How to create event for BOR BUS2009 Object ?

How to create a new event for BOR BUS2009 Object ?

Hi,
Please create a subtype for BOR BUS2009, say Z_BUS2009 and include your custom characteristic entities like Events, Methods, Key fields etc and finally do delegation. After delegation, all your custom changes reflects in BOR BUS2009.
Regards,
Prasanth

Similar Messages

  • How to create EVENTS for a View Cluster.

    Hi Tech Gurus,
    I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
    Thanks in advance for your esteemed replies.
    Regards,
    Raghavendra Goutham P.

    Hello Pasapula
    When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
    Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
    For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
    report zus_0120_u1.
    * Common Data und access routines for user exits in VC maintenance
    include LSVCMCOD.
    include  zus_0120_f1. "FORM routines for VC events
    Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
    Regards
      Uwe

  • How to create events for Z table ?

    Hi Experts,
        Can anybody tell me how to create an event for Z table. I have a Z table in that a Particular filed is there as BELNR.
    This Table is being getting updated by various application & even with the User-Exits also. I want to sned an e-mail whenver this particular field is getting updated by any program.
    how to do this? which event to be used for a particular field?
    Pl. Help....
    Regards,
    Umesh

    Umesh,
    I hope below method will help solving the requirement:
    -Changes made to the keydocuments are recorded in the change document
    Header table i.e. CDHDR and Item table CDPOS, Additional change
    pointers are written in the BDCP and BDCPS tables. (BDCP and BDCPS in your case)
    -A standard program RBDMIDOC is sechuled to run on periodic basis to
    evaluate the change pointers for a message type and starts the ALE
    process for distributing the Masterdata to the appropriate destination.
    -'Object' is collection of fields of different database tables. T.code
    for creating an object is SCDO.
    Also:
    1. BD61 Active change pointers generally
    - Check the checkbox "Change pointers activated -generally"
    - Save it
    2. BD50 Active change pointers for Message Type
    - Message Type Active
    Thanks,
    Preyansh

  • How to create Event for a BO

    Hi Experts,
    I am developing WF for tcode MD03, this transaction is used to create planned order.
    I need to trigger a WF to send mail when ever a Planned order is created using MD03 tcode.
    BUS2004 is the BO for Planned order, but this BO does not have any event linked to it. So my question is how to create a event to a BO.
    Also, I used BTE to create a Z function module, this FM is getting triggered whenPlanned order is created using MD03 tcode. Is it possible to trigger a WF using this FM?, If yes, how?
    Thanks in advance.
    Regards
    Balu

    Hi All,
    Thanks for your useful suggestion.
    I placed a breakpoint in the Z FM to check whether the created planned is updated in Plaf table when this FM is triggered. But i found that Plaf table is not updated when the FM is getting triggered.
    Do you still recommend me to go ahead and call the WF?
    Regards
    Balu

  • How to create events for My Notifications Portlet

    Hi,
    The "My Notifications" portlet has no events. How can I create an event for this ?
    The scenario is that when "My Notifications" portlet shows a message, this event should activates other portlet, say SMS portlet to send a SMS to user notified him/her that there was an message in his/her Notification page.
    How can I archive this ?
    Thanks in advance.

    Hello Pasapula
    When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
    Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
    For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
    report zus_0120_u1.
    * Common Data und access routines for user exits in VC maintenance
    include LSVCMCOD.
    include  zus_0120_f1. "FORM routines for VC events
    Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
    Regards
      Uwe

  • How to create events for a limited amount of months

    Hi guys,
    It happened to me more than once wanting to create an event that would repeat every month for  5 months ( example ) and having to create an individual event for every single month since there is now way to limited the amount of months a event can occur.
    Is there a way to limit the amount of months of an event?
    Thanks in advance for your help.

    Hello Pasapula
    When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
    Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
    For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
    report zus_0120_u1.
    * Common Data und access routines for user exits in VC maintenance
    include LSVCMCOD.
    include  zus_0120_f1. "FORM routines for VC events
    Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
    Regards
      Uwe

  • How to create variables for Characteristic Info-objects in Rows / Columns

    I want to create variables in abovementioned manner for COPA retraction in BPS, as COPA retraction does not recognise variables created in "filter" section of Bex. Can sumone advise , as I have tried all the possibilities of creating but failed to do so?

