How to create field in transaction PPOME

Hi,
I would like to create a field in transaction PPOME - tab "work schedule".
This TAB displays infotype HRP1013. We would like to add a customer field to this TAB.
We already tried to use transaction PM01 and PPCI.
Regards,
Priscila Ramos

First of all thank you for your kind help.
I've customized a new tab for the Scenario OMEO0 and object TYPE S.
I don't know what to choose in field TAB PAGE in order to display addicional fields that i've already created using PPCI->EXTEND for IT hrp1013...
Here's what I need.... I created a new field using to proccess i said... I need it to be displayed into the already existing tab in ppome or in a new tab called something like 'addicional fields'
I look forward to hearing from you!
Regards
Priscila

Similar Messages

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

How to create new RF transaction in R/3?

Hi Guys,
Can anyone tell me how to create new RF transaction In WM. If possible step by step.
Thanks heeps.
Narahari

Hi again,
well if you need it for an infoObject ZMATERIAL,
Create the infoObject ZMATERIAL with reference to 0MATERIAL and you will have all 0MATERIAL hierarchies available for ZMATERIAL.
Nothing additional necessary.
The creation of similar Hierarchy-Extractors in R/3 is, as far as i know, not possible.
The proper order for the FF-Elements when uploading the self-defined hierarchy depends on the hierarchy-settings in the DataSource, for instance for sorted hierarchies:
Node ID     NODEID     NUMC     8
InfoObject Name     INFOOBJECT     CHAR     30
Node Name     NODENAME     CHAR     32
Link Name     LINK     CHAR     1
Parent Node     PARENTID     NUMC     8
First Subnode     CHILDID     NUMC     8
Next Node Along     NEXTID     NUMC     8
Language Key     LANGU     CHAR     1
Description - Short     TXTSH     CHAR     20
Description - Medium     TXTMD     CHAR     40
Description - Long     TXTLG     CHAR     60
Look also for the Function module for the FTP in se38 by FTP.
hth
cheers
sven

How to create field catalog using field-symbols in normal alv report?

hi all,
how to create field catalog using field-symbols in normal alv report? i.e, using function modules...reuse_alv_list_display/grid_display?
regards,
jack

