS = 'X'
 DAT_MODE = 'X'
 IMPORTING
 FILELENGTH = L_LENGHT
 TABLES
 DATA_TAB = <FS_22>.
 IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF L_LENGHT NE GC-FOUND.
 MESSAGE S398(00) WITH 'DATA downloaded to c:data.xls'.
 ENDIF.
ENDCASE.
ENDFORM. "event_user_command
*& Form get_lang
* text
* --> p1 text
* <-- p2 text
FORM GET_LANG.
SELECT SPRAS
 LAISO FROM T002 INTO CORRESPONDING FIELDS OF TABLE GT_LANG
 WHERE SPRAS IN S_LANG.
DESCRIBE TABLE GT_LANG LINES V_LINES.
LOOP AT GT_LANG INTO WA_GT_LANG.
 V = V + 1.
 WA_GT_LANG-SRNO = V.
 MODIFY GT_LANG FROM WA_GT_LANG TRANSPORTING SRNO.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
 CONCATENATE 'MATEDESC-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
 CLEAR WA_IT_FLDCAT.
 WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
 WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-INTLEN = 40.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO IT_FLDCAT .
 CLEAR WA_GT_LANG.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
 CONCATENATE 'BASDAT-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
 CLEAR WA_IT_FLDCAT.
 WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-INTLEN = 255.
 WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO IT_FLDCAT .
 CLEAR WA_GT_LANG.
ENDLOOP.
V_FIELDNAME = 'MATNR'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Matnr'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 1.
V_FIELDNAME = 'BEGRU'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'BEGRU'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 2.
ENDFORM. " get_lang
*& Form dynamic_tables
* text
* --> p1 text
* <-- p2 text
FORM DYNAMIC_TABLES.
ASSIGN LT_DATA TO <FS_DATA>.
* Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA> " Dynamic Internal Table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
* Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
ENDFORM. " dynamic_tables
*& Form populate_final_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_FINAL_TABLE.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 READ TABLE GT_LANG INTO WA_GT_LANG
 WITH KEY SPRAS = GV_TEXT_OUTPUT_LINE-SPRAS.
 IF SY-SUBRC EQ GC-FOUND.
 GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
 ENDIF.
 MODIFY GT_TEXT_OUTPUT_LINE FROM GV_TEXT_OUTPUT_LINE.
ENDLOOP.
ENDFORM. " populate_final_table
*& Form populate_dynamic_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DYNAMIC_TABLE.
DATA: INDX TYPE SY-TABIX.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 AT NEW MATNR.
 INDX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-MATNR.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-BEGRU.
 ENDAT.
 LOOP AT GT_LANG INTO WA_GT_LANG.
 IF GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
 V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + 2.
 ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-MAKTX.
 V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
 ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = GV_TEXT_OUTPUT_LINE-LTXT40.
 ENDIF.
 ENDLOOP.
 AT END OF MATNR.
 APPEND <LWA_LINE_WA> TO <FS_2>.
 CLEAR <LWA_LINE_WA>.
 ENDAT.
ENDLOOP.
ENDFORM. " populate_dynamic_table
*& Form LAYOUT
* text
* --> p1 text
* <-- p2 text
FORM LAYOUT.
CLEAR L_LT.
L_LT-ZEBRA = GC-YES.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = GC-TXT.
ENDFORM. " LAYOUT
*& Form populate_download_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DOWNLOAD_TABLE.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA1> " Dynamic Internal table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
* Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
DATA: STRN1 TYPE STRING,
 STRN2 TYPE STRING,
 INDX TYPE SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-MAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-AUT.
LOOP AT GT_LANG INTO WA_GT_LANG.
 V_VAR1 = WA_GT_LANG-SRNO + 2.
 CONCATENATE 'MATERIALDESCRIPTION-' WA_GT_LANG-LAISO INTO STRN1.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = STRN1.
 V_VAR1 = WA_GT_LANG-SRNO + V_LINES + 2.
 CONCATENATE 'BASICDATA-' WA_GT_LANG-LAISO INTO STRN2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = STRN2.
ENDLOOP.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
APPEND <LWA_LINE_WA1> TO <FS_22>.
V_VAR1 = 0.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
 AT NEW MATNR.
 INDX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-MATNR.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-BEGRU.
 ENDAT.
 LOOP AT GT_LANG INTO WA_GT_LANG.
 IF GV_TEXT_OUTPUT_LINE-SRNO EQ WA_GT_LANG-SRNO.
 V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + 2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = GV_TEXT_OUTPUT_LINE-MAKTX.
 V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
 ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
* STR = GV_TEXT_OUTPUT_LINE-LTXT40.
* SEARCH STR FOR ';'.
* DO.
* IF SY-SUBRC = 0.
* SPLIT STR AT ';' INTO STR1 STR.
* <FA> = STR1.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
* SEARCH STR FOR ';'.
* CLEAR <LWA_LINE_WA1>.
* ELSE.
* EXIT.
* ENDIF.
* ENDDO.
* <FA> = STR.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
 <FA> = GV_TEXT_OUTPUT_LINE-LTXT40.
 ENDIF.
 ENDLOOP.
 AT END OF MATNR.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 CLEAR <LWA_LINE_WA1>.
 ENDAT.
ENDLOOP.
ENDFORM. " populate_download_table
thanks
Nitya