    Hi Ravi/All,
    Actually my problem will be solved if I am able to create variables in either Rows/Columns area of BeX.
    Variables are getting created easily in Filter section of BeX (but in COPA , it will not serve any purpose COPA retraction does not recognise contents of Filter/variables contained in the filter).
    In fact variables are getting created in Rows/Colums of Bex, but they are in the form of structures. (Again multiple structures (more than 1)  are not recognised in COPA retraction.

  • How to create event

    HI,
    I am trying to trigger a workflow whenever a contract is created against the Requisition.
    I put the trace on(SWELS) and created a contract and got BOR object FREBUS2012 and Event CREATED.
    But when i am using this BOR object and Event in the start event of workflow and creating a contract it is not triggering the workflow.  But workflow is getting trigered whenever i am creating PO.
    When i am tracing PO creation in SWELS i am getting same BOR object and same event.
    Can anyone help me with that how can i create release strategy for Contract or how can i create "CREATE" event for BOR ZBUS2014 which is the copy of BUS2014(Contract) and does not have "CREATE" event.
    Can you explain me also what is release strategy. I have no idea what is that for and how it is helpful in Workflow.
    Any help would be appreciated.
    Thanks in Advance.

    Hi,
    Can anyone help me with that how can i create release strategy for Contract or how can i create "CREATE" event for BOR ZBUS2014 which is the copy of BUS2014(Contract) and does not have "CREATE" event.
    You don't see the created event in ZBUS2014 because you have not delegated it. Delegation means whenever created event of BUS2014 gets triggered your BO ZBUS2014 which has been delegated to BUS2014 will be called. After delegating the BO in workflow you can refer to BUS2014 wherever required instead of giving as ZBUS2014.
    Steps for delegation
    1. Go to SWO1 tcode
    2. Enter the BO name as ZBUS2014. Click settings - delegate.
    3. Click new entries. You will find three fields there.
    Give Object type as BUS2014. Person responsible as your userid. Delegation type as ZBUS2014 and save this entry.
    KR,
    Bharath

  • HOW TO Create  variants for transaction MASS on LFA1 object?

    hOW TO Create  variants for transaction MASS on LFA1 object?
    Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
    Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
    Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

    Hi Oscar ,
    You need to create optional date prompt variable  in BW which fills your requirement .
    Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
    if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
    when creating webi schedules , leave prompts as blank.

  • What is authorization object and how to create it for a table

    Hi All,
    What is authorization object and how to create it for a table?
    Thanks

    Hi
    Authorization
    For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
    Authorization Check for Transactions
    You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
    Authorization Check for ABAP Programs
    For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
    Authorization Check in ABAP Programs
    A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
    AUTHORITY-CHECK OBJECT object
                            ID name1 FIELD f1
                            ID name2 FIELD f2
                            ID namen FIELD fn.
    object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With  f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1  FIELD f2 with DUMMY.
    After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
    Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
    ·        0: The user has an authorization for all specified values.
    ·        4: The user does not have the authorization.
    ·        8: The number of specified fields is incorrect.
    ·        12: The specified authorization object does not exist.
    A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
    REPORT demo_authorithy_check.
    PARAMETERS pa_carr LIKE sflight-carrid.
    DATA wa_flights LIKE demo_focc.
    AT SELECTION-SCREEN.
      AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD pa_carr
                      ID 'ACTVT' FIELD '03'.
      IF sy-subrc = 4.
        MESSAGE e045(sabapdocu) WITH pa_carr.
      ELSEIF sy-subrc <> 0.
        MESSAGE e184(sabapdocu) WITH text-010.
      ENDIF.
    START-OF-SELECTION.
      SELECT  carrid connid fldate seatsmax seatsocc
        FROM  sflight
        INTO  CORRESPONDING FIELDS OF wa_flights
        WHERE carrid = pa_carr.
        WRITE: / wa_flights-carrid,
                 wa_flights-connid,
                 wa_flights-fldate,
                 wa_flights-seatsmax,
                 wa_flights-seatsocc.
      ENDSELECT.
    Regards
    Hitesh

  • How to create infostructure for my own archiving object?