HI
LIKE THIS
TYPE-POOLS : slis.
DATA : t_fieldcat TYPE slis_t_fieldcat_alv,
       st_fieldcat TYPE slis_fieldcat_alv.
st_fieldcat-fieldname     = 'STATUS'.
st_fieldcat-seltext_l     = 'STATUS INDICATOR'.
st_fieldcat-outputlen     = 17.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'VBELN'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Sales Document No.'.
st_fieldcat-outputlen     = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUDAT'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Document Date'.
st_fieldcat-outputlen     = 10.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'VBTYP'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Document Type'.
st_fieldcat-outputlen     = 4.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUART'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Category'.
st_fieldcat-outputlen     = 1.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'AUGRU'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Reason'.
st_fieldcat-outputlen     = 3.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'NETWR'.
st_fieldcat-do_sum        = 'X'.
st_fieldcat-seltext_l     = 'Net Amount'.
st_fieldcat-outputlen     = 15.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
st_fieldcat-fieldname     = 'WAERK'.
st_fieldcat-do_sum        = ' '.
st_fieldcat-seltext_l     = 'Unit'.
st_fieldcat-outputlen     = 5.
APPEND st_fieldcat TO t_fieldcat.
CLEAR st_fieldcat.
*sortinfo
st_sort-fieldname = 'AUART'.
st_sort-up        = 'X'.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBTYP'.
st_sort-up        = 'X'.
st_sort-subtot    = ' '.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'WAERK'.
st_sort-up        = 'X'.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
st_sort-fieldname = 'VBELN'.
st_sort-up        = ' '.
st_sort-subtot    = 'X'.
APPEND st_sort TO t_sort.
CLEAR st_sort.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     i_list_type     = 0
   IMPORTING
     et_events       = it_eventcat
   EXCEPTIONS
     list_type_wrong = 1
     OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF grid = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
     I_INTERFACE_CHECK                 = ' '
     I_BYPASSING_BUFFER                = ' '
     I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = g_program
      I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
     I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
     I_CALLBACK_HTML_END_OF_LIST       = ' '
     I_STRUCTURE_NAME                  =
     I_BACKGROUND_ID                   = ' '
     I_GRID_TITLE                      =
     I_GRID_SETTINGS                   =
     IS_LAYOUT                         =
       it_fieldcat                       = t_fieldcat
     IT_EXCLUDING                      =
     IT_SPECIAL_GROUPS                 =
      it_sort                           = t_sort
     IT_FILTER                         =
     IS_SEL_HIDE                       =
     I_DEFAULT                         = 'X'
     I_SAVE                            = ' '
     IS_VARIANT                        =
     IT_EVENTS                         =
     IT_EVENT_EXIT                     =
     IS_PRINT                          =
     IS_REPREP_ID                      =
     I_SCREEN_START_COLUMN             = 0
     I_SCREEN_START_LINE               = 0
     I_SCREEN_END_COLUMN               = 0
     I_SCREEN_END_LINE                 = 0
     I_HTML_HEIGHT_TOP                 = 0
     I_HTML_HEIGHT_END                 = 0
     IT_ALV_GRAPHICS                   =
     IT_HYPERLINK                      =
     IT_ADD_FIELDCAT                   =
     IT_EXCEPT_QINFO                   =
     IR_SALV_FULLSCREEN_ADAPTER        =
   IMPORTING
     E_EXIT_CAUSED_BY_CALLER           =
     ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = it_final
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
REWARD IF USEFULL

How to create Field Set in flex

I need to know best way to do create Field Set as following
You can see the HTML field set reference from here..
HTML CODE
<form>
<fieldset>
    <legend>Personalia:</legend>
    Name: <input type="text" size="30" /><br />
    Email: <input type="text" size="30" /><br />
    Date of birth: <input type="text" size="10" />
</fieldset>
</form>
So,how can I do it?

This link should set you off on the right track.
http://livedocs.adobe.com/flex/3/html/help.html?content=layouts_08.html

How to Create Field Catalogs (More than one Source Table)

Hi Data Archiving Experts,
Could you please help me how to create the Field Catalogs (More than one Source Table). If any one is having example that will help.
My scenario:
Currently we are archiving on CRM Data archiving project. We are facing one issue on creating field catalog with more than one source table.
Ex: ST -- BP1
BP2
BP3
ST info store in one table and BP1 -- BP 3 info sotre in another table. with current field catalog we are getting ST -- BP1. Our requirment is we need to show the ST -- BP3 How we can achive this.
Regards,
Srini

Hi,
I don't think its possible to create fieldcatalog for different tables,
but if you want to do so create a dummy table which has all the fields which you want in fieldcatalog.
populate the data from different table to that dummy table
then create fieldcatalog for that table and pass it in the function module...
Regards,
Siddarth

How to create R/3 Transaction Iviews in EP

Hi Experts,
I want to create R/3 Transaction Iview in EP.
So can any body guide me step by step procedure for it.
Regards,
DS

