How to create ECO 5.0 CRM project in NWDS?

hi,
I created a development track in NWDI and next I want to create a project in NWDS.
So I switched to the inactive DCs view in NWDS and I choosed the SAP_SHRWEB_1 DC and selected the entry crm/isa/web/b2b and created a project. But I cant find the project in the NWDS workspace.
I dont know whats going wrong because I already went this way for ECO for R/3 several times.
kind regards
Michael

hi,
the problem was caused by using a eclipse workspace which I already used in combination with a different NWDI.
Michael

Similar Messages

  • How to create a new Oracle OSB project automaticaly with script without IDE

    Hello,
    I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
    I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
    I'm using Oracle service bus 10.3.1
    Thank you for your help.

    Thank you for your response,
    I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
    Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
    The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
    So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
    So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
    I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
    I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
    Regards,
    Tarik

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

  • How to create an appointment in crm webui?

    hello experts!
    i'm verymuch new to crm webui. would anybody please let me know how to create an appointment in crm web ui. even though i established a account and contact relationship in t-code BP in GUI. The error still pops up asking me to enter Sales organization,distribution channel and division.
    regards
    sanguine

    You can follow chapter "3.1 Maintaining Organizational Data Profile" from best practices' building block ['C23: CRM Basic Sales'|http://help.sap.com/bp_crm70/BBLibrary/HTML/C23_EN_DE.htm]. For "Organizational Model Determin. Rule" instead of a rule 10000166 enter 10000194. It will determine org. data from current user.
    Also take a look in near settings. There you can define your own rule.
    Or check this thread Org Unit determination based on Emp Resp in Task which describes how to create profile for employee responsible.

  • How to create trial  version in oracle project

    assalamualikum and hi ..
    sir how to create trial version in oracle project
    i want to
    anyone use my oracle (forms) project for some limited time..
    and then expire after some time..

    ummm...you test it using the UTL_FILE package.
    BTW...you can also spool text files out of SQL*Plus on your local machine, without even needing UTL_FILE. but if you need to create files on a server, then UTL_FILE is the way to go.

  • How to create Campaign ID in CRM.

    Hi Experts,
    How to create Campaign ID in CRM.
    :Please provide me any documents for the same.
    Thanks & advance
    Prajith P

    Accorring to your question, you want to create campaign in CRM?
    you need to assign a MKT_PRO or other Marketing related role to your WEB UI user, then login the WEB UI, from the menu you will find marketing plan, and campaign is a kind of marketing object under it.

  • How to create / Insert Leads in CRM On Demand using WSDL in Bpel

    Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
    Getting following Error
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
    </part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
    </part><part name="detail"><detail>&lt;detail>
    &lt;siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log&lt;/siebelf:logfilename>
    &lt;siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)&lt;/siebelf:errorcode>
    &lt;siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
    &lt;siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)&lt;/siebelf:errormsg>
    &lt;/siebelf:error>
    &lt;/siebelf:errorstack>
    &lt;/siebelf:siebdetail>
    &lt;/detail>
    </detail>
    </part></remoteFault>

    Could any one suggest how to create/insert leads in CRM On Demand through Bpel.
    Getting following Error
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>Server</code>
    </part><part name="summary"><summary>Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)</summary>
    </part><part name="detail"><detail>&lt;detail>
    &lt;siebelf:siebdetail xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:logfilename xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">siebel.log&lt;/siebelf:logfilename>
    &lt;siebelf:errorstack xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:error xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
    &lt;siebelf:errorcode xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">(SBL-EAI-04421)&lt;/siebelf:errorcode>
    &lt;siebelf:errorsymbol xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"/>
    &lt;siebelf:errormsg xmlns:siebelf="http://www.siebel.com/ws/fault" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">Cannot perform NewRecord on the business component 'Lead'(SBL-EAI-04421)&lt;/siebelf:errormsg>
    &lt;/siebelf:error>
    &lt;/siebelf:errorstack>
    &lt;/siebelf:siebdetail>
    &lt;/detail>
    </detail>
    </part></remoteFault>

  • How to create SLD after Netweaver/CRM installation

    Hi guru,
    I installed CRM that's on top of Netweaver without having SLD created. Now I need to configure TREX that requires SLD on the CRM side. How To create SLD after Netweaver/CRM has been installed?
    Many Thanks!

