How to create execution plan in DAC and how to start ETL steps

Hi,
For ETL configuration i have installed and configured,
1. Oracle 10G DB
2. obiee and obia 7.9.6
3. informatica server (here i created repository and integration services)
4. DAC server 10g (setup for DAC is also configured like create warehouse tables etc.,
same installation done on windows for client.
Now i'm struck with execution plan creation.
then
how to start ETL, where start ETL
Source : Oracle EBIZ R12.1.1
target : Datawarehouse (10G DB)
please help me out the steps till ETL start ?
Thanks,
Srik

Hi Srik
I am assuming you have followed the steps required before a load in the library for dac config, csv lookups etc...
Did you check out the example in the documentation?
Here is the link
http://download.oracle.com/docs/cd/E14223_01/bia.796/e14217/windows_ic.htm#BABFGIHE
If you follow those steps and run the execution plan and you can monitor the progress under the current run tab in the dac and the infa workflow monitor.
Regards
Nick
Edited by: Nickho on 2010/06/21 9:24 AM

Similar Messages

How to create the servlet as acontroller and how to use it

how to create the servlet as acontroller and how to use it

>
John
Please update your forum profile with a real handle instead of "914824".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I am going to have over 50 buttons in a page, Why? This would be a most unusual UI paradigm. I've never seen such a page, which suggests that whatever you want to do is normally done another way. Please explain the requirement in more detail.
just wanted to know if its possible to do something like this in java.
Java is not used in programming APEX UI behaviour. Java and JavaScript may share initial syllables, but they are not closely related.
It's possible to achieve a great deal in JavaScript, but a clear definition of the requirements is necessary. Do you mean the buttons should be dynamically generated? If so, yes, this is possible in JavaScript. What would drive the process?
Also, i would like to have dynamic action on it, for example, when the button is pressed, fill a string of text into other items(text field) within the page. Without more detail its not possible to make any specific suggestions. For example, I certainly would not want to create 50+ individual dynamic actions relating to different buttons.

How to create documentation for report programs and how to use it

how to create documentation for report programs and how to use it in the selection screen by placing an icon in the Applicatin Tool bar. If i click this icon the help documentation has to display.
Note: Exaple <b>RSTXSCRP</b> programs selection screen

Hi
1 goto SE38 transaction, give the program name
2 Click on documentation radiobutton & then press change
3 Write your PURPOSE, PREREQUISITES etc details
4 Save the same & Activae it.
The icon will come automatically on selection screen
Thanks
Sandeep
Reward if useful

How to create Implicit Fact column ?and how to use it ?

Hi all,
How to create Implicit Fact column ?
and how to use it ?
Thanks in advance

When you create a request with only dimension columns, the Oracle BI engine has to choose a fact table to join the dimensions to each other. If you have multiple fact tables in your BMM layer, the Oracle BI engine will use the most economical fact table, depending on the number of dimensions of the fact table.
In some cases you do not want to use this fact table, but you want to force the Oracle BI engine to use the fact table you want.
In that case you should create a fact (or select an existing fact) of the fact table you want to use for the dimension only query. In the presentation catalog of the subject area you should select this fact as the implicit fact. This fact will always be used in the query, but it won't be visible in your report. An example of an implicit fact is the count of the primary key (id) of the fact table.

How to create an array of JButtons and How to implment it ...

This is what i want to do - I want to create an array of JButtons that has 8 rows of 8 buttons, could someone help me with this (im creating a checkers board) all i need is the array of buttons and them in 8 rows of 8 buttons .... im pretty confident in the way of making them do what i want but need help getting it up and running .... please note it is to be done in the swing environment and not in a applet or anything - ie in a JPanel and a JFrame .... any help would be GREATLY appreciated.

U can try this
        JButton b[][] = new Button[8][8];
     setLayout(new YourLayout());
     for(int i =0; i<8; i++)
          for(int j =0; j<8; j++)
               b[i][j] = new Button("Test");
               b[i][j].addActionListener(new YourAction());
               add(b[i][j]);
     }

How to create a new company code and how to assign it to billing units?

i am working on roll out project.....please help me in creating a new company code....

Hi,
You have raised this query in wrong Forum. Please raise ur query in the relevant forum.
rgrds,
Randhir Soni

How to create a file in memory and how to open it?

Hi All,
Warm greetings...
I bundle a file in encrypted form with my project's distribution. User may need to see this file while working on it. I want to load this file in memory, decrypt it there and then display its content to user in read only form.
Is there any way to do this.
Best

Christi wrote:
I bundle a file in encrypted form with my project's distribution. User may need to see this file while working on it. I want to load this file in memory, decrypt it there and then display its content to user in read only form.
And what happens if the OS swaps your application to hard drive while the user goes to lunch? Is that or is that not a problem?
In some business domains that is a problem and in others it isn't.

How do I create custom execution plan in DAC

Hi,
I need to create custom execution plan in DAC to load data into set of tables. actually schema we are building having 2 custom dim tables, 8 OOTB tables (Fact and Dim). So I need to copy existing OOTB execution plan, remove unwanted tables, tasks ect and rebuild. But I don't know exact process to do that Could you please provide step by step details?
We are using OBIEE 10.1.3.4.1, BI Apps 7.9.6.1 and DAC client is on windows XP.
Appreciate your help!
Thanks
Jay.