    We created our own archiving objects.
    Could you help tell how to create infostructure for each of them?
    Any info would be appreciated.

    Hi,
    Infostructure creation:
    1. Create Field Catalog
    2. Create Infostructure and assign Field catalog created
    3. Activate Infostructure
    4. Fill Infostructure
    >> Retrieve archived data
    Path to create Field Catalog:
    Goto SARI >> Customizing >> Environment >> Create Filed catalog
    Note: 1. During creation of Field catalog make use of field name from SE11 transaction.
    2. Target field and Reference filed should be same and Source table from which you are considering the filed name
    3. Key filed name should be Indicated
    Path to create Infostructure
    Goto SARI >> Customizing >> Environment >> Create Infostructure
    Assign Archiving object for which this infostructure is created and assign filed catalog
    Activate it.
    Path to Fill structure
    Goto SARI >> Status >> Select Archiving object and consider option Fill per Infostructure
    In Archiving explorer you can retrieve archiving data.
    -Thanks,
    Ajay

  • How to create event based process chains

    Hi All,
    I would like to know about event based process chains. In connection to this, could you please answer the following queries,
    1. How to create events
    2. How to link created event to the process chain in the same BI or BW system and as well as from  
        externel BI system.
    3. How link one process chain with other process chain (i.e, After completion of one process chain, it
        should trigger other dependent process chain)
    Thanks and Regards,
    Kotesh.

    1). Doubt regarding first question.
    For example, i would like to create time based event (it should be trigger daily at specified time),
    where we have to maintain scheduling options while creating event.
    When i checked SM62 there i found only two options a). Event name and b). Description.
    Could please send any doucument link if you have.
    Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
    2). For externel BIW system also same procedure we need to follow or any difference.
    Ans : Externally you need to trigger the same event.
    3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
    Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
    I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
    Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
    But Metachain is preferred for such thing.Though it does similar thing.
    Hope this helps.

  • How to Create Event polling table

    hi,
    1)How to Create Event polling table
    2) wahts RPD stands for.
    3) when we are prefer Dynamic variables.
    thanks.
    raj

    1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
    2) Repository Project Design ?
    - More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
    3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

  • How to create wizard for a custom mainenance view/view cluster

    Hi Experts,
    I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help  the user to navigate  from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
    Please suggest how to create wizard for view cluster.
    I'll give max reward point for the helpful answer.
    Thanks in advance
    koustav

    Hello Pasapula
    When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
    Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
    For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
    report zus_0120_u1.
    * Common Data und access routines for user exits in VC maintenance
    include LSVCMCOD.
    include  zus_0120_f1. "FORM routines for VC events
    Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
    Regards
      Uwe

  • How to create infopackage for Cube to Cune to transaction

    HI Experts
    I have performed following steps for cube to cube load.
    1. Created source cube and loaded the data from R3
    2. Created Destination cube
    3. Generated Export Data source for the source cube. Here I'm able to see my datasource Icon(8ZFIGL_C01). When I double click on that it is give details.
    4. Defined the update rules for Destiination cube by assiging the infosource (8ZFIGL_C01) which is created in step3.
    5.Now I'm searching for the infosurce (8ZFIGL_C01) in data modelling -> infosource.  its not showing up any name with 8ZFIGL_C01.
    Kindly let me know how to create infopackage for this to laod the data from cube to cube.
    Additional information:
    I have set the optopn Display Generated Object in Settings.
    Thanks in advance for your help.
    Regards
    NLN

    Hi,
    Right Click on "Infosource" (TA RSA12 Top at the Right side Panel) and choose Insert lost nodes and refresh the screen and now search for your infosource and you will find it.
    See solution from SAT:
    Problems with Infosource Data Marts
    Best regards,
    Frank

Maybe you are looking for