How to create files with read/write privileges for everyone?

I have two iMacs 7,1 (one with Snow Leopard and the other with Mountain Lion) in a local area wireless network.
I have shared the "documents" folder in the Snow Leopard iMac in order to have files available to the other iMac. The folder has read/write privileges for everyone.
When I create a new file in the shared "Documents" folder (for example a new Open office document, or a Keynote presentation) this file is by default "read/write" for the Administrator but only "read" for all the other users, so when I try to open it from the other iMac, I am informed that the file is "read only".
I can obviously change the privileges of the file in the information window, but I have to do on a file per file basis and this takes too long.
Is it possible to change settings in order to create files which are always "read/write" for everyone?
And, secondly, since I have several existing files whose privileges I should manually change one by one, is it possible to make global changes of their privileges?
Thanks in advance
Best regards

couple of different changes - 1st, if you want to share folders, doing your whole documents folder is not the best way. Since both your computers can handle AidDrop, that's what I would recommend - http://osxdaily.com/2011/11/14/how-to-use-airdrop-in-mac-os-x/ - as it create an instant Ad-Hoc network between the two computers and then let's it done.
A second possibility that may not be what you're looking for, is to use google drive or some similay cloud sharing app to sync the documents back and forth. both of these solutions will transfer the files well, but the airdrop may be simplest

Similar Messages

File transport does not have read/write privileges for receive location???

Hi all.
I try to read an EDI-file from a file location.
In configured the receive location but when I enable it I get an error message in the log saying:
File transport does not have read/write privileges for receive location "Location" (Event ID: 7183)
The location is correct (I used the browse option) and the folder is shared with all users (full access for everybody).
How can I get rid of this error

There can be many reasons for this error. First of all try the KB article http://support.microsoft.com/kb/888498 . Then try the solution on this link http://bluebiztalk.blogspot.com/2008/05/file-transport-does-not-have-readwrite.htmlAbdul Rafay
http://abdulrafaysbiztalk.wordpress.com/
Please mark this as answer if it helps

How to create file with APDU

Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuang

If you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand

Can't open unlocked file I have read & write privileges for

My nephew emailed me an RTF (created using iWork Pages on a Mac running 10.5.8). When I try to open it, I get "The document “x.rtf” could not be opened. You do not have appropriate access privileges."
Get Info shows the file isn't locked, plus:
You have custom access
dp (Me) Read & Write
(unknown) Read only
everyone Read only
His parents use Parental Controls, so I thought I might be encountering an ACL problem. But the Terminal command "chmod -a# 0 x.rtf" yields "No ACL present".
I tried changing the privileges for "everyone" to Read & Write but -- as I expected -- it makes no difference. (OSX won't let me change the privileges for "unknown.")
For that matter, he attached 2 other files as well -- they behave the same ways.
It's useless to try fixing the problem on his end unless I can provide his parents with super-simple step-by-step directions, so I'd prefer to fix it myself if possible, but I'm stumped as to what's wrong.

According to http://www.freebsd.org/doc/handbook/permissions.html, in the case of directories, the execute bit controls whether they may be traversed. So it's normal for this bit to be set for a directory.
To clarify where I'm at now: ls -l for the directory containing the file shows
drwxrwxrwx   9 dp dp         306 Jun 17 20:33 x.rtf
and CDing to the file itself shows
drwxrwxrwx 3 dp dp    102 Jun 15 17:17 Contents
-rw-rw-rw- 1 dp dp 10156 Apr 17 22:45 H4835.jpg
drwxrwxrwx 3 dp dp    102 Jun 15 17:17 QuickLook
-rw-rw-rw- 1 dp dp   8363 Jun 15 17:17 imgres.jpg
-rw-rw-rw- 1 dp dp 31077 Jun 15 17:17 index.xml.gz
-rw-rw-rw- 1 dp dp 47231 Apr 17 19:01 macbookair.jpg
-rw-rw-rw- 1 dp dp 36191 Apr 17 21:14 unknown.jpg
Get Info still says I have "custom access" to the RTF. Get Info for each file and directory (and their contents) it contains, however, says "You can read and write." I've searched the web and our KB but find very little about exactly what "custom access" means. As near as I can tell, it should mean it has an ACL, but as I reported earlier, that's apparently not so.

