How to create ellipsed clip with hole in center
Simple circle with hole in center, and clip it...I want everything in circle be visible, except the hole inside (obviously I want everything ouside of outer circle be hidden)
thanks for reply :)
I hope that imageShack will work... http://img684.imageshack.us/img684/8672/thisa.jpg
Also...i dont know what do you want from me, but elseway I dont know how to explain to you my problem. I just want to:
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D) g;
g2.setRenderingHints(antialiasing);
ellipse.setFrame(20, 0, getWidth() - 40, getWidth() - 40);
g2.setPaint(Color.black);
g2.draw(ellipse);
g2.setClip(ellipse); // but this will just clip everything except the space inside the circle
// I dont know how to modify clip to insert in this circle another shape which space inside will be clipped
}
Similar Messages
-
How to move multiple clips with transitions?
Im still transitioning from FCP7 to FCP 10.1.2 and can't believe I have missed the lesson that explains how to move multiple clips with transitions.
Up till now I have tried several work arounds including deleting all the transitions then using the (P) Position tool to move the clips from the primary track to some track above it then re adding all the transitions. This is a function I do on a daily basis. Am I missing something? Please help!
Thank youWith some further investigation, the transitions have nothing to do with my problem. In my case there was a tiny “Black gap slug” within the group that was preventing me from being able set it on top of another group of clips or gap someplace. But even with the gap removed… I can move the clips on top of another group but the transitions stay behind on the primary (Magnetic)
In the screen shot you can see what happens when I move a group out of the primary (magnetic) timeline onto a gap. All the transitions get left behind.
Ive notices that Cutting and pasting will only paste the sequence some other place on the primary (magnetic) timeline for me.
An example of why I would want to put a cropped/ resized group on top of another group is to do picture in picture effects or if I wanted to create a background behind a set of adjusted clips. -
Problem FCP6. It is impossible to create multicamera clip with DV and HDV.
Problem FCP6. It is impossible to create multicamera clip with DV and HDV. I wish to create the multicamera clip from files dv and hdv. But the program informs that it is impossible because the different size frame. Video dv and hdv in the multicamera are incompatible? (Excuse for possible errors in the text)
Ken Summerall, Jr. wrote:
Do I need to export this as a movie before I can use it to be allowed to Multiclip with the DV footage?
How else are you going to use it?
I thought somehow there was a way to use the sequence itself into the multiclip.
Like a nested sequence used as a clip.
Thanks for your help. -
How to create a node with attributes at runtime in webdynpro for ABAP?
Hi Experts,
How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
GopalHi
I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga -
How to create excise invoice with reference thorugh credit memo
Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memoHi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers -
How to create a complaint with pre-decessor document Inovice?
Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot! -
How to create a table with events in smartforms?
How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements. -
How to create shipment document with out inbound delivery document
Dear Friends
How to create shipment document with out outbound/inbound delivery document.
In my client scenario, there is no inbound delivery for normal purchases.
Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
Can we do shipment creation with reference to PO?
If it is possible, how it will be?
Please let it solve
With regards
LakshmikanthDear Sameer,
Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
For more information please go through this SAP help link
Note:- Shipment process need to be carry out for the deliveries before PGI.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
I hope this will help you,
Regards,
Murali. -
How to create a table with varied number of columns?
I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.Why did you create a new thread for this?
How to create a table with varied number of columns? -
How to create a table with datatype blob and insert a pdf file (ravi)
how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you. -
I need your expert opinion on how to create a map with multiple conditions.
Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very muchthanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion. -
How to Create Business Partner with fix number in t-code :BP
Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
VimolDear Shobhit,
How to put the thread as you mentioned.
Best regards, -
How to create a GregorianCalendar with timezone information
Hello All,
Can any one tell me how to create a GregorianCalendar with time zone information i.e
I have following information with me
year
month
day
hour
minutes
seconds
deci-seconds
direction from UTC "+" / "-" (in ascii notation)
hours from UTC minutes from UTC
How can i construct a calender out of it?How to construct a calendar:
Calendar.getInstance()
Did you consider looking at the API docs with the set() method for calendar and the field constants for the values you can set?
Although I wonder whether it's simpler to just concatenate the data to a String and parse it to a Date instance using SimpleDateFormat. -
How to create a field with 1200 chars length
Hi,
Will anybody let me know how to create a field with length 1200 in a table.
Regards,
MadhaviHi Madhvi,
Other thing what you can do is
1. First create a Table type.
Goto SE11-> Dataelements ->Table type
There on the next screen select Predefine radio button & there provide data type & size.
2. Create a structure having a field typa of Table type created before. say that field is quant.
Now in your program refer that structure to create an internal table & work area.
Now if u append ur text to the field quant.
try creating line type of size more that 255 if it works then fine other wise reduce it.
Note:: This will be a deep structure.
so first append value to the field quant, the at the end of first record append valu to ur internal table.
thanks
Satyam -
How to create a function with ref_cursor as parameter in OWB 10.1
Hi,
Can any one help me how to create a function with ref_cursor as parameter in OWB 10.1.?
Its urgent. Please help me.
Thanks,
SivHi David,
Thanks for your reply.
Before going for this function, I need to create a package in transformation node in owb module.
My package is as follows,
Create or replace package 123
type xxx is RECORD ( parameters);
type yyy is RECORD (parameters);
type aaa is table of yyy;
type bbb is REF CURSOR return xxx;
type ccc is record (parameters);
type ddd is ref cursor return eee;
END;
How can I create the above kind of package manually in OWB 10.1 (Should not to import the package)
Please help me its urgent.
Thanks,
Siv
Maybe you are looking for
-
My computer got a virus today. I will likely need to do a factory reset. If I do this and have to reload itunes, will I lose everything and have to load everything back? How will this affect my ipod touch, which is backed up nightly to cloud?
-
Display is intermittently lost
Hello, I have the Macbook Pro from last fall (2009). This is the 3.06GHz Intel Core duo with the Nvidia GeForce 9400 video card. Sporadically over the summer the display would fail to come on when waking from sleep. No key combinations would bring th
-
How do get PDFs to open in iBooks not a viewer?
I am trying to open a PDF that I downloaded into iBooks on my MacBook Air. When I attempt to open it it opens using my Smart Viewer. I would like to open it in iBooks so I can take notes, highlight, etc. Any help would be appreciated. Thanks
-
Encoding audio files with QT for the internet
Hi group, I would like to put my showreel up on the net in a QTime format BUT make it locked, or non-downloadable... Is this possible?, it seems with QTpro you can download anything! thanks JM
-
How to I transfer my itunes account without losing my music?
I have kept my itunes account on an old PC running XP and just got the new iphone and have to transfer my intunes account onto a new computer. How do I transfer the account without losing all my music?