Creating dynamic internal table with deep structure

Hi all,
I need to create an internal table with deep structure dynamically. I've already created tables with method 'create_dynamic_table' but I'm struggling with the deep structure.
I would need an internal table with the following structure:
DATA: BEGIN OF lt_t1,
s1 TYPE REF TO data,
s2 TYPE REF TO data,
END OF lt_t1.
S1 and S2 have to be tables.
It might be possible with RTTS but all the examples in the forums (that I've found so far) are related to at least one DDIC-structure. And that's my problem because both tables are created during runtime.
Thank you in advance
Nicola

Hi Frédéric,
I hope my english is good enough to explain it correctly:
We use a function builder for SEM-BPS which copies data from one Cube to another. This Cube is transactional, so you can't easily read a structure out of DDIC.
The export parameter of this function builder is a table with type 'any table'.
Until today we used a fixed definition e.g.:
TYPES:
    BEGIN OF xtyp_chas,
     /sie/sr_ocomp TYPE /b52/oisr_ocomp,
     /sie/ts_03psp TYPE /b52/oits_03psp,
     0activity     TYPE /bi0/oiactivity,
     0acty_elemt   TYPE /bi0/oiacty_elemt,
     0costelmnt    TYPE /bi0/oicostelmnt,
     0co_area      TYPE /bi0/oico_area,
     0creditor     TYPE /bi0/oicreditor,
     0currency     TYPE /bi0/oicurrency,
     0curtype      TYPE /bi0/oicurtype,
     0db_cr_ind    TYPE /bi0/oidb_cr_ind,
     0fiscper      TYPE /bi0/oifiscper,
     0fiscper3     TYPE /bi0/oifiscper3,
     0fiscyear     TYPE /bi0/oifiscyear,
     0metype       TYPE /bi0/oimetype,
     0network      TYPE /bi0/oinetwork,
     0part_actty   TYPE /bi0/oipart_actty,
     0part_cctr    TYPE /bi0/oipart_cctr,
     0piobjsv      TYPE /bi0/oipiobjsv,
     0project      TYPE /bi0/oiproject,
     0unit         TYPE /bi0/oiunit,
     0vtdetail     TYPE /bi0/oivtdetail,
     0vtstat       TYPE /bi0/oivtstat,
     0vtype        TYPE /bi0/oivtype,
     0bus_area     TYPE /bi0/oibus_area,
     0cashdetail   TYPE /bi0/oicashdetail,
     0cashtype     TYPE /bi0/oicashtype,
     0comp_code    TYPE /bi0/oicomp_code,
     0coorder      TYPE /bi0/oicoorder,
     0cs_dimen     TYPE /bi0/oics_dimen,
     0cs_unit      TYPE /bi0/oics_unit,
     0int_bus      TYPE /bi0/oiint_bus,
     0part_abcpr   TYPE /bi0/oipart_abcpr,
     0part_coord   TYPE /bi0/oipart_coord,
     0part_wbsel   TYPE /bi0/oipart_wbsel,
     0piovalue     TYPE /bi0/oipiovalue,
     0profit_ctr   TYPE /bi0/oiprofit_ctr,
     0ps_obj       TYPE /bi0/oips_obj,
     0statussys0   TYPE /bi0/oistatussys0,
     zfbwheroj     TYPE /bic/oizfbwheroj,
    END   OF xtyp_chas,
    BEGIN OF xtyp_kyfs,
      0amount      TYPE /bi0/oiamount,
      0quantity    TYPE /bi0/oiquantity,
      zf03oaws     TYPE /bic/oizf03oaws,
      zf03oqty     TYPE /bic/oizf03oqty,
