HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
HI ALL
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
PLEASE GIVE ME SPOON FEEDING
IT IS VERY URGENT FOR ME
PLEASE PLEASE AND PLEASE
REGARDS
ok i understood u want the img path for maintaing
positions ,jobs , Org units
Path:IMG->Personnel Mgmt->OM->Basic Setting->Maintain Number ranges.
IMG go to Personnel Management -> Organizational Management -> Basic Settings
-> Maintain Number Ranges.
Select subgroup $$O to maintain number range for Org Unit and click on Number range Maintenance. Then click on change Intervals. Now you can create both internal and external number range for Org Unit according to your requirement.
Similarly for Position select subgroup $$S and follow the same process.
Edited by: Sikindar on Feb 7, 2008 11:23 AM
Edited by: Sikindar on Feb 7, 2008 11:28 AM
Similar Messages
-
How to create a number ranges in QM notification?
Hi Exprets
How to create a number ranges in QM notification?
Please help me...
RamDeat Thyagarajan,
Notification type 01
Notification cat 05
Parameters
Notification origin General Notification
Catalog profile SAPISR
Early no.allocation 06 Number range
My Notification type 01, I am assined 06 number range. 06 number range have limit 1-100000.
I have used upto 100000. Now how I can extend my number limit.
Thanks for support...
Ram -
How to create a Number range?
Hi,
How to create a number range for a field to give our own number for a field?Hello,
Go to transaction SNRO.
Take a look at these: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-13] and [http://help.sap.com/saphelp_nw04/helpdata/en/7b/6eb2aa7aed44ea92ebb969e03081fb/frameset.htm]
Regards, -
How to create Alphanumeric Number Range
Hello Experts ,
I want to create a alphanumeric number range for vendor .
Could you please give some information on the the format to specify in Number range transaction ?
For Example :
How do I create CDPDM01DKK vendor
Regards
ShashankHI
create number ranges in XKN1.
define A to ZZZZZZZZZ and click the the ecternal number range
Then
Assign the number range to vendor account groups.
Check it out.
Path: SPRO- SAP IMG- Financial accounting- Accounts receivables and payables- vendor accounts- master data - preparations of creating vendor master data - create number range for vendor accounts
SPRO- SAP IMG- Financial accounting- Accounts receivables and payables- vendor accounts- master data - preparations of creating vendor master data - Assign the number range to vendor account groups
Check it out.
Regards,
Raman -
External Number Range for Billing Documents
Hi Friends,
Can any pls tell me how to create external number ranges for billing documents. We are trying to Map the Invoice nos from POS system to create and match the billing nos in both the systems. Pls help on how can I do this.
Thanks
RajCheck this thread
[Re: Customize Billing Number Format|Re: Customize Billing Number Format]
thanks
G. Lakshmipathi -
2 external number range for vendor
Hello,
I am facing a problem when I try to replicate vendor from R/3.
I have 2 external vendor number ranges maintained in SRM, But only the last created external number range is taken into account when i replicate vendors from R/3.
Please could you tell me how can I maintain 2 external number ranges in SRM?
This is very urgent, I need to replicate vendors from R/3.
SRM 4.0 Extended Classic scenario.
Regards,
ShaiekHi Lina
You will have to combine all number ranges in R/3 and create one number range in SRM, if you want to retain the R/3 numbers.
e.g. If your R/3 number ranges are
100000 - 200000
600000 - 699999
In SRM, you need 100000-699999 as the external number range.
At any point of time, you can make only one no. range as default in SRM.
Best regards
Ramki -
External Number Range for FT Legal Control
HI ,
I am doing coversion for FT Licence Master so I need to give External Number Range,
I have created External Number range 02 with Ext Check box but Still I am not able to enter External number manually in FT data as the Field is coming in Grey.
The purpose is I want to assign a OLD number genearted in Previous system. How can I do that ??Solved
-
External number range for measuring point
Hi experts,
How to assign external number range for measuring point ?
Regards
ShashiI have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
SAP documentation as follows:
Create Number Ranges for Measuring Points
In this step you define number ranges for measuring points.
Notes
As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
Jim
Edited by: JamesPetrie on Feb 28, 2012 2:45 PM -
External number range for rebate agreement
hi experts !!!
can we give
external number range for rebate agreement
e.g . ab0039
this number i want give for one of rebate agerrment
please guide
and is it possible the customer no and rebate agreement no are same
ponts will be rewardthanks friend
i already did this by creating external number range AAA -
ZZZZZZZ
and system allow me to give no like AB0056
and if now i create new record by VBO1
IF i give external no system accept
AND if i don't give system generate his own no
can u tell me exactly where i have to assign this number
but there is no number object LIKE in t.code VNO1 there is no 01 or 18 so that i can mention in sales document type
like......
so how and where i have to assign
points will reward -
External number ranges in LSMW
Hi all,
can anyone explain me that how to use external number ranges in LSMW.
