How to create exact copy of a table
Hello,
I must admit my "google skills" have failed me and it is possible that I might be missing something obvious here but allow me to explain.
If I have a table that is populated/accessed by a typical OLTP application such that over time the data in the table may become "fragmented".
I know that is a very controversial term I used but that is not the question here. A simple way to describe the state of the table might be
that the table has always been populated with lots of small INSERTs, modified with lots of small UPDATEs and data has been deleted in small DELETEs.
This has meant that the data is neither closely stored in data blocks nor is in any particular order (so there are some empty blocks under HWM).
Now my question is how do I create exact copy of this table and its indexes AS THEY EXIST AT THE MOMENT that includes
1) its data
2) its constraints/indexes etc.
3) its storage parameters
4) data stored in EXACTLY same manner as in original table.
To avoid complications, the table in question is just a normal heap table without any partitioning involved. While CREATE TABLE AS SELECT (or CREATE
TABLE followed by INSERT) will take care of points (1) to (3) above, it will not achieve point (4) above.
Can somebody please help?
Thanks in advance.
Exp/Imp...
C:\Windows\system32>expdp scott/tiger dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables="emp" constraints=y indexes=y statistics=y
Export: Release 11.2.0.1.0 - Production on Sat Nov 24 15:35:34 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Legacy Mode Active due to the following parameters:
Legacy Mode Parameter: "constraints=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "indexes=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "statistics=y" Location: Command Line, ignored.
Legacy Mode has set reuse_dumpfiles=true parameter.
Starting "SCOTT"."SYS_EXPORT_TABLE_01": scott/******** dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables=emp reuse_dumpfiles=true
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."EMP" 8.570 KB 14 rows
Master table "SCOTT"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_TABLE_01 is:
E:\APP\SERVERROOM\ADMIN\ORCL\DPDUMP\SCOTTEMP.DMP
Job "SCOTT"."SYS_EXPORT_TABLE_01" successfully completed at 15:35:38
C:\Windows\system32>impdp scott/tiger dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables="emp" constraints=y indexes=y statistics=y logfile=log.txt remap_schema=scott:hr
Import: Release 11.2.0.1.0 - Production on Sat Nov 24 15:48:20 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Legacy Mode Active due to the following parameters:
Legacy Mode Parameter: "constraints=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "indexes=TRUE" Location: Command Line, ignored.
Legacy Mode Parameter: "statistics=y" Location: Command Line, ignored.
Master table "SCOTT"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_IMPORT_TABLE_01": scott/******** dumpfile=scottemp.dmp directory=DATA_PUMP_DIR tables=emp logfile=log.txt remap_schema=scott:hr
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "HR"."EMP" 8.570 KB 14 rows
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "HR"."EMP" ADD CONSTRAINT "FK_DEPTNO" FOREIGN KEY ("DEPTNO") REFERENCES "HR"."DEPT" ("DEPTNO") ENABLE NOVALIDATE
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Job "SCOTT"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 15:48:22
C:\Windows\system32>sqlplus hr/hr
SQL*Plus: Release 11.2.0.1.0 Production on Sat Nov 24 15:48:32 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from emp;
...Result is there.
14 rows selected.
SQL>
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
are understandable.Regards
Girish Sharma
Similar Messages
-
How to make a copy of a table in oracle?.
I have a table.
I would like to make an exact copy of the table (except for different name of the table) ..basically like a backup.
Thanks!SQL> create table new_table_name as select * from old_table_name ;will create the new table with data populated. You need to create any primary key/foreign keys, constraints and indexes afterwards.
if you are on 9i or later, you can also use dbms_metadata.get_ddl to get the complete ddl for the existing table and change the table name and constraint names to get exact structure as the old one. -
How to make a copy of a table?
I wonder how to get a copy of a table in apex.
At first I think there must be created a page process. The sql-code would be Create table "TABLE2" as select * from TABLE1. But the page process must be defined as an PL/SQL anonymous block and unfortunately my knowledge of PL/SQL is very small. Could anybody advise me which code for the anonymous block has to be taken for that?Imagine your accounting department runs a normal bookkeeping. There are some bookings which occur month for month or quarter by quarter. The accountant mourns that he has to give in always the same data and my idea is to tell him that we will take a second table with these repeating bookings and once a month he unions this table with the master table to get the complete ledger. But we cannot use the repeat-table itself because it may differ from month to month. So we have to take a copy table for one month and next month we need a new copy. This means that we have to provide 12 tables for a year with 12 regions what is not so horrible as it sounds as we can use hide&show regions.
Michael -
How to create an arrow in a table
How to create an arrow in a table in numbers.
If you have plus or minus numbers, I want to know a green arrow on the increase is positively or a red arrow if it is negative numberMaybe something like this?