      zf03ozsta    TYPE /bic/oizf03ozsta,
    END OF xtyp_kyfs,
    BEGIN OF xtyp_zf03g003,
      s_chas TYPE xtyp_chas,
      s_kyfs TYPE xtyp_kyfs,
    END   OF xtyp_zf03g003,
    xtyp_zf03g003_t TYPE HASHED TABLE OF xtyp_zf03g003
                      WITH UNIQUE KEY s_chas.
DATA: lt_ibm_data TYPE xtyp_zf03g003_t,
      ls_ibm_data TYPE xtyp_zf03g003.
So one table (s_chas) contains the characteristics of the Cube and the other (s_kyfs) contains the keyfigures. That's exactly the format we need for the export parameter. At the end of the program, we use the following coding to fill the export table (eto_chas):
loop at lt_ibm_data into ls_ibm_data.
collect ls_ibm_data-s_chas into eto_chas.
endloop.
So in this moment I give this table the structure that is needed to move the data into the cube. I can't change the requirement because it is a standard interface.
I would like to change that coding to be dynamically. Because if somebody changes a charasteristic or a keyfigure in the cube, we would have to change the function builder too. I don't think that the SEM-BPS department will let us know every time they've changed something anyway.
So I hope that my explanation wasn't too confusing
Nicola

Create dynamic internal table with deep structure;cell coloring dynamic ALV

Hi,
My requirement is to do cell colouring for a dynamic ALV.
So I am creating a dynamic internal table using the following method.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_fieldcatalog[]
    IMPORTING
      ep_table        = i_output.
But how do I define field COLORS which should be again an internal table ?
Is there any other way for cell colouring?
Putting my problem in another way:
How do I create a dynamic internal table with one field as another internal table.
Quick replies are highly appreciated.
Thanks,
Nisha Vengal.

halo Nisha
Before building the display table . you can add the field in the feild catalog right . This display table gets generated from the field catalog right
1 Create a global structute say ZEXTEND_FIELDCAT
2 Have fields like STYLE type lvc_t_styl
                         COLOR type LVC_T_SCOL.
3 Now you have to extend ur fieldcatalog
l_fieldcat-fieldname = COLOR'.
l_fieldcat-ref_field = 'COLOR'.
l_fieldcat-ref_table = 'ZEXTEND_FIELDCAT'.
APPEND l_fieldcat TO lt_field_catalog.
CLEAR l_fieldcat.

How to create a data connection with dynamic XML file?

Thanks for all reply first!
I have formatted the submitted data into an XML file on the server side,this file can be import to PDF form correctly.
I try to send this XML file to the user to let him can review what he has submitted.
I guess that I should create a data connection to the XML file so that it can be reviewed by the user.
But the question is that the XML file is dynamic generated.
How can i do?
give me some clus or examples,please.
thanks,
Jasper.