I have to upload data using MM01 in LSMW.
one material number should be extended to 8plants.but the field values for some fields are varying.the material number should be same for 8plants
For this issue, which method i should follow.exteernal ranges means you are going to extend this material in all 8 plant.
material number remains same.
that means just you have to pass material number by yourself in upload.
upload file
material plant qty ................
1 plant1
1 plant2
1 plant 3
1 plant 8.
with this material 1 is extended in 8 plants.
reward if useful.
Amit Singla -
External number range for GR document
Hello,
1. Is it technically possible to create external number range for GR document (material document) - Note, PO is also having ext number range
2. Is it adviseable to create ext num range for material docs?
Thanks
Regardshi,
1. it is possible to create external number ranges for GR document.
in spro config settings: use transaction OMBT and in that enter a number range and check that external number range check box.
2. it is not advisable to have external number range for material docs --> because for every movement of the material end user has to giva an entry for material document.
hope this may help you,
regards,
srinivas -
External number range for material master
Dear sap guru i want to create external number range for msterial master but i am facing problem .i used T.code MMNR but i am not able to tick external number small squar window . can anybody help me and tell me step by step
regards
rohitHi
In tcde MMNR select groups in the application tool bar a pencil like icon click that
Then go to group in the top menu bar
In that if you choose insert
Then a dialogue box will open
In that give text and
there will be two lines
First is for internal no range
second is for external no range with the check box ticked in grey
In that you have to choose the second one and give only the range interval
External tick is already there ready made in the system
If you are sure that your settings are correct in MMNR
IMG-L.G-MATERIAL MASTER-BASIC SETTINGS-MATERIAL TYPE---DEFINE ATTRIBUTES OF MATERIAL TYPES
in this choose your material type and click on its details
in the general data tab there is a external no assignmentw/o check a check box is there
Pls tick that and try to do your process by giving external no
Regards
raja
Edited by: ramanathan raja on Dec 4, 2008 2:27 PM -
External number range for equipment number
Hi All,
How to maintain external number range for equipment number?( t-code IE01)
Thanks in advance,
SoumyenduDear ,
Go to...
spro -
pm/cs -
master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
Regards,
Ishwar -
PA04-How to make existing Number Range/interval external.
Question: PA04-How to make existing Number Range/interval external.
One of the Pernr Number ranges/interval in PA04 is Internal(box is
unchecked) and i want to make it "External" (check the box) to load some data.
Issue: The issue is, the check box is Greyed out and i can not check it. But i have access to
everything else in PA04:
- create and delete number ranges
- change the "Current number"
- Uncheck the box to make the External to Internal.
But i can not Check the box to make it External from Internal due to the greyed
out box for this number range.
The only solution i can think of about it is to - Delete the number range
and add it again and check the box when doing that. And once the Data load is done Uncheck the box.
Is there a better option..?Once you have made your decision to define a number range as 'internal' it is not possible to reverse this. check this http://scn.sap.com/thread/1976017
-
How to assign numbers in external number range?
Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AMWith external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.
Maybe you are looking for
-
Goods Return or AP Credit Memo Creation if AP Reserve Inv created
Hi All, Can anyone tell me how to create good return or ap credit note if ap reserve invoice is used. GRPO created with reference to ap reserve invoice always closed. Regards
-
Cannot connect to iTunes store after resetting and changing apple ID
I had forgotten the password to my apple ID so I figured I may as well change the password, which I did with no problem. However I can't log into the iTunes store from either my iPod Touch (5th generation, bought today), nor my application on the com
-
Hi, I'm a long-time user of garageband, but a problem has cropped up recently. When writing a song I generally go into iDrum (1.5.3), make a little pattern, and "export song as aif". This was all fine until not too long after updating to 5.1. I can't
-
This is driving me crazy. With today's huge file sizes it seem to me that for the majority of pictures a pixel count of 12-16 mega pixels y more than ok size for editing and make printings; for the professional jobs is a good idea to have the biggest
-
I can't see my songs in iTunes
I moved my iTunes to my new laptop and I cannot see my songs. I check the file path and it is the same as my old laptop. I have authorized my new computer. Windows 8 operating system. Can anyone help?