How to create( end user ) user specific sales order screen ?

Hello Gurus,
We some customer requirement :The pricing condition tab to be disabled for some end users( User specific role ) .can we do this requirement in screen varient or any other methods ?
Looking for your inputs
Thanks and regards
Venkat

Hi,
Correction pls
OSS note 105621
regards,
Siraj

Similar Messages

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an Invoice for the sales order using the T-Code VF01

Hello Experts,
How to create an Invoice for a sales order using the T-Code VF01?
Thanks in advace,
Suma

hi,
Make the following settings-
1. Create sales document and billing type
2. assign billing type in sales document type config VOV8
3. Activate itemcategory as sales order related billing
4. Maintain copy control header and item level between sales order and billing
5. Maintain pricing procedure for sales order and billing
6. Define Output procedure in case to print invoice
Regards
Goutham

How to create one delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incorterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Hi
To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
Finally See Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
Regards
Eduardo

How to create one delivery for multiple sales order

Hi!! Friends,
Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
Regards
AKASH
Message was edited by:
AKASH TAMBI

Hi.,
You can combine different orders in to one delivery ,But for the customer Order combination should be checked in the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
REWARD if helpfull
Thanks & Regards
Narayana

How to create a sap script for sales order header items?

Hi friends i am totally new to scripts i have got a task where i have to create a sap script for sales order header items details, the clue that i have got is to create using MEDRUCK but i have got no idea please can any body help me with this task with any sample sap script?
Points will be rwwared with out fail Thks in advance.

Hi,
The Standard Form NAme is RVORDER01
Regards
Sandipan

How to create a multi-level configuration sales order?

Hi,
    My client use configurable material to sell computers. And the production mode is MTO. One sales order item correspond with a production order
    Now my client also sell array which consist of two computers, two storage, one UPS power etc. That means I must realize multi-level configuration. First, choose the computer type. Second, based on the choosed computer in first step, choose the cpu, disk and so on. And then based on the sales order item, there must be several production order related to the same sales order item.
    Now I have semi-finished product B1,B2--computer. Class type is 300. Many characteristics is allocated to the class. B type material has the BOM which consist of cpu,disk etc.
    Then I created the finished product A--array. Class type is 300. Allocated characteristics is the B1,B2. A has the BOM which consist of B1,B2 etc.
    When I create sales order, I can only config the first level,choose computers for A, can not choose cpu,disk for computers.
    So, how can I find a solution for this scenario?
    Thanks in advance.

Thanks, Waza
1. Does the Sales order BOM explode in the sales order?
No. Just one top item would be ok for my client.
2. Why do thy want this in the sales order? They can explode the BOM in the production order, do they then need pricing at the component level?
They do not need pricing at the component level. Exploding the BOM in the production order is acceptable. But how can I config the configurable material in components of production order?
I tried collective order, but the second level of configurable material can not generate production order. I just make use of special procurement 52 in MRP2 of top finished product. Is there something I missed?
Thanks again.

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

How to restrict users to not default layout while creating a user specific?

Hi all,
I have a problem with frequent changes in report layout setting. When users trying to create a user specific layout in the window "Default" is set, out of "User specific" & "default" checkbox defaultly, so users saving the layouts. so it's overwritting on existing layout. we are ossing the old data. how to restrict end users to create new one with out changing the existing one.How to change that default check in "Default" check box to user specific defaultly. where i have to do settings for this. Thanks in advance.
Pradeesh

Hi ,
My problem is still not resolved. I tried applying the people picker property and set a specific field(an email id field) to be available to only admins. Now the field is not visible to the normal users but only admins which is good but that email field
should be able to take normal users as wel as admin's email ID. currently due to the people picker property it only takes admin's ID and not normal user's ID - which is not as per expectation.
What this email ID field does is - when a normal user is logged in he/she wont see this field in that view. But when an admin logs in he/she can switch to admin view and see this field . The admin can put any user's ID in this field and pull out the required
resource's Time Report for modification.
Please let me know how do i overcome my problem. Detailed step description will be very helpfull .
As per Cameron's suggestion (add a rule on the "additional admin section") , i am not sure how exactly that is done. Would help a lot if i got to know how this works.
Regards,
Guru

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to create a user in oracle.

how to create a user in oracle level.i know how to create from front end.can any body suggest.how to create oracle user from backend.
Thanks,
Dave

Hi,
We can use the 'hr_user_acct_internal.create_fnd_user' API to create the users. The sample code is as follows:
BEGIN
apps.hr_user_acct_internal.create_fnd_user
(p_user_name => 'XXX',
p_password => 'XXX',
p_employee_id => 1234(This is the person id from per_all_people_f),
p_user_id => x_user_id,
p_user_start_date => SYSDATE,
p_email_address => 'XXX',
p_description => 'XXX',
p_password_date => NULL
COMMIT;
END;
and to add the responsibility to the user, we can use the following code.
BEGIN
fnd_user_pkg.addresp
(username => 'XXX',
resp_app => user_res_rec.application_short_name,
resp_key => user_res_rec.responsibility_key,
security_group => 'STANDARD',
description => 'DESCRIPTION',
start_date => SYSDATE,
end_date => NULL
END
Best Regards
Arun Kumar S.R
Apps Associates

How to create a user that can login the LDAP?