Hi DS,
To create a transaction iview u need to create a system object first.It contains the details of the system u want to connect to from portal.In your case u need to give the details of your R/3 system in the system object.
To create system object goto SYSTEM ADMIN>SYSTEM CONFIG>SYSTEM LANDSCAPE>PORTAL CONTENT>JUST RIGHT CLICK ON UR FOLDER (SYSTEM FROM TEMPLATE)just select that and from the available templates select -->SAP SYSTEM USIN DEDICATED APPLICATION SERVER.just give the name for the system object.
Now goto the properties of the system object select the property CONNECTOR
and fill in the following fields:
APPLICATION HOST:
GATEWAY HOST:
GATEWAY SERVICE:
REMOTE HOST:
SAP CLIENT:
SYS ID:
SERVER PORT:
SYS TYPE:
save them and now select the property USER MANAGEMENT and fill the fields
AUTHENTICATION TICKET TYPE:sap logon ticket
LOGON METHOD:UDPW
USER MAPPING TYPE:ADMIN,USER
To make the sys object being identified by the portal we declare alias name in display select SYSTEM ALIASES give alias name and save.
Now goto user admin select the user to map the portal user to the sys object.
select the property USER MAPPING FOR SYSTEM ACCESS.
In that u coula find the list of available system aliases select your alias and give user id password.
goto content admin>portal content>folder> new iview>sap transaction iview>sap gui for windows>select ur alias name and give the transaction code.
Regards,
Til;ak

How to create a new transaction type to create Lead

I have tried to to create a new transaction type to create Lead. But after putting all the relevant data an error showing "Enter an Organizational Unit(Sales)" is reflected.Can't really find out what kind of Error is this and how to fix it?

Hi,
Maybe you must assign this org. in partner tab.
Best regards,
Caíque Escaler

How to create a Z transaction for CJ29.

Hi All,
I have a requirement to create a Z transaction for CJ29 as ZCJ29 with some changes to the screen like providing option for saving variant and selection multiple project definations.
But when i checkt the Proram by following System->status->Program in standard transaction CJ29. It is having many includes.
Can anyone tell what all needs to be considered to copy the screen and which are includes to be considered for this CJ29 transaction?
Regards,
Nitin.

hi nitin,
u need create a transaction variant in SHDO tcode.
where in u provide the standard transaction along with your ZTCODE and select CREATE it shows the relevant tcode and if u press on any key or press enter it will take you to the variant screen having all the screen elements of the tcode.
Here u can select the particular field u want to make as input only, invisible, as output only etc. check the check box & Presson
Exit and Save Pushbutton and save the changes in a local object.
know run your tcode. u shall c the changes made to the std tcode.
or else you don;t want any changes on the screen, then follow the steps mentioned abv by others ...
Hope u got the idea...
All the Best !!!
Thanks
Ravi

How to Creating Field EXIT

Hi,
Please tell me the step by step procedure for creating Filed Exit

Hi Mohan,
This will be too useful for u...
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
            Step 1: Determine Data Element
            Step 2: Go To Field Exit Transaction
            Step 3: Create Field Exit
            Step 4: Create Function Module
            Step 5: Code Function Module
            Step 6: Activate Function Module
            Step 7: Assign Program/Screen
            Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press F1 for field-level help.
Click on the Technical info pushbutton (or press F9) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the Continue pushbutton.
- Now, you will be able to create the function module associated to the data elements field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the Continue pushbutton.
- In the Function module field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elements field exit must be created without an identifier.
- To create the function module, click on the Create pushbutton, choose menu path Function module -> Create, or press F5.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing Enter, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modules attributes screen, click on the Source code pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exits function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the Assign prog./screen pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the Fld. Exit field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to Active and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Set the above config in Tcode RZ11

How to create varient for transaction code

hello expert,
I created one Mod. pool program and transaction code.
while run this tcode, Save button is disable and unable to create varient.
could you please guide me hw to enable this save button and create varient. please
with best regards
srinivas

Hi,
You can create variants for transaction using transaction variants. That is meant to simplify these kinda scenarios.
The tcode for transaction variants is SHD0. You can create variants as you wish. It is simple only. No coding required. Just take SHD0. Give your transaction name.
Then press create variant.
It will guide you.
Regards,
Renjith Michael.