Hi Jasper,
To show user back the result, you can use PDF instead of XML. You can store the PDF template in server and you can merge XML data with PDF template by Livecycle Form Data Integration service.
We, as KGC, can generate huge number of Adobe Livecycle forms in small periods. Also we give consultancy on Adobe Livecycle ES products and Adobe Livecyle Designer. In case of any need, do not hesitate to contact us.
Asiye Günaydın
Project Consultant
KGC Consulting Co.
www.kgc.com.tr

Create dynamic internal table with dynamic structure

I have an internal table itab1 that have 12 amount fields from period1 thru period12. I need to create a dynamic table with dynamic structure for the period column if the total amount of each column is > 0. Any idea on how to do that?
For example if my itab1 has 20 rows and the sum of period1 = 35, sum of period2 = 0, sum of period3 = 5, sum of period4 =0, sum of period5 = 2 then I need to create a dynamic structure for the field column that have the total > 0, i.e structure struct1 have field period1, period3 and period5 only. Then I will need to load the data to itab2 from itab1. Can someone help.
Thanks. I am on 4.7 and will upgrade to ERP 6.0 soon.

go throgh this....
REPORT yusmm_text1 NO STANDARD PAGE HEADING
 LINE-SIZE 199.
T A B L E S
TABLES: MARA,
 MAKT,
 THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
 GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 MAKTX TYPE MAKT-MAKTX,
 SPRAS TYPE MAKT-SPRAS,
 LTXT(2000) TYPE C ,
 SRNO TYPE N ,
 END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
 SPRAS TYPE T002-SPRAS,
 LAISO TYPE T002-LAISO,
 SRNO TYPE N ,
 END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
 MATNR TYPE MARA-MATNR,
 BEGRU TYPE MARA-BEGRU,
 MTART TYPE MARA-MTART,
 SPRAS TYPE MAKT-SPRAS,
 MAKTX TYPE MAKT-MAKTX,
 END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
 matnr TYPE mara-matnr,
 END OF tp_matnr.
 GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
 gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
 gv_lit TYPE I,
 gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
 gv_li1(3) TYPE N,
 g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
 GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
 T_NEWLINE TYPE REF TO DATA,
 T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
 T_FLDCAT TYPE LVC_T_FCAT,
 WA_IT_FLDCAT TYPE LVC_S_FCAT,
 WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
 WA_COLNO(2) TYPE N,
 WA_FLNAME(5) TYPE C,
 L_LT TYPE SLIS_LAYOUT_ALV.
 GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
 WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
 WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
 WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
 WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
 INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
 INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
 "tablename
 <FS_DYNTABLE>, "Field symbol to create work area
 <FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
 <FS_DATA1> TYPE REF TO DATA,
 <FS_2> TYPE STANDARD TABLE,
 <FS_22> TYPE STANDARD TABLE,
 <FS_1>,
 <FS_11>,
 <F>,
 <FA>,
 <LWA_LINE_WA>,
 <LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
 LT_DATA1 TYPE REF TO DATA,
 LWA_LINE TYPE REF TO DATA,
 LWA_LINE1 TYPE REF TO DATA,
 LI_FIELD_CAT TYPE LVC_T_FCAT,
 LWA_FIELD_CAT TYPE LVC_S_FCAT.
 PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
 OBLIGATORY ,
 S_MATNR FOR MARA-MATNR,
 S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
 INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
 MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
 MESSAGE W130(26) WITH TEXT-004.
 SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Material Number'.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'Authorization Group'.
 g_VAR11 = wg_final-srno + 2.
 gv_li1 = gv_li1 + 2.
 MOVE : g_var11 TO gv_i1.
 ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'MatDesc'.
 g_var2 = g_var11 + gv_lines.
 ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = 'BasicData'.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 EXIT.
 ENDLOOP.
LOOP AT ig_final INTO wg_final.
 AT NEW matnr.
 gv_index = sy-tabix.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-matnr.
 ENDAT.
 AT NEW MATNR.
 GV_INDEX = SY-TABIX.
 ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-matnr.
 ENDAT.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-begru.
 ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-begru.
 gv_var = wg_final-srno + 2.