    Thank you Sergo! The document is very helpful.
    System Landscape Directory (SLD)
    Readers, if you click on the url, you may get access error. To solve the problem, copy and paste the url in a new browser window.
    The according Netweaver "Post-Installation Guide - SLD of SAP NetWeaver" is the one containing the answers. Pick the version that matches your NW installation.

  • How to create a copy of a project

    We are using RoboHelp HTML version X5, and we use version
    control. We are trying to figure out how to create a copy of a
    project so we can edit the new version with the old version
    remaining intact. That way we could have multiple versions of our
    help system, a distinct version for each software release we have.
    Thanks.

    The way I do it is rather simple.
    1.       Copy the local RoboHelp project to a new location.
    2.       Remove the link to source control. (See http://www.robowizard.com/RoboWizard/MonthlyScry/102004.htm on how to do this without opening RoboHelp. Please follow these instructions.)
    3.       Open the RoboHelp project and add it to source control as a new project.
    By creating a copy of the entire project directory, ALL the content is retained.
    Greet,
    Willam

  • How to creat Action Profiles in CRM

    Hello Experts,
    Can any one guide me how to create Action Profiles in CRM for attaching the smartform ????
    Regards,
    Amol Tambe.
    SAP CRM Technical Consultant.

    TR: SPRO --> IMG -->Customer Relationship Management -->Basic Functions -->Actions -->Actions in Transaction >Change Actions and Conditions>Define Action Profiles and Actions
    Best Regards,
    Vishant

  • How to create custom component in CRM 2007

    Hi.
    I am new for the CRM 2007 Web UI.
    Here we have CRM_UI_FRAME.
    Like this so many Components are there.
    I want how to create our own component.
    I created it as follows.
    Open the Transaction code bsp_wd_cmpwb.
    Provide Z Name in the Component.
    Zcomponent
    Press Create button.
    Go to Run Time Repository.
    Press Change Mode.
    Create a MODEL as ALL.
    GO to Browser Component Structre.
    Select View.
    Provide View name.
    Create the View.
    Go to view Layout.
    Provide the code like this.
    <%@page language="abap"%>
    <%@ extension name="htmlb" prefix="htmlb"%>
    <%@ extension name="xhtmlb" prefix="xhtmlb"%>
    <%@ extension name="crm_bsp_ic" prefix="crmic"%>
    <%@ extension name="bsp" prefix="bsp"%>
    <cthmlb:overviewFormConfig/>
    Create the context under the context.
    Go to Configuration tab.
    Assigne the Attributes to the Screen.
    GO to the Run Time Repository.
    press change mode.
    Assigne the view name to the Window.
    Save it.
    Test the Componet. But it is not diaply anything on the screen.
    How i will get the data into the web UI.
    Can anybody expalin about this one to me with screen shorts if possible.
    I want add some fields into the web UI. Provide some values into that. Capture the values.
    Navigate the data from one screen to another screen. How it is possible. I did not understand. 
    If i am changing any screens in the pre define component it shows dump.
    So, now i need Custom component with adding of the fields.
    Please give me proper information regarding this one.
    Thank You.
    Krishna. B.

    Hi,
    Try put the htmlb to show a field:
    <thtmlb:label design="LABEL" for="//<context>/<field>" text="<field>"/>
    <thtmlb:inputField  id="<field>" maxlength="31" size="20" value="//<context>/<field>"/>
    In order to get value, you can write a simple code in the event_handler:
    LR_BOL                      type ref to IF_BOL_BO_PROPERTY_ACCESS
    LR_BOL = ME->TYPED_CONTEXT-><context>->COLLECTION_WRAPPER->get_current()
    var1 = LR_BOL->GET_PROPERTY_AS_STRING('FIELD').
    take a look at lr_bol methods so that you can see the set and get methods.
    Regards,
    Renato.

