How to create Extra Freight Unit for LCL Forwarding Order in Web Version of SAP?

Hi,
Can anyone please tell me how to create Extra Freight Unit in LCL Forwarding Order. Normally, each LCL Forwarding Order has one Freight Unit. But, if there are two types of Dangerous Goods and need to be transported via separate containers. Obviously, it should have separate Freight Unit to be created in the system. But, even adding package in Items Tab, unable to create Freight Unit for LCL order. Is there any other way to create Extra Freght Unit?

Hi Aaron,
When the FWO saving, it would build the freight unit auotmatically.
The filed "Document Type" in FUBR is used to specify the FU type.
So the FWO build the FU base on the FUBR which maintain in the FWO type.
Useful link for FUBR :
http://help.sap.com/saphelp_tm80/helpdata/en/5a/6749c4614f46e2a12160c775ff19de/frameset.htm
Best Regards
Clark Huang

Similar Messages

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

How to create one GR document for mutiple Purchase orders

Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.

Dear Tanuj,
Both Rama & Stephen are correct.
You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
In MIGO, after putting the PO press,enter, again give the next PO of that vendor .
If this solve your problem, close the issue.
With Regars,
Krishna Reddy

How to create a single delivery for two sales orders?

Hi Experts,
I need to create one delivery for two sales orders. But it fails.
The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
It not happened because of incoterms.? different dates
Kindly help regarding this.
Thanks
Raghu

Prerequisite for Grouped delivery
1. Header data should be same like Inco terms,Payment terms
Go to VL10A
Enter the sales order Numbers and execute
Select the sales order Nos for the group delivery and select "Background" Tab in Tool Menu Bar
If delivery is created coloured line items will get generated
Check the log for delivery docuements
Check and confirm
Senthils

How to create PMCO table entries for few PM Order

Hi Experts
By a lack of Customizing we have used for few day a PM order type without the flelds AFKO-KLVARP and AFKO-KLVARI set.
For this missing setting no entris had been created during Creation and Confirmation in PMCO and PMCOQT tables.
Now I've filled teh fields with a Zreport on AFKO table, but now I need to create the PMCO* data using RIPMCO00 report.
Unfortunately it doesn't work. Is there a way to re-build this missing datas ???
Thanks for your help.
Claudio
Edited by: Claudio Carrara on Feb 15, 2012 3:48 PM

Run the program RIPMCO00, has no effect because tables PMCO and PMCOQT are empty for these order.
This hapepns becuase when the Order was confirmed, teh fields AFKO-KLVARP and AFKO-KLVARI was null.
Now I've fixed these fiels, and I need to rebuild PMCO datas, burt report doesn't work because PMCO and PMCOQT tables are empty.
I need to create PMCO and PMCOQT entries in advance.
How I can proceed ???
Thanks
Claudio

How to create an outbound delivery for an repair order (RA)

Hi Guys,
Please let me knoe the steps to outbound delivery. Now, i have created repair order and inbound delivery, request you to explain on further stps.
Thanks in advance.
Shankar

Hi,
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/0d/fa0a415e37d349e10000000a1550b0/frameset.htm
Regards,
Gayathri

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a account key for application type M ?

Hi Guys,
How to create a account key for application type M ? and link the same with
Gl account.
thanks.

Hi
Please create the account keys or transaction keys in
SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
Thanks & Regards
Kishore

How To Create On Submit Button For Master_detail Page ?

I have adf page that is master And detail view.
i want to have one submit button for master and detail block

Duplicate of How To Create On Submit Button For Master_detail Page ?
Please don'r post your question multiple times.
Timo

How to create Extra Freight Unit for LCL Forwarding Order in Web Version of SAP?

Similar Messages

Maybe you are looking for