How to create external users in SAP EP as authenticated users

I am able to create portal users . I would like to know how to acccess automatically login as external users (stored in Cutomized table in CRM).

Rakesh,
acccess automatically login as external users (stored in Cutomized table in CRM).
Firstly, your question is a little unclear.
Where is your UME pointing to?
Go to http://<FQDN>:<Port>/irj/useradmin/index.jsp, click on configuration and check the datasource.
1. If it is for external users you could use anonymous logon
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/1aad4abcb98c4597f9e395a6b62f43/frameset.htm
2. If you want to use the users exisiting in the CRM system to logon to the portal, then you might have to point your UME to it.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7e/a2d475e5384335a2b1b2d80e1a3a20/content.htm
3. If you intend to use the users exisitng in a custom table in the CRM system, then I guess you would have to customize the UME Data Source .
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/content.htm
Hope this helps.
Cheers!
Sandeep Tudumu

Similar Messages

How to create general message in sap screen for all users

Hi Forum
I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc)
Can anyone show me how to do this and also i want to know what is sm02 is used for?
Regards
Friend

You can do this by creating a message at the logon screen
Read SAP Note 205487
SM02 is used to send system messages like prior a system downtime or a scheduled maintainance, etc.
regards
Juan

How to create system message in SAP EP?

Dear All,
How to create system message in SAP EP?
i need to find solution for this task. Is there any way without collaboration? For example in SLD there is "System message" without additional functions. Please help.
Portal installed on Netweaver 7.01 EHP1

Hi Abay,
You need to develop custom application to accomplished your requirement for system message in the potral.
Please have a look at "Brodcast messages to logged on users in Portal:
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Also you can develop system message in the KM and integrate in the portal.
Hope it will helps,
Regards, Arun Jaiswal

How to create new requisitioner in sap mm for raising purchase requisition?

How to create new requisitioner in sap mm for raising purchase requisition?

Hi Dear,
There is some link will help you to create Purchase Requisition and other MM Documents.
http://www.docstoc.com/docs/11307932/SAP-MM-Manual-Create-Purchase-Requistion
http://www.r3.duke.edu/training/stepbystep/#purch
http://sapdocs.info/sap/materials-management-2/download-sap-purchasing-user-training-ppt-material/
Regards
Aamir

How to create userdefined menus is sap b1

hai,
i have small doubt:
how to create userdefined menus is sap b1
thank u
nagababu

UI API provides two methods for creating and setting menus
Dynamically in Run Time
this method is used to add a dynamic menu to your add-on forms. The dynamic menu is updated each time a new form gets focus.
to use this method initiate the MenuCreationParams object and call Menus.AddEx to add the menu into the application.
XML Batch Operation
Use this method to load or update multiple menus simultaneously. In addition, this method allows reusing of your code in a resource-like manner to improve performance.
After creating the menus in your code, call Menus.GetAsXML to get the entire SAP Business One menu structure in an XML file and call Application.LoadBatchActions to load the XML file instead of calling specific Add methods in your code.
hope u will get idea abt creation of user-define menus..
Nirdesh

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to creat purchase register in SAP r/3 system?

Dear All,
Please tell me how to creat purchase register in sap R/3 system.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

Proceedure of how to create a logo in SAP R/3

Dear Techie's,
Please tell me the Proceedure of how to create a logo in SAP R/3 and how to include in the ALV.
I suppose its to be included in the ALV_comentary_write function module.
Please guide me in full.
Regards,
-=Virendra=-