  • How to create custom report in crm 2013

    Hi,
    I want to create custom report in crm 2013. I want to show Contact information in report. My scenario is that when I select multiple record and run report then contact information show in different pages. I want to show record in textbox in report. Here
    is an example of display record

    Hi Aamir,
    Have a look at below link it shows step by step how to create custom SSRS report.
    http://www.njevity.com/blog/creating-dynamics-crm-2011-reports-sql-reporting-services-pre-filtering-and-default-filters
    It tells using fetchxml, you can use SQL query as well. You need to use pre filtering to run report on selected record.
    Thanks,
    Prasad
    Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

  • How to create an IOBJECT in CRM

    Hi CRM gurus,
    I want to create an IOBJECT from the following data:
    OBJECT FAMILY
    EXTERNAL ID,
    REFERENCE PRODUCT
    PRODUCT DESC
    STATUS is 'At customer site'
    Counter Template
    Please suggest me is there any suitable BAPI/FM available in SAP CRM?
    Thanks in Advance.
    Regards,
    Deep

    You can follow chapter "3.1 Maintaining Organizational Data Profile" from best practices' building block ['C23: CRM Basic Sales'|http://help.sap.com/bp_crm70/BBLibrary/HTML/C23_EN_DE.htm]. For "Organizational Model Determin. Rule" instead of a rule 10000166 enter 10000194. It will determine org. data from current user.
    Also take a look in near settings. There you can define your own rule.
    Or check this thread Org Unit determination based on Emp Resp in Task which describes how to create profile for employee responsible.

  • How to create ZPS Report showing specific Project details?

    Hi,
    How do I create a custom  ZPS report which shows Project details and progress The requirements are to see 20 fields in one single report . The fields which  to be seen in the report are Labor Cost, Material Cost,Labor hrs,finish dates, billing plan, Milestones, NWA,Responsible person,Work Center,Warranty information all in one report.
    Please advise how to create such a report.
    Thanks much!

    you can use
    ABAP
    Query
    Report Painter / Writer
    to create your won reports
    The choice will depend on what exactly you want

  • How to create service order in CRM

    Hi All,
    Now I can create a service plan. I want to know how to create a service order in CRM. Then I can get service plan from solution manager side for testing. Could anyone tell me how to do that on system ICT/ICP?
    Thanks a lot.

    Hi Vincent,
    If you are only talking about creating of service orders in SAP CRM, you can follow this path: [Create Service Orders|http://help.sap.com/saphelp_crm60/helpdata/en/1a/c697d376f24869a755dcf83bbbc9d2/frameset.htm]. This will tell you the overall process along with the items which are necessary to create service orders.
    [Service Orders|http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm] will also give you a very comprehensive overview on Service Orders and its creation.
    But I'm still not clear with the system details that you mentioned here. What is ICT/ICP? And what kind of Service Plan data are you expecting from Solution Manager? Is this a SAP CRM Setup for a Demo or are you show casing this solution for some mid-sized clients or customers?
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for

  • How to update Adobe Reader 10.1.1 via GPO

    Hi, I have a GPO for installation of 10.1.0 and it's working correctly, but now, I need to update the SW to 10.1.1 version. I couldn't locate the msi file for this version, how can I update the SW through GPO? Thanks in advance, Regards,

  • File is getting picked up by Communication channel but not processed by XI

    Hi, I have a File to File scenario. The input csv file is getting picked by the sender communication channel but its not being processed by XI and thats why no entry is coming in sxmb_moni. Then I think the message might getting stucked in the inboun

  • System Restore - and everything goes kaput...

    Hey guys, I recently got my computer repaired, with a hard drive replacement. Of course, this means I don't have purchased music on the computer anymore. HOWEVER, I do have it on my iPod. Now, I have disk usage enabled, but greyed out in the summary

  • Subcontracting material issues

    Dear Experts Let me know wether is there any transaction code that would give me the material that is provided to the vendor with reference purchase order specifying the requirement qty and issued qty. Eg: PO    material    Required qty     withdrawl

  • Pre-ordering through apple site  or vzw

    I have been seeing a lot of people say that they will be pre-ordering through apples site..however, I thought the pre-orders were only through vzw. Does anyone know for sure...Its about the only thing I am not sure of, that matters to me. If you can