How to create / edit a website using SharePoint Designer 2013

How to EDIT a website created by Frontpage using SharePoint Designer 2013 ?
How to CREATE a new website using SharePoint Designer 2013 ?

You can edit any sharepoint site using designer not any other site.
To create a new website using designer follow below:
To create a new site, click the File tab, choose Sites, and perform one of the following:
Click New Blank Web Site to create a blank, empty SharePoint site.
Click Add Subsite to My Site to create a new site under your My Site.
Under Site Templates select a template to create a new site based on a SharePoint template.
http://office.microsoft.com/en-in/sharepoint-designer-help/get-started-with-sharepoint-designer-2010-HA010370548.aspx#BMopensites

Similar Messages

  • Issue with inserting edit item form using sharepoint designer 2013

    Hi,
    I inserted an edit form of a custom list in a site page using sharepoint designer-2013. But it is giving error "no item exists". 
    I am using default ListItemId Parameter with ID query string and I passed the query string parameter to that page. But still the result is same. But if I give any default value, page is displaying fine for that specific item although I dont pass any querystring
    to the page URL.
    Can you please guide me?
    Thanks in advance.
    Regards,
    Chaitanya

    Hi,
    From your description, I know you get issue when you add “edit form” of custom list to a page.
    I tried to reproduce your issue, and if I added “edit form” to page without “Advanced Mode”.
    I add “edit form” to page with steps below:
    Right click the page, click “Edit File in Advanced Mode”.
    Find source with keywords [ContentPlaceHolderId="PlaceHolderMain"].
    Choose INSERT tab in the Ribbon.
    Click “Edit Item Form”, and choose the custom list that you want to add.
    Save file, and go to the page.
    The screenshot below is my result:
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How do I apply conditional formatting using SharePoint Designer 2013?

    I'm attempting to apply Conditional Formatting to a list view web part via SharePoint Designer 2013, and I can't seem to find the option to do so.
    I've a horrible feeling I'm just being daft, but here's what I've done so far:
    - Created a new page (I've tried both web part and wiki)
    - Added a list "App part" and saved the page
    - Checked-out and opened the page via Designer
    - Clicked the "Edit file" option
    - Selected the XsltListViewWebPart tag
    So far I can't find any options to add it. If I open the Conditional Formatting pane via the View menu it tells me the following:
    > To use conditional formatting, select an HTML tag, data value, or
    > range of text, and then click Create to specify formatting options.
    I've tried selecting the web part tags in all manner of combinations with no luck. In previous version I would have simply selected the previewed data rows in the now-absent Preview pane.
    Am I missing something?

    Create and edit a Wiki Page
    Click Inset > Data View and Select “Empty Data View”
    Click Inside the <DataSources> tags </DataSources>
    Click Insert > Data Source “Your Data Source Name”
    Hold down Ctrl button and select the Rows in the order you want them to appear from your “Data Source Details” Window.
    After the Rows are selected click on the drop down “Insert Selected Fields as…” at the top of the “Data Source Details” Window. 
    Select “Multiple Item View” option (This will create the xsl where we need to add the conditional formatting to)
    Find the <tr> tag that contains the Row Data.  Insert the following right below the <tr> tag:
    <xsl:attribute name="style">
    <xsl:if test="@FieldName = 'Something'">background-color: #FF0000;</xsl:if>
    </xsl:attribute>
    I hope this helps.  I figured this out by using the old 2010 Designer to figure out the where to place the code and how to do this.

  • Send Edit Items URL in E-Mail Using Sharepoint Designer 2013 WorkFlow

    Hi,
    I want to Send the URL of Edit Item List using SharePoint Designer 2013 Workflow
    I m Using [%Task : URL%] Then it return the internal URL -- 
    http://SP2013/Sites/MySites/HelloSites/Lists/Tasks/DispForm.aspx?ID=359&ContentTypeId=0x0108003365C4474CAE8C42BCE396314E88E51F
    But i want in  AAP URL for edit list items  such as 
    http://Hello.com/Sites/MySites/HelloSites/Lists/Tasks/DispForm.aspx?ID=359&ContentTypeId=0x0108003365C4474CAE8C42BCE396314E88E51F
    Any one can suggest me please.
    Thanks 
    Rajesh

    Hi, 
    I'm assuming you made your site as internet site (public facing).
    In that case you might site desired output. If not you can think of replacing text
    i.e SP2013 = hello.com
    Thanks,
    Vivek
    Please vote or mark your question answered, if my reply helps you

  • Workflow created using sharepoint designer 2013 is not getting started and the initiator is Anonymous.