-
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to create dependent LOV in Advanced Table.
Hi,
How to create dependent LOV in Advanced Table. Pls help send me the steps.
Thanks in Advance,
Hanimi....Hi,
Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
and for Dependent Poplist refer the below link:
http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
Regards,
Sudhakar Mani
http://oraclearea51.com/sudhakarmani -
SMARTFORM: how to create 3 copy (each copy can print more than one page)
SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 pageHello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM -
How to create IDOC for customer defined table
hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved. -
How to create a partition on existing table?
Hey
Could some one please tell me on how to create a partition on existing table?Could some one please tell me on how to create a partition on existing table?
You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
The choice will depend on how much data the existing table has and whether you can do it offline. -
How to create a copy of a project
We are using RoboHelp HTML version X5, and we use version
control. We are trying to figure out how to create a copy of a
project so we can edit the new version with the old version
remaining intact. That way we could have multiple versions of our
help system, a distinct version for each software release we have.
Thanks.The way I do it is rather simple.
1. Copy the local RoboHelp project to a new location.
2. Remove the link to source control. (See http://www.robowizard.com/RoboWizard/MonthlyScry/102004.htm on how to do this without opening RoboHelp. Please follow these instructions.)
3. Open the RoboHelp project and add it to source control as a new project.
By creating a copy of the entire project directory, ALL the content is retained.
Greet,
Willam -
[ADF Help] How to create a view for multiple tables
Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AMHi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon -
How to CREATE VIEW to merge two tables each of which has CLOB-typed column
I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advanceDong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d. -
How to create xml file from relational tables in 10gR2
Hi,
I am very new to XML and was wondering how to create an XML file from querying relational tables. Some child tables may contain multiple rows that need to be returned in certain instances. Other queries will just be single or multiple rows from one or more tables. I would like to use the latest feathers in 10gR2. Thanks for any help you can provide.
Thanks,
LeeHere is the first row of data created from our person table - it used the column names as the tag names:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<MP_ID_SEQ>289</MP_ID_SEQ>
<MP_NAME>LOBERG,JUDITH LEE</MP_NAME>
<MP_SEX>F</MP_SEX>
<MP_RACE>I</MP_RACE>
<MP_DOB>19500709</MP_DOB>
<MP_HT>504</MP_HT>
<MP_WT>170</MP_WT>
<MP_EYE_CLR>BLU</MP_EYE_CLR>
<MP_HAIR_CLR>BRO</MP_HAIR_CLR>
<MP_SKN>RUD</MP_SKN>
<MP_SMT>POCKMARKS</MP_SMT>
<MP_SOC>517607968</MP_SOC>
<MP_OLN>517607968</MP_OLN>
<MP_OLS>MT</MP_OLS>
<MP_OLY>2007</MP_OLY>
<MP_CAUT_MED>70</MP_CAUT_MED>
<MP_VISION_SCRIPT>C0RRECTIVE LENSES</MP_VISION_SCRIPT>
<MP_DNA_AVAIL>N</MP_DNA_AVAIL>
<CREATED_BY>MMPS</CREATED_BY>
<DTM_CREATED>31-AUG-06</DTM_CREATED>
<MI_INC_ID_SEQ>288</MI_INC_ID_SEQ>
<MP_ALERT>N</MP_ALERT>
</ROW> -
How to create a attribute for a table
I am created a table with four columns.
How to create a attribute for each column.........Hi Cranjith Kumar,
First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
Reward points if useful.
Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM
Maybe you are looking for
-
How do I install Cs3 from disk, after trashing the trial version?
I've made the mistake of trashing the trial version of Cs3 that I had on my imac a few years ago. Now I'd like to install photoshop cs3 on my imac as my other computer is out dated and I get the error message that CS3 is conflicting with CS3 on the c
-
Unable to run a RTSP stream in j2me
Hi there, I want to run RTSP clip on J2ME. I tried code from following site: http://developers.sun.com/techtopics/mobility/midp/articles/mmapioverview/ It is running the http:// clip given in site but when i am trying to run a rtsp:// clip it does no
-
You should run a new contract selection for item 0000000010
Hello Friends i am trying to create a service request from WEB IC by confirming Account and Ibase and able to create without error. if i end session and open the service request in change mode and if delete the ibase and save, then appeas the below m
-
Hi Gurus, I am having two plants defined in one company code. Is Planned order number range plant specific? My planned order number range in plant-1 is 1000-2000 and it is same in the Plant-2. If I create the planned orders in both plants. What is st
-
Using JSPs and passing data from 1 page to the next
I have an application which has a number of JSPs. JSP1 has some fields and buttons. One of these buttons is called 'Print'. On pressing this control is passed to the next JSP2. In this JSP the data is displayed from the database. It is displayed via