HI,
Please follow below steps
(1)Create a class name
SBDSV1 (TRANSACTION) --> New Entries --> Class name (SOME NAME) --> Class type (OT).
2)After entering the above details and saving, the fields Class object name fields   will be blank, make entries as shown below .
1)     Class : BDS_LOC1
2)     Class : BDS_POC1
3)     Class : BDS_REC1
4)     Object name : BDS_CONN00
3)- Now next time logging in to OAOR you can directly refer to this Class name.
4)1)     Go to transaction OAOR, give the class name created.
   2)     Give class type as OT
   3)     Give some name in object key its like sub folder
5) a) Click on create drag down standard doc types will get no. of option chose one
    b) double click on the class name in this new screen.
    c)in the below screen are, you have tabs for details,documentinfo,keywords,create, click on create TAB,
   d)By double clicking on screen you can browse the folder where image is located and select it
   e)Once the image is selected it will be stored in the folder that is created with object key
6) now double click on the image you uploaded & in below screen area select the Details tab, you will get object id,use this object id & code as below
7)form FILL_EVENTS .
DATA: wa_events TYPE SLIS_ALV_EVENT.
CLEAR: LS_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   IMPORTING
     ET_EVENTS             = LS_EVENTS
wa_events-form = 'STD_TOP_OF_PAGE'.
MODIFY ls_events FROM wa_events TRANSPORTING FORM WHERE NAME =
'TOP_OF_PAGE'.
CLEAR: wa_events.
endform.                    " FILL_EVENTS
FORM STD_TOP_OF_PAGE.
DATA: it_listheader TYPE SLIS_T_LISTHEADER,
       is_listheader TYPE SLIS_LISTHEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_listheader[]
     I_LOGO                   = 'ZTEST' "this is object id mentioned in 6 step
    I_END_OF_LIST_GRID       =
ENDFORM.
Regards,
Raghavendra

How to create report writer in sap?

Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

How to create a condition in sap

Hi all,
How to create a condition in sap
i want to create a condition in sap quotation. how to solve this issue please give me idea step by step.
[http://www.4shared.com/document/MQiBd3bP/screenshot.html]
Thanks & Regards
Ambrish
Edited by: ambrish dwivedi on Feb 28, 2011 12:29 PM
Moderator message: not related to ABAP development, please do some research before asking.
Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

Hello Ambrish,
Which condition are you talking about ?
is it the calculation you want to do in ur driver program or kind of routines which are used in Pricing ?

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to create a map in SAP BI???

Dear SAP BI Experts,
I have a difficulties to make a map in BI and missed the steps procedure how to create a map. I have an ESRI CD Map and Arc VIew application. What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
So sorry for stupid question!!!
Thank you very much for your time and help.
Best Regards,
Rudy (SAP BI Team)

Hi Nirmansyah,
Please check the below link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
Hope this helps.
Veerendra.

HOW TO CREATE EXTERNAL NUMBER RANGE IN OM

HI ALL
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
PLEASE GIVE ME SPOON FEEDING
IT IS VERY URGENT FOR ME
PLEASE PLEASE AND PLEASE
REGARDS

ok i understood u want the img path for maintaing
positions ,jobs , Org units
Path:IMG->Personnel Mgmt->OM->Basic Setting->Maintain Number ranges.
IMG go to Personnel Management -> Organizational Management -> Basic Settings
-> Maintain Number Ranges.
Select subgroup $$O to maintain number range for Org Unit and click on Number range Maintenance. Then click on change Intervals. Now you can create both internal and external number range for Org Unit according to your requirement.
Similarly for Position select subgroup $$S and follow the same process.
Edited by: Sikindar on Feb 7, 2008 11:23 AM
Edited by: Sikindar on Feb 7, 2008 11:28 AM

How to create interactive map in SAP Visual Business using SAP UI5 SDK

Hi,
Please tell me,
How to create interactive map in SAP Visual Business using SAP UI5 SDK.
Is it possible to create interactive map using VB Control in SAP UI5 SDK..?
if possible please any one let me know.

Hi folks, one question:
We have our development close moved and now it is earlier than originally planned.
That means that we maybe can't finish our convenient API and you have to wait till we will release it - early 2015 is planned.
But there is another option:
Currently we have a API based on json. The developer has to create json and to transfer it to the Visual Business control.
This interface is more used as a low level API and we are developing on top the more convenient one. So all the features are the same.
It will stay stable & compatible in the future and you can build on it.
Do you want to use this interface?
Then I will publish the documentation.
Let me know.
Thanks

How to create external users in SAP EP as authenticated users

Similar Messages

Maybe you are looking for