Hi,
I created new container which is a copy of Siebel 8.1.1 and then created new subject area, in tables child tab added one fact table and then clicked on assemble and clicked on save button. I got the message saying it is successfully assembled. I did checked tasks, and related dim tables cant see any for this new subject area. and another strage thing is I navigated to execution plans and again clicked on design tab now I cant see new subject area. when I try to add it again it is saying subject area with that name already available but I cant see it there. I did this twice but not able to fix the problem.
Appreciate your help!
Thanks
Jay.

How to find the time taken for creating execution plan alone

Hi,
Is there any way to find out the division between the time taken for query parsing, creating execution plan and actual data retrieval seperately? If I enable 'set timing on' I see the elapsed time which is the total time taken for all these 3.
Some of my queries are taking long time when I run it first time and so want to know what is it taking long, is it the parsing the query or creating the execution plan? (Since my queries run faster second time, I am assuming the major part was for parsing or creating the plan but not the data retrieval).
Also, where does Oracle keep the execution plan? Is it in the BUFFER_CACHE? if so, I tried flushing the buffer_cache and restarting the DB as well, but still the query execution seems faster compared to the first time. How long does Oracle keep the execution plan in the cache and is there anyway to increase this cache size?
Thanks in advance!

user13169027 wrote:
Hi,
Is there any way to find out the division between the time taken for query parsing, creating execution plan and actual data retrieval seperately? If I enable 'set timing on' I see the elapsed time which is the total time taken for all these 3.
Some of my queries are taking long time when I run it first time and so want to know what is it taking long, is it the parsing the query or creating the execution plan? (Since my queries run faster second time, I am assuming the major part was for parsing or creating the plan but not the data retrieval).
The ideal way for finding the answer to your questions above, would be to perform a (sql) trace of your query executions. To see the difference in the trace-files, you might want to trace the first execution in one session, and the second execution in another session: so you get two different trace files, which you can then seperately tkprof, and investigate.
Also, where does Oracle keep the execution plan? Is it in the BUFFER_CACHE? if so, I tried flushing the buffer_cache and restarting the DB as well, but still the query execution seems faster compared to the first time. How long does Oracle keep the execution plan in the cache and is there anyway to increase this cache size?
Execution plans are held in the shared-pool, not the buffer-cache. As far as I know they will be kept in memory in an LRU way (least recently used), just like db-blocks are in the buffer-pool (I know this is not entirely correct, but for all practical purposes, think of it this way).

How to create Billing Plan in sales order using Function module /BAPI

hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???

Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay

How to create a gui pf status and guititle in module pool programming?

hi frnds,
how to create a gui pf status and gui title in module pool programming?
my problem is i created a screen and wen execute the screen by a tcode.am nt able to activate SAVE BACK EXIT CANCEL COMMANDS?.how to do this can any one explain in detail procedure?
plz gve step by step process.

Hi,
For Title:In PBO...just write
SET TITLEBAR 'ZTITLE'.
double click on 'ZTITLE'....give whatever title u want...save it...activate...and check...reward points if useful...
PF means FUNCTION CODE
ex; set pf-status 'zrstatus'.
double click on the zrstatus expand the application server ,
at the time of execution the default menu(ie system,help),application toolbar buttons like enter,help etc and function keys(by default there will be no function keys)as are there on the normal
will appear on the screen.
Details:
PF-STATUS is used to set the GUI Status of a screen, ie you can control the options on your menu bar, application toolbar, the function keys assigned to various options etc.
Implementing the status for a screen can be done in 2 ways:
1) Create the GUI status using the object list of the program or by using the transaction SE41. Then, assign it to the screen using SET PF-STATUS statement.
2) Create the GUI status by means of forward navigation, ie, use the SET PF-STATUS 'XXX' statement where 'XXX' is the name of the GUI status and double click on it to create it.
Status names can have a maximum of 20 characters.
After assigning a GUI status to a screen, this is inherited to all subsequent screens. In order to have a different status for each of the subsequent screens, you have to set a separate status for each screen.
In transaction SE41,
1) Give the program name and the status name and click on the Create button.
2) Go to 'Function keys' and expand.
3) On top of the save icon type SAVE, on top of the back icon type BACK, on top the the exit icon type EXIT etc ie on top of all the icons that you want to use, type the respective names that you want to give.
Whatever you have typed now becomes the function codes of these icons and can be used in your program.
For example you have a screen 100.
In the 'Element list' tab of the screen, give "ok_code" as the name where "OK" is the type of screen element. Activate screen.
The flow logic for the screen looks like this:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Create the modules STATUS_0100 and USER_COMMAND_0100 in the main program by simply double clicking on them.
The code for these modules can be something like this:
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Example'. "Example is the name of the GUI status
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SAVE'.
"call a subroutine to save the data or give statements to save data.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
Regards,
Shiva Kumar (Reward If helpful)

How to create OEMS JMS In-Memory and File-Based Persistence?

Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
tks

Hi Mario
This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
Dominique

How to create OEMS JMS In-Memory and File-Based Persistence ? Anyone?

Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
tks

Hi Mario
This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
Dominique

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create execution plan in DAC and how to start ETL steps

Similar Messages

Maybe you are looking for