 gv_li = gv_li + 2.
 MOVE : gv_var TO gv_i.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-maktx.
 ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-maktx.
 gv_var1 = gv_var + gv_lines .
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
 <F> = wg_final-ltxt.
 ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
 <FA> = wg_final-ltxt.
 AT END OF matnr.
 APPEND <LWA_LINE_WA> TO <FS_2>.
 CLEAR <LWA_LINE_WA>.
 ENDAT.
 AT END OF matnr.
 APPEND <LWA_LINE_WA1> TO <FS_22>.
 CLEAR <LWA_LINE_WA1>.
 ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
 text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
 from mara up to gp_size rows
 appending corresponding fields of table ig_matnr
 where matnr in s_matnr
 and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
 MARA~BEGRU
 MARA~MTART
 MAKT~SPRAS
 MAKT~MAKTX FROM MARA INNER JOIN MAKT
 ON MARAMATNR = MAKTMATNR
 appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
 WHERE makt~spras IN s_spras
 AND mara~matnr IN s_matnr
 AND mara~mtart IN s_mtart
 AND mara~matnr EQ ig_matnr-matnr.
 endloop.
IF sy-subrc = 0.
 SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
 text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
 wg_final-MATNR = wg_mara_makt-MATNR.
 wg_final-BEGRU = wg_mara_makt-BEGRU.
 wg_final-MTART = wg_mara_makt-MTART.
 wg_final-SPRAS = wg_mara_makt-SPRAS.
 wg_final-MAKTX = wg_mara_makt-MAKTX.
 READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
 IF sy-subrc = 0.
 wg_final-srno = wg_t002-srno.
 ENDIF.
 CLEAR ig_thead[].
 ig_thead-TDOBJECT = 'MATERIAL'.
 ig_thead-TDNAME = wg_final-matnr.
 ig_thead-TDID = 'GRUN'.
 ig_thead-TDSPRAS = wg_final-spras.
 CALL FUNCTION 'TEXT_READ'
 EXPORTING
 I_HEADER = IG_THEAD
 I_READONLY = 'X'
 IMPORTING
 E_HEADER = IG_THEAD
 TABLES
 T_LINES = IG_TLINE[]
 EXCEPTIONS
 NOTFOUND = 1.
 IF sy-subrc EQ 0.
 LOOP AT ig_tline.
 gv_strg = ig_tline-tdline.
 IF gv_strg1 <> ' '.
 CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
 ELSE.
 gv_strg1 = gv_strg.
 ENDIF.
 ENDLOOP.
 wg_final-ltxt = gv_strg1.
 APPEND wg_final TO ig_final.
 CLEAR wg_final.
 gv_strg1 = ' '.
 ELSE.
 APPEND wg_final TO ig_final.
 ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
 text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
 text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
 LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
 WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
 g_v = g_v + 1.
 Wg_t002-srno = g_v.
 MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'MD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
 CLEAR WA_IT_FLDCAT.
 MOVE SY-INDEX TO WA_COLNO.
 CONCATENATE 'BD-' wg_t002-LAISO
 WA_COLNO
 INTO WA_FLNAME.
 WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
 WA_IT_FLDCAT-DATATYPE = 'CHAR'.
 WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
 WA_IT_FLDCAT-INTLEN = 250.
 WA_IT_FLDCAT-TABNAME = '<FS_2>'.
 APPEND WA_IT_FLDCAT TO T_FLDCAT.
 CLEAR wg_t002.
 ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA> " Dynamic Internal Table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
 WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
 WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
 WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
 WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
 APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
 CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
 IMPORTING
 EP_TABLE = <FS_DATA1> " Dynamic Internal table
 EXCEPTIONS
 GENERATE_SUBPOOL_DIR_FULL = 1
 OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
 text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = GV_REPID
 I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = L_LT
 IT_FIELDCAT = T_FLDCAT1[]
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = <FS_2>
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
 IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
 WHEN 'DOWNLOAD'.
 CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
 TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 BIN_FILESIZE =
 FILENAME = 'C:\Material-Text.xls'
 FILETYPE = 'ASC'
 APPEND = ' '
 WRITE_FIELD_SEPARATOR = 'X'
 HEADER = '00'
 TRUNC_TRAILING_BLANKS = 'X'
 WRITE_LF = 'X'
 COL_SELECT = ' '
 COL_SELECT_MASK = ' '
 DAT_MODE = 'X'
 IMPORTING
 FILELENGTH = GL_LENGHT
 TABLES
 DATA_TAB = <FS_22>
EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 IF GL_LENGHT NE 0.
 MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
 ENDIF.
ENDCASE.
ENDFORM. "user_command
Thanks