    Hi All,
    I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
    When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
    Looking forward for your help.
    Thanks in Advance.
    Sunitha

    Below is the solution.
    Solution:.
    check
    list in workflow manager server  :
    1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
    ”WorkflowMgmtPool” is started 3. Following services are running
    Workflow Manager Backend
    Service Bus Message Broker
    Service Bus Gateway
    Windows Fabric Host Service (FabricHostSvc)
    4. Get workflow farm information , workflow database  by  Start Workflow
    Manager PowerShell     get-WFfarm   5. Check if the Workflow Manager farm running(workflow service backend and  front end         should be rennin)  by  Start Workflow Manager
    PowerShell    get-WFfarmStatus
    6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
    7. Restart the WorkflowServiceBackend service
    net stop WorkflowServiceBackend
    net start WorkflowServiceBackend
    Reference Link
    http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
    Thanks all.
    Sunitha

  • Unable to edit the site in sharepoint designer 2013

    Hi,
    I have created a custom list for one of my requirement, and I want to change the look and feel of the custom list view, so I was trying to edit this list in SharePoint Designer 2013, I'm able to open the list in SPD 2013, but unable to edit anything since
    I'm getting the "This page does not contain any regions that you have permission to edit." error.
    It will highly appreciated if anyone help in resolving the issue.
    Thanks in advance.
    Anil

    Anil,
    Below links will help you. Please use them.
    SharePoint
    Designer 2013 – How to modify List View web part filters and parameters
    Create
    a custom list view using SharePoint Designer
    Share point list view custmization
    in sharepoint 2013
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Item level permission on workflow task List using sharepoint designer 2013

    Hello All,
    I have created a custom approval workflow. Workflow create a Task in Tasks List.  Now suppose A task is assign to user1. 
    User2 should not able to edit\approve\reject the item.
    How to give item level permission using SharePoint designer in SharePoint 2013 workflow.
    SharePoint 2013 workflow doesn't have impersonation steps also.
    Please suggest how to give permission on task list based on assigned To field.

    In order to change permissions on a list item you'd need a sharepoint 2010 workflow according to http://msdn.microsoft.com/en-us/library/jj728659.aspx
    Unfortunately this functionality is not available in SharePoint 2013 workflows :-(
    The impersonation step still exists, but it is now called "App Step" in the SharePoint Designer 2013 Ribbon. This step is disabled, though, until you activate a web site feature called "Workflows can use app permissions"

  • Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

    using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

    Hi,
    Based on your description, I have done a test and I can’t reproduce your issue.
    I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
    I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
    Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
    1. Use SharePoint Designer to open another site and check whether it is successful.
    2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
    3. Perform the connection procedure under another environment and verify whether the issue is resolved.
    If the issue persists, can you provide related screenshots for further troubleshooting?
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Cannot see the Previous Versions using SharePoint Designer 2013 - Versions cannot be accessed at this time.

    I was trying to view the Version History of a page from the SharePoint Designer 2013, I got the following error. "Versions cannot be accessed at this time, because the server is busy. Please try again later.
    Whereas I can able to access the version history through browser, the issue only occurs in SharePoint Designer.
    Thanks
    Ramkumar

    Hi Ramkumar,
    I understand that when you use SharePoint designer 2013 to check previous version of a page, it will pop up the error window. This is a known issue and here are two feasible workaround:
    1.Use SharePoint designer 2010 to connect SharePoint 2013 site.
    2.In SharePoint Designer 2013, use the Versions pane in the Page Summary view to access detailed version information of a file. You can access the Page Summary view by:
    a.  (Left) Clicking on a filename in the Site Pages list.
    b. Select a file Site Pages list by clicking anywhere in the row (except the filename) and then clicking on “Page Settings” in the Site Pages.
    c. Restore the required version.
    Thanks for the understanding and support.
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Edit webpart properties using sharepoint designer workflow

    Hi Guys,
    I am not sure if there is any way to Edit properties of Excel Web Access WebPart using SharePoint Designer Workflow. I want to change workbook source of a web part on specific date.
    I don't have environment to write custom code.
    Thanks, Nilesh

    Hi,
    Per my knowledge, we can't achieve your requirement using SharePoint Designer Workflow.
    We have to use custom code to achieve it. The following articles for your reference:
    How to: Work with Web Parts on a Page Using JavaScript
    http://msdn.microsoft.com/en-us/library/office/hh185010(v=office.14).aspx
    Programmatically Update the SharePoint Web Part Properties on the List Forms
    http://nikpatel.net/2010/11/04/programmatically-update-the-sharepoint-web-part-properties-on-site-pages/
    ExcelWebRenderer class
    http://msdn.microsoft.com/en-us/library/microsoft.office.excel.webui.excelwebrenderer(v=office.15).aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Create Custom Application Page using SharePoint designer

    Hi All,
               I have a task to create the Custom Application page using SharePoint designer.Can any one help me how can I do this.Can any one help me how can I achieve this
    Samar

    Hi Samar,
    By application page do you mean writing C# code from SP designer? If so as far as I know you can't write C# code from designer, you have to use Visual Studio for it.
    But if you only want an aspx page with some JS code you can create one from "all files" in designer. you will see files menü on ribbon from where you can create aspx page.
    Best regards,
    Mustafa Yılmaz
    Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz

  • How to send the folder url using SharePoint Designer WF??

