How to create editable tablecells for a single table row dynamically?

Hi
How to make the cell of a tablerow editable based on flag in backing list object bound to row? I can't decide the editable property while creating table columns. So i can't use setCellFactory() during creation. However setCellFactory() makes all cells in table column editable.How to make non-editable table row cell editable and vice-versa based on flag?

hi
good
if you want to create two different view for a same table than you cant give the same name for the same view,otherwise it would allow you to create the view.Try out with different view name as well as the function group name,i hope this ll work.
thanks
mrutyun^

Similar Messages

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to set dbms_stats parameters for a single table

Hi,
I see that dbms_stats has the following procedure:
PROCEDURE SET_PARAM
Argument Name Type In/Out Default?
PNAME VARCHAR2 IN
PVAL VARCHAR2 IN
Is there a way to change the parameters only for a single table?
I need to set METHOD_OPT=>'FOR ALL COLUMNS SIZE 1' only for a specific table...

I'm sorry, mate. It looks like setting individual table preferences was introduced in 11g (and doesn't seem to work all that well).
You can still:
1. Explicitly specify any of the supported parameters by using DBMS_STATS.GATHER_TABLE_STATS() for the individual table and run it along.
2. Write a PL/SQL wrapper for let's say DBMS_STATS.GATHER_SCHEMA_STATS/GATHER_DTABASE_STATS that would gather the stats for the whole schema but ignore this particular table. Then gather the stats for the table with the METHOD_OPT parameter of your choice that could be different from the one used for the rest of the schema.
This could be achieved by locking particular table stats with DBMS_STATS.LOCK_TABLE_STATS, running GATHER_SCHEMA_STATS with force=>FALSE (which is the default). That parameter will make the procedure ignore any tables with locked stats. As the last step of the wrapper you can execute DBMS_STATS.GATHER_TABLE_STATS for the table in question with the desired METHOD_OPT and force=>TRUE.
It's a little more work, but may solve your problem.
Max
Edited by: Max Seleznev on Nov 28, 2012 6:21 PM
Edited by: Max Seleznev on Nov 28, 2012 6:22 PM

How-to synchronize edit forms for a single View Object tree node entrie

Hi all,
I created a tree from a single View Object,
follow this [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/32-tree-table-from-single-vo-169174.pdf]
then i want to create and synchronize edit forms for tree node entries,
follow this [http://www.oracle.com/technetwork/developer-tools/adf/learnmore/50-synchromize-form-treeselection-169192.pdf]
but it not working when i click child node!!
i found the latter tree from many View Object ,but the former tree from single View Object.
what should i do?
Thanks in advance

Hi,
say the tree is built from ViewObject1. In the AM model, create a second View Object instance for this. Say ViewObject2. Create the form from ViewObject2 and the tree from ViewObject1. When creating the tree, use the"Target Data Source" option at the bottom to reference the iterator of ViewObject2. Then create a PartialTrigger on the paneFormLayout that holds the synch form. In the partial trigger property, reference the tree so that when the tree selection changes, the form is updated. Then create a PartialTrigger property on the tree and point it to the submit button of the form so you can show updated values in the tree.
Frank

How to create object class for a z table

Hi All,
I have a z table and I want to register the changes of fields should be logged to CDHDR and CDPOS table.
Is this possible?
If yes how can I creat an object class for a z table. I have already checked the change document option in z data element.
Please help.
Regards,
Jeetu
Moderator message: standard functionality, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 6, 2010 6:16 PM

Tcode SCDO. You'll need to create a change document for you Z table and then use the FM created to record the changed data.

How to Create Authorization Group for SAP Standard Tables

All,
I have 10 standard tables which are required to maintain by the user in Production environment.
Is there any way to create a custom auth group for the standard table?
Is it possible to assign same table in two different auth groups?
Please advice
Thanks,
Kotesh

Multiple tables can be linked to an auth group, but one table can be linked to only one auth group.
You cannot link one table to more than one auth group.
It is always advised to try to find an existing auth group having tables of same functinality and criticality, before creating a new auth group.
In case you don't have any such auth group, I feel you can create a Z auth group using se16->tbrg.
You can also create auth group using tcode se54.

How to create Multiple Address for a single customer

Respected Members,
In tcode Xd01 we create on customer but there we can maintain only one address but sometimes a scenario can be that single customer can have different address .
How to do that.Any exit is available to create multiple address with creation of single customer.
This provision is given while creating a Business Partner.Tcode is BP .In this Address Overview tab is there and you maintain multiple address to single Busines partner.
Same thing can we do for the customer.
Any solutions or suggestions,please give me your support.
Thanks

Hello Manish,
Unfortunately Customers have only one address. However you can use contact persons to store different addresses, or (in the Sales view) you can assign other partner functions with different addresses (e.g. one customer acting as the Sold-to partner may have different Ship-to partners).
If these options do not meet your requirements, you could extend the customer master data with your own functionality and enhance transaction XD01 with your own screens for holding alternate addresses.
Regards,
John.