How to Create a Temporary Table with SQL Server

I know you can create a temporary table in SQL Server 2000, but not quite sure how to do it in CFMX 7, i.e., does the SQL go inside a <CFQUERY dbtype="query"> tag?
I'm pulling the main set of records from an Oracle server (1st data source), but it does not contain employee names, only employee IDs. Since I need to show the employee name along with the Emp ID, I'm then pulling a list of "current" employee names from a SQL Server (2nd data source), which is the main database on our CF server.
I've got a QofQ that works fine, except it only matches EmpIDs that exist in both result sets. Employees who are no longer employed, don't match, and don't display. Since I can't do a LEFT OUTER JOIN with a QofQ, what I need to do is get the records from the Oracle server into the SQL Server. Preferably in a temporary table.
I was hoping if I could get those Oracle records written to a temp table on the main SQL Server, in same database as the Employee Name table, I could then write a normal <CFQUERY> that uses a LEFT OUTER JOIN.
I think I could probably write a Stored Procedure that would execute the SQL to create the temporary table, but am trying to avoid having to write the SP, and do it the simplest way.
This query will be a program that can be run hundreds of times per day, with a form that allows users to select date ranges, locations, and other options. That starts the queries, which creates the report. So I just need the temp table to exist only until all the SQL has run, and the <CFOUTPUT> has generated a report.
If the premise is right, I just need some help with the syntax for creating a SQL Server temp table, when you want to write records to it from an external data source. I'm trying the following, but getting an error:
<CFQUERY name="ITE_Temp" datasource="SkynetSQL">
CREATE TABLE #MyTemp
( INSERT INTO #MyTemp
ITE2.TrueFile char (7) NOT NULL,
ITE2.CountOfEmployee int NULL,
ITE2.DTL_SUBTOT decimal NULL,
ITE2.EMPTYPE char (3) NULL,
ITE2.ARPT_CD char (3) NULL
</CFQUERY>
So I actually created a permanent table on the SQL Server, and wrote the below SQL, which does work, and does write the records to table. I can then write another CFQUERY with a LEFT OUTER JOIN, and get all the records, including those that don't have matching employee name:
<CFQUERY datasource="SkynetSQL">
<CFLOOP index="i" from="1" to = "#ITE2.RecordCount#">
INSERT INTO ITE_Temp
 (FullFile,
 EmployeeCount,
 DTL_Amount,
 EmployeeType,
 station)
VALUES ('#ITE2.TrueFile[i]#',
 #ITE2.CountOfEmployee[i]#,
 #ITE2.DTL_SUBTOT[i]#,
 '#ITE2.EMPTYPE[i]#',
 '#ITE2.ARPT_CD[i]#')
</CFLOOP>
</CFQUERY>
But, I hate to have to create a table and physically write to it. For one, it seems slower, and doing it in temp would be in memory, and probably much faster, correct? Is there some way to code the above, so that it does something similar, but in a TEMPORARY TABLE? If I can figure out how to do this, I can pull data from multiple data sources and servers, and using SQL Server temp tables, work with the data as if it was all on the same SQL Server, and do some cool reports.
Everything I've done for the past few years, has all been from data from a single source, whether SQL Server, or another server. Now I need to start writing reports where data can come from 3 or 4 different servers, and be able to do joins (inner and outer). Thanks for any advice/help. Much appreciated.
Gary