How to create a new transaction and add it to Area Menu

Hi.
I have to create a report and run the report using the Tcode and Tcode has to be added in the Area Menu at the initial screen.
Please tell me how can i do that.
Thank you in advance

You can add additional menu transaction in the SAP main menu without affecting the original SAP default area menu S000.
For example, you have created a transaction code called ( z123 - ABC Own Report ) and you want to insert it under Logistics. The specific user will be able to access ABC Own Report by clicking Logistics -> ABC Own Report.
Steps :-
Goto Transaction SE43 - Area Menu
Click the copy button. Copy from S000 to ZXXX
After copying, click Change (area menu ZXXX)
Double click on Logistics and add in your transaction code in the AreaMenu.
Remembers to Activate it.
Next Goto Transaction SU01 - Maintain users
Type in the user name and click the Defaults button
Type in the area menu (ZXXX) in the Start Menu field.
Click Save
The user will be able to see the additional transaction on the next logon.
The CUA area menus are converted to tree navigation in Release 4.6A. The menu contents are automatically copied into a new data structure in Upgrade to Release 4.6A or higher. You can edit Area Menus with a new maintenance interface (Area Menu maintenance transaction: SE43 ).
Reporting Tree Integration - Only transactions could previously be put in Area Menus. From Release 4.6A you can also put all the types of reports which are in reporting trees, in Area Menus. The system automatically assigns a transaction code to call the report from the menu. If you have already put the report in another Area Menu, no new transaction code is generated, the unique transaction code already assigned is used.
You can create Area Menus from complete reporting trees with the migration transaction RTTREE_MIGRATION . The report transaction codes are generated automatically.
Reporting trees can only be displayed. They cannot be maintained. To modify the contents of reporting trees, you must convert them with the migration transaction. You can then modify the contents with the Area Menu maintenance.

How to create object through transaction snro

Hi ,
   I want to create an object through Snro transaction.
I dont know how to use this transaction.
Please Help.
Thanks in advance.
Nikita

Nikita,
Based on the transaction code, respective function consultant will create number range.
If u want a number series for some other purpose in ur program u can create object in snro as below.
1. Enter a object name and click 'CREATE' button
2. In the next screen give relevant description
3. In 'Number length domain' field u can specify the length of number .. example if u give char10, then it will be a ten digit number series.
4.Enter warning percentage.. the purpose is to throw warning message 10 % before when ur number series about to exhaust.
5. After entering those details --> press save button.
6. Again come to main screen (SNRO initial screen) then click number raneg tab inthe application tool bar.it will take u to next screen.
7. In that click internal change push button
8. IN the resulting screen enter ur number range series,
example
01     00000001     09999999
02     10000000     19999999 etc
9. click save button..NOw ur number series is ready for use.
Regards,
Aswin.

How to create field with LEADING sign?

I have a request to create an output file that has any negative signs in a leading position. Example, value is 100.00- but we want it stored/displayed as -100.00. Anyone know if there is a FM (could not find one), etc. that does this? Thanks!

I don't know of any FMs that will do what you want.
There are, however, several ways of doing this using the WRITE command to transfer a number to a character field. This is all you really need, since you say you are filling a field of a structure you will be downloading to an external file.
1) You can try the <b>USING EDIT MASK <mask></b> additions to <b>WRITE</b>.
2) You can use <b>SHIFT <field> CIRCULAR RIGHT</b> to move any sign that exists to the beginning of a character field. This is all the formatting you need to give Excel a negative number it can parse. Other end user programs may require more work to remove the gap between the "-" and the digits of the number.
I've found (2) to be a better approach. Good luck!

How to create loosely coupled transaction branches with DBMS_XA ?

Hello,
I use DBMS_XA to start several sessions in the same database instance participating a global transactions. The local transaction branches are tightly coupled.
Do you know a way (Oracle 11.2) for the branches to be loosely coupled by using dbms_xa in one-only instance ?
Best Regards,
Gregory

For non XA datasource create a JDBC Connection with data source class
oracle.jdbc.pool.OracleDataSource
For xa datasource create a JDBC connection with data source class
oracle.jdbc.xa.client.OracleXADataSource

How to create field in transaction PPOME

Similar Messages

Maybe you are looking for