How to create Event Node in smartform

Hi Experts,
could you please tell me how to create event node in smartform
Thanks in Advance,
Thanks&Regards
Geetha

HI,
plz explain your problem in deeply.
And as per me you first create page and righ click on it
Then create window as per your requirement.
if you want to put condition ot events true or false Righ click on your window
then goto flow logic -> Altenative
You can found 2 events in Condition.
So you can assign this events.If you want to put condition or event on test then goto Text here in General Attributes in bottom side you can find even on page.
Try it.

Similar Messages

Create section node in smartforms

Hi,
How to create section node in smartforms.
It is very urgent pls guide me.
Thanks in advance.
Ramakrishnaiah Y

Hello there,
The complex section unites the attributes of different nodes. Before the new node types for tables, templates, and loops were introduced, you used complex sections to deal with these contructions.
Older forms still use this node; but for new forms you should prefer the new node types.
SAP Strongly recommends to use Folder, Template, Table, and Loop instead of complex section. We dont even have the option of creating section in ECC 6.
REWARD POINTS IF U FIND IT USEFUL.
RACH.

How to create paragraph format in smartforms

Hi All,
Let me know how to create paragraph format in smartforms?
Thanks&Regards
Mahesh

Hi
When we create a smartform we can see in global settings , form attributes.
In form attributes we set the over all style of the smartform. Goto form attributes and open the tab output options. Here you can see the Style box. In this style box we enter the smartstyle created in transaction code smartstyles.
Open transaction smartstyles.
Create a new style.
Upon creating a new style you will see 3 folder structures under style name.
1. Header data
2. Paragraph format
3. Character format
To create paragraph format right click on the paragraph format node and click Create Node. Give it name. Now you will get a screen with 4 tabs.
Indents and spacing
Fonts
Tabs
Numbering and outline
Here you can provide the look you want.
Now add this smartstyle in your smartform's form attribute.
You can also provide individual smartstyles to each text element you create by giving the name of smartstyle in its output options tab. Each text element has a individual output option tab here you can give any smartstyle.
Click on the general attribute tab of any text element and give the paragraph format directly or by going to SAPScript editor mode.
Any more questions you can ask me directly mailing me.
Please do reward points if satisfied.

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create Dynamic Window in Smartforms

Hi all,
Could you please help me out on how to create Dynamic Window in smartforms excluding Main Window.
Thanks in Advance.
Vinay.

hi,
Hi,
1.If you are creating the Different windows for the Countries,then In conditions tab of window specify the Condition i.e.
company -code = '2201'.
2.Then that window can trigger ofr that condition.
3.Other wise, if you are using the different layouts ,then write the condition in Print program and call that form .
reward me if helpful.

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create a hyperlink in smartform

Hi All,
How to create a hyperlink in the smartform text editor so that when we click on that,we should be able to open the internet explorer.I have tried with the option insert URL.But still its not working.Do we need to do any further settings along with this?
Thanks in advance
Regards,
Akanksha

Hi,
check this:
http://help.sap.com/saphelp_47x200/helpdata/en/03/7560eccf0d11d3b565006094192fe3/frameset.htm
Create hyperlink in SMARTFORM
How to create a hyperlink in smartform
Create hyperlink in SMARTFORM
Re: URL in SmartForm sent as email body
Don't forget to reward if useful

How to create new node in feature

Dear Members,
Culd any one help me out .........
How to create new node in features..
Example: NUMKR
On defaulting which option to select to create new node?
Return value
field for decision operation
sub feature
programme
debugging operation
error operation
comment
How to proceed................????????????

hi,
Where you can select the option field for decision operation then select the filed which you want like personal area, subarea, employee group and subgroup.
and then select the node and then goto create and assign the return value by selecting the option ' Return value'.
NUMKR -> FILED - PERSKGemployee group) -> field PERSK(employee sub group) and --> return value.
thanks,
Vasu.

How to create events in iCal

I know we can create events (like birthdays, anniversary etc.) from address book and sync it with iCal. What i want to know is how do I create an event (b'day, anniversary etc.) for a person who is not in my address book.

Greetings,
Create the event (just like you would any event) and set the repeat to every year and add it to the calendar of your choice:
Hope that helps.

Flash CS4 - how to create event flow from children to parents?

In my opinion natural event flow direction is from children
to its parants.
E.g. when in dialog box buttons are pressed it is natural to
inform only
this dialog box about these actions. When dialog box can't
handle particular
event then passes it to its parent and so on .
Unfortunately this direction is not well supported by Flash.
To achieve
support for this event direction it is necessary to call
parent.dispatchEvent() with bubbling option off. This
solution is
inconvenient because sometimes I can't predict what event
types will be
triggered inside dialog components. Most likely there is no
function to
catch all events which have no defined handlers in dialog in
order to be
possible to pass them one level higher.
Have you got any experience with building communication model
between
objects in Flash applications?
Regards,
Marek

XML shema is basically an XML file. So u need to know how to create an XML,
provided u know how the shema file should be.
Creating an XML :
http://forum.java.sun.com/thread.jspa?threadID=5181031&messageID=9705786#9705786

How to create event in Form Portlet ?

I want to pass parameter from Form to Dynamic Page, but they don't have event so I can't pass parameter. How can I create event in Form ?
Please hepl me.
Thanks a lot.

I think I already answered this question in the main Portal forum.
Mick.

How to create Event for a BO

Hi Experts,
I am developing WF for tcode MD03, this transaction is used to create planned order.
I need to trigger a WF to send mail when ever a Planned order is created using MD03 tcode.
BUS2004 is the BO for Planned order, but this BO does not have any event linked to it. So my question is how to create a event to a BO.
Also, I used BTE to create a Z function module, this FM is getting triggered whenPlanned order is created using MD03 tcode. Is it possible to trigger a WF using this FM?, If yes, how?
Thanks in advance.
Regards
Balu

Hi All,
Thanks for your useful suggestion.
I placed a breakpoint in the Z FM to check whether the created planned is updated in Plaf table when this FM is triggered. But i found that Plaf table is not updated when the FM is getting triggered.
Do you still recommend me to go ahead and call the WF?
Regards
Balu

How to create event alert for particular column get updated

Hi every one.... plz help me
How to create oracle event alert when particular column is update. plz help me.... Acutually i need email alert when ever list price for an item column in pricing table get updated+... plz. Its urgent.

Oracle Event alert is based on update of specific table and not on specific column in table.
However you can create a trgigger on table which is based on updat of column. And in this trigger you can send a mail using plsql.
HTH

How to create Event Node in smartform

Similar Messages

Maybe you are looking for