How to create updatable summary for columns in table view

Dear All,
ADF BC and Faces, i have got a table view where user can register hours for each day of the week, for which i'd like to create summary(sum-up)fields that display the number of total for each day, and it is updatable at run time(i.e. when numbers are put in, summary fields get updated automatically).
how do i do? some links/examples available? thank you.
regards
Jerry

http://www.freewebalbum.com/blogs/faces/bjanko/blogs.jsp?blog=bjanko20070725180020

How to create New columns for the Internal Table Dynamically?

HI Guys,
In my logic i have to create new columns depending on the logic which i am executing.
My requirement is .I have to display o/p like this
Material || Year || Period || Mix ratio || Vendor ||Mix Ratio || Vendor || Mix Ratio Vendor || Mix ratio || Vendor || Mix ratio.............................from table's CKMLMV003 and CKMLMV001.Her i have to display the o/p in the above format and i have to display Vendor and Mix Ratio for 5 columns irrespective of data .If i have more than 5 columns for any record then i have to create a New columns dynamically for Vendor and Mix ratio.If anybody want my code i can Submit But plz tell with example how to do?
The O/P must be finally shown in ALV Grid
Thanks,
Gopi

You must create the entire internal table dynamically, you can not add columns to a statically define internal table. Here is an example of creating a dynamic internal table.
Creation of internal table dynamically based on the Date Range entered
Regards,
Rich Heilman

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How to create an extension for generated type idoc

Hi all,
Can u please look into this
How to create an extension for generated type idoc ? for example Idoc type BATMAS02

Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
With SAP releases below 4.5B, you cannot capture changes to business address through change pointers because a change document object is not available for capturing business address changes, and also earlier releases have not been configured to write change documents for a contact personâs business address. If you would like this functionality, you can either create change document objects, generate function modules to create change documents, and perform ALE configuration to tie it in, or make a cosmetic change to the contact person screen data while changing the contact personâs business address so that it gets captured as a change to the Customer Master. Subsequently, the ALE enhancement that you performed captures the contact personâs business address.
Inbound interfaces. The process for enhancing inbound ALE interfaces is similar for outbound, with a few exceptions; specifically in the coding of customer functions (function exits) for the ALE/EDI function modules.
The first step is to create an IDOC extension for the specific Basic IDOC type by adding new segments at the appropriate hierarchy level: that is, associated to the relevant existing segment. Populate the data fields on the new segments with application data by the translator or external system/program before importing them into the R/3 System. Then, find the ALE function module that is invoked by the inbound processing. By browsing through the code or reading the documentation on the function exit enhancements using the SMOD transaction, identify the function exit in which you should place your code. The technique used in the code to post the additional or modified IDOC data to the application can vary based on the application rules and requirements, the data available at that point in processing, and the application function modules available to update the application tables. It is important to search first for application modules that process the data and see if they can be called within the function exit. If the additional data in the extended segments in specific to a custom table or resides in nonkey fields of a single or small set of tables, you may be able to update it directly by SQL statements in the function exit. This approach should be carefully evaluated and is certainly not highly recommended.
Another option is to use Call Transaction from within the function exit to process the additional data. For example, in the case of message type WMMBXY for inbound goods movements from a warehouse management system, the standard interface creates batches for materials, but does not update its characteristics. In such a case, you can use Call Transaction MSC1 to create the batch and assign characteristic values to it from within the function exit provided.
regards,
srinivas

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to create a PR for each Maintenance Order

Dear All,
Please guide me how to create a PR for each Maintenance Order.
I test on Ides, I have some Maintenance Orders, all of them require the same stock material. When I run MRP, system always create one PR for all requirements. I don't know how to change.
Regards,
QuangDD

Hi,
As you planning for Stock Items, by running MRP, system will create single PR only. If it is non stock items, then it would be possible to create different PR based on Orders.
Regards,
Maheswaran.

How to create a substitute for requester in SRM 7.0

Hi,
do you know how to create a substitute for requester?
we have groups of 2 people and we want that they can see and edit shopping carts one of each other. Do you know how is it possible? it will be necessary for all SCs.
Thanks.
Regards,
Nelson

You can use the "Team Cart" feature introduced in SRM 7 for your requirement.
Take a look at this wiki page for more information http://wiki.sdn.sap.com/wiki/display/SRM/Team+purchasing
Edited by: Jay Yang on Mar 31, 2011 10:47 AM

How to create editable tablecells for a single table row dynamically?

Similar Messages

Maybe you are looking for