    Hi,
    i am trying to send the folder url as a email link using SharePoint designer workflow. i already created the WF which is sending the item url attaching with email. is there anyway i can add folder url too, so that once user will click they can see all the
    files in that folder?
    Thanks

    I think you've got a quote in the wrong place, but you're close. 
    Do a 'set workflow variable', and create a new one called whatever - this one was called link
    Add that variable to your email:
     Of course you can set your text to whatever you want. I use this technique to do formatting in email - you can create a pretty complex bit of html in a string variable and insert it into email - Outlook/Exchange will interpret.
    And actually, I think there's another variable, maybe in the workflow context section, that would have your site address, so you wouldn't have to hardcode your https://xxxx.com . 
    Robin

  • Need to use sharepoint designer 2013 or use Infopath 2013 directly

    I created a custom list on a test Sharepoint 2013  website. My intent is to edit this custom list in Infopath 2013 so I can make custom modifications to the form. I am trying to determine if there is a point of placing the custom list in SharePoint
    Designer 2013 before I place the custom list in Infopath 2013 so I can create a custom form.
    when I run the custom list from the test Sharepoint 2013 website, there are a default 'save' and 'cancel' buttons. However when I access the custom list next in sharepoint designer 2013, there are the original 'save' and 'cancel' buttons on the top of the
    form and there are the 'save' and 'cancel' buttons at the bottom of the form.
    Thus can you tell me if there is a reason to place the custom list in sharepoint designer 2013 and what the reason is? Do I need the default forms of displayform, editform, and updateform?  If so, I only want one set of 'cancel/save' buttons on the
    form. Thus can you tell me how to keep only one set of save and cancel buttons to be displayed on the form?
    If I do not need SharePoint designer 2013, should I just go head and create the form needed in Infopath 2013?

    Hi Wendy,
    Based on you description, my understanding is that you want to custom your list form, and you want to keep only one set of 'cancel/save' buttons on the form.
    It is by default that there will be two set of 'cancel/save' buttons on the form after changing Form with SharePoint Designer.
    I suggest you custom your list form with InfoPath.
    Although it is by default that “Save” and “Cancel” Buttons disappeared after changing Form with InfoPath.
    You can Create Submit Button in an InfoPath Form .
    http://community.office365.com/en-us/b/office_365_community_blog/archive/2013/05/21/infopath-save-and-new-button-grid-user-post.aspx
    You can Create cancel Button in an InfoPath Form. Adding a button with a rule of closing the form when clicking.
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they
    help and unmark them if they provide no help. If you have
    feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • Copy List Item Attachment for archiving using SharePoint Designer 2013

    hi,
    how to Copy List Item Attachment for archiving using SharePoint Designer 2013

    1. You can use access:
    http://viziblr.com/news/2011/11/5/batch-exporting-sharepoint-2010-list-item-attachments-using.html
    Or you can try below script
    You can loop through each list item, and get each attachment.
    List<SPAttachment> attachments = new List<SPAttachment>();
    SPList list = SPContext.Current.Web.Lists["My List"];
    foreach (SPListItem item in list.Items)
    attachments.AddRange(item.Attachments.Cast<SPAttachment>());
    If this helped you resolve your issue, please mark it Answered

  • Workflow to send email notification to the assigned person using Sharepoint Designer 2013

    Hi,
    The requirement is whenever the assigned to Field is changed to someone, the assigned to person should get an email notification saying that the item has been assigned to you.
    I created a sharepoint designer List Workflow to send an email notification, below are the steps,
    1. Log workflow to the workflow history
    2. then Wait for Assigned to be not empty
    3. then Email currentItem:AssignedTo
    4.then stop the workflow
    But the thing is whenever any field is changed in the particular item this email triggers, I want to send email only when Assigned to Field is changed and not any other field. how do i write the condition to check only if the assigned to field is changed
    or not and and how i trigger the email.
    Any help is much appreciated.
    Thank you
    Smile Always

    Hi,
    According to your post, my understanding is that you want to send email via workflow while the assigned to field value changed.
    We can create a helper field
    which will store the previous value of the Assigned To, then you can compare the current value with previous value of assigned to and send an email accordingly.
    I have made a simple workflow demo below, you can refer to it.
    I have created a new single line of text type field AssignedPerson in the list, then use the workflow below to achieve your scenario.
    More reference:
    http://officepowerups.com/2013/07/09/send-email-when-specific-field-changes-in-sharepoint/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for