While waiting to hear back, I was able to write the query results from an outside Oracle server, to a table on the local SQL Server, and do the LEFT OUTER JOIN required for the final query and report to work. That was with this syntax:
<CFQUERY name="AddTableRecords" datasource="MyTable">
TRUNCATE TABLE ITE_Temp
<CFOUTPUT query="ITE2">
INSERT INTO ITE_Temp
(FullFile,EmployeeCount,DTL_Amount,EmployeeType,station)
VALUES
('#TrueFile#', #CountOfEmployee#, #DTL_SUBTOT#, '#EMPTYPE#', '#ARPT_CD#')
</CFOUTPUT>
</CFQUERY>
However, I was not able to write to a temporary table AND read the results. I got the syntax to run to write the above results to a temporary table. But when I tried to read and output the results from the temp table, I got an error. Also, it wouldn't take the single "#" (local) only the global "##" table var, using this syntax. Note that if I didn't have the DROP TABLE in the beginning, the 2nd time you run this query, you get an error telling you the table already exists.
<CFQUERY name="ITE_Temp2" datasource="MyTable">
DROP TABLE ##MyTemp2
CREATE TABLE ##MyTemp2
FullFile char (7) NOT NULL,
EmployeeCount int NULL,
DTL_Amount decimal NULL,
EmployeeType char (3) NULL,
station char (3) NULL
<CFOUTPUT query="ITE2">
INSERT INTO ##MyTemp2 VALUES
'#ITE2.TrueFile#',
#ITE2.CountOfEmployee#,
#ITE2.DTL_SUBTOT#,
'#ITE2.EMPTYPE#',
'#ITE2.ARPT_CD#'
</CFOUTPUT>
</CFQUERY>
So even though the above works, I could use some help in reading/writing the output. I've tried several things similar to below, but they don't work. It't telling me ITE_Temp2 does not exist. It's not easy to find good examples of creating temporary tables in SQL Server.
<CFQUERY name="QueryTest2" datasource="SkynetSQL">
SELECT *
FROM ITE_Temp2
</CFQUERY>
<CFOUTPUT query="ITE_Temp2">
Output from Temp Table 
FullFile: #FullFile#, EmployeeCount: #EmployeeCount#
</CFOUTPUT>
Thanks for any help/advice.
Gary.

How to create Dynamic Internal table in ALV?

Hi all,
I have to create a ALV report based on dynamic internal table. The requirement is that when I enter the months in my selection screen I should get the data relevant to those many months only. For eg if in selection I have given January to March, I should get an ALV output with columns from January to March only.
Please help me with the coding part as I find it a bit confusing.
Please reply immediately.
Regards,
Bhavani.

Hi BHAVANI,
first you have to prapare a field catalog [(see this)|http://help.sap.com/saphelp_470/helpdata/en/52/5f060de02d11d2b47d006094192fe3/frameset.htm]
and than you can use a Method cl_alv_table_create=>create_dynamic_table
I hope that help a little.
Regards Bogdan

How to create an internal table with fields from different sources

Hi.
I need to create an internal table where some of the fields are from a database table, and the other fields are user specified. How do i do that?
Example:
DB table ZTAB with fields ZTAB-FIELD1, ZTAB-FIELD2.
I want to create an internal table ITAB with the fields ZTAB-FIELD1, ZTAB-FIELD2 from ZTAB. In addition, I also want to have one more field RECORD_NO, which is not from ZTAB. How do I do it? Could I do something like below?
DATA BEGIN OF ITAB.
        INCLUDE STRUCTURE ZTAB.
DATA RECORD_NO TYPE I.
DATA END OF UPLINE.
Or, are there more efficient way of doing it? Thanks.

hi KIan,
go:
general type
TYPE : BEGIN OF ty_itab,
           field1 TYPE ztab-field1,
           field2 TYPE ztab-field2,
*your own fields here:
           field TYPE i,
           field(30) TYPE c,
           END OF ty_itab.
work area
DATA : gw_itab TYPE ty_itab.
internal table
DATA : gt_itab TYPE TABLE OF ty_itab.
hope this helps
ec

How to create dynamic data tables with ADF 10g

Similar Messages

Maybe you are looking for