I want to create a user that can login the OID/LDAP. I know how to create a user, it is allowed to login OIDDAS, but I also want the user to grant access to ldap directly. How do i do that?
And how can I give it read rights and or update/delete rights on a specific tree?
Regards
Eelco

Eelco,
did you see the OiD developers guide? Here you find some examples how to create users in OiD using pl/sql or java.
http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95193/smplcode.htm#637294
how to use directory access control can be found in
http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95192/access.htm#1054232
--Olaf

How to create Mobile User Account

Hi all,
I have a dumb question but it makes me crazy !!!
I'm new in CRM 5.2 and in mobile as weel.
My question is : How to create a user acount into my mobile infrastructure ?
I've followed the following explanation but I don't find the solution :
[help|http://help.sap.com/saphelp_crm60/helpdata/de/c8/2ae1a3c73245c8aef8c4b69c2ff072/content.htm]
In there, it tells me to go thought User Management tool of Mobile Application Studio ( is it Microsoft Visual Studio ?) but in there i do not find any tools.
Thanks for your future help
Regards

hi,
Creation of User Accounts
Purpose
This process describes the steps required to create user accounts for secured and controlled access to the Mobile Application Repository (MAR). User accounts are created for consultants, who intend to customize mobile client applications using Mobile Application Studio (MAS). User account allows a consultant to log on to MAS.
Process Flow
       1.      During the installation of MAR, the system enables the User Management feature.
If MAR is upgraded from a release prior to 3.0 to the current release, the User Management feature must be enabled manually by system administrator. This is done by changing the umfrc parameter value to YES in the ARS_SYSTABLE.
       2.      The CRM technical administrator creates a DSN to access MAR by using the default internal login arsdb with password arsdb.
       3.      The CRM technical administrator carries out the following tasks using the User Manager tool of MAS:
                            a.      Creates user accounts.
                            b.      Associates each user account with a standard MAR profile. For more information, see Profiles of the Mobile Application Repository.
                            c.      Specifies a password for each user account.
Login IDs of the Mobile Application Repository
Definition
A login ID is a source through which users log on to Mobile Application Studio, and connect to the Mobile Application Repository (MAR). When MAR is installed, standard login IDs are available by default. While creating user accounts, the system administrator associates a standard login ID with the profile of each user account.
Structure
Login ID
Allows you to:
ARSAdmin
·        Perform administrative activities in MAR.
·        Create and modify development objects in MAR.
·        Modify the password of a user account.
ARSDeveloper
·        Create and modify development objects in MAR.
·        Modify your own password.
ARSUser
·        View development objects in MAR.
·        Modify your own password.
ARSSys
·        Get information about the MAR.
·        Validate MAR users.
ARSdb
Create a DSN for MAR. The default password for this login is arsdb.
Profiles of the Mobile Application Repository
Definition
A profile of the Mobile Application Repository (MAR) is a collection of access rights defined for:
·        Development objects, like tiles, tile sets and business objects of mobile client applications
·        Services of MAR like change lists and namespaces
Structure
The standard profiles that are available are listed below.
Profile name
Associated login ID
Allows you to:
Administrator
ARSAdmin
·        Perform administrative activities like creating and maintaining users.
·        Read and write repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert a change list.
·        Transfer the ownership of objects to another MAR.
·        Create link objects to integrate tile set help.
·        Create and modify framework objects in MAR.
ROGuest
ARSUser
·        View development objects in MAR.
·        Modify your own password.
Developer
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release change lists that have been created only by you.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
SPDeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Modify your own password.
·        Create and modify development objects in MAR.
This profile does not allow you to release change lists.
QMResponsible
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
·        Release and revert change lists.
This profile does not allow you to create a change list.
Coordinator
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release and revert change lists.
·        Modify your own password.
·        Transfer the ownership of objects to another MAR.
Frwkuser
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Transfer the ownership of objects to another MAR.
·        Create and modify framework objects in MAR.
Infodeveloper
ARSDeveloper
·        Read repository specific information (ARS_SYSTABLE).
·        Create and modify development objects in MAR.
·        Release the change list you have created.
·        Create link objects to integrate tile set help.
thanks
karthik
ifhelpfull reward me some points

Creating end user pages

Hi,
I am new to IDM. I want to create end user self service password reset pages. Can anyone please tell me the steps "how to and where to create and code these pages".
one more thing, I dont want the subtabs in the IDM console. where i can modify these tabs.
thanks for the help

create a new role and use capabilities to hide tabs

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

How to create( end user ) user specific sales order screen ?

Similar Messages

Maybe you are looking for