Deliver file with read/write properties on target side using receiver file

Hi All,
Our file-to-file scenario works fine. By default, PI creates file on target directory with the 644 permissions. Files coming inbound from PI are not read/writable to the group. Currently the files from PI are coming across with 644 permissions and they should be 664 or 660. Is there a way to generate read/write files on targer side using SAP PI??
Thanks in advance,
- Riya Patil

Hello,
Try using Run-Operating system command after processing parameter with the below mentioned command:
chmod 0755 /usr/sap/tmp/test/*
where: /usr/sap/tmp/test/ is the directory path location.
Br,
Rahul

How to creating file with APD (tcode rsanwb) with Key and Test characterist

Hi everybody!
I'm creating an APD with RSANBW. Data Source is a query and Data Target a File. I want display Key and Test for everyone of query characteristics. I've revised properties of characteristics into the query rows and check "key and test", however the file only contains key values.
Some help will be very appreciated,
Regards,
Sebastian.

Hi Sebastian
the data the query pulls is from the cube/DSO, which stores only the key.
the query pulls the text from the master data tables for diplay purpose only. For APD purpose the query only supplies what is avaialable in the infoprovider.
To have key and text in the target file you neeed to use transformation type routine in the APD or create an infoprovider that stores both text and key as separate fields in it and use that for the APD, with or without a query.
Good luck,
vijay

How mount ext4 partition with read/write

i use archlinux , and i have a ext4 partition, i want to mount it , add it on /etc/fstab
/dev/sda7 /mnt/sda7 ext4 defaults,noatime 0 0
i reboot, i found the ext4 partition, i have no right to R/W for user mode? why?

the ext4 partition is another linux, fedora 13, i want to mount it on archlinux.
[figo@myhost sda7]$ ls -lah
total 136K
dr-xr-xr-x 24 root root 4.0K May 9 15:28 .
drwxr-xr-x 7 root root 4.0K May 9 15:35 ..
drwx------ 4 root root 4.0K May 9 15:28 .Trash-0
-rw-r--r-- 1 root root 0 May 8 20:17 .autofsck
drwx------ 3 root root 4.0K May 1 18:28 .dbus
drwx------ 2 root root 4.0K May 1 18:28 .pulse
-rw------- 1 root root 256 May 1 18:28 .pulse-cookie
dr-xr-xr-x 2 root root 4.0K May 8 21:41 bin
dr-xr-xr-x 4 root root 4.0K May 8 21:42 boot
drwxr-xr-x 4 root root 4.0K Oct 1 2009 dev
drwxr-xr-x 117 root root 12K May 8 21:45 etc
drwxr-xr-x 4 root root 4.0K May 1 18:29 home
dr-xr-xr-x 17 root root 12K May 8 21:43 lib
drwx------ 2 root root 16K Apr 8 02:48 lost+found
drwxr-xr-x 2 root root 4.0K Oct 1 2009 media
drwxr-xr-x 2 root root 4.0K Oct 1 2009 mnt
drwxr-xr-x 2 root root 4.0K Oct 1 2009 opt
drwxr-xr-x 2 root root 4.0K Apr 8 02:48 proc
dr-xr-x--- 7 root root 4.0K May 8 20:21 root
dr-xr-xr-x 2 root root 12K May 8 21:44 sbin
drwxr-xr-x 3 root root 4.0K Apr 8 03:02 selinux
drwxr-xr-x 3 root root 4.0K Oct 1 2009 srv
drwxr-xr-x 2 root root 4.0K Apr 8 02:48 sys
drwxrwxrwt 16 root root 4.0K May 8 21:42 tmp
drwxr-xr-x 13 root root 4.0K Apr 8 02:49 usr
drwxr-xr-x 21 root root 4.0K May 8 21:41 var

How to export file with specific KB/s for video?

Just wondering how to go about doing this. I want a file to be exported with 188 KB/s video. and the audio 128kbps in h.264.

I have to admit, you found an interesting way to confuse my friend Jim.
You see, people just don't use KB/s, they use Mb/s or even Kb/s but using 188KB/s means that most of us have to multiply by eight to get a number we are used to, then divide by 1024.
So, 188 X 8 = 1504Kb/s or about 1.47Mb/s. Which is pretty small for video in this day and age, but so be it. That is their recommendation.
(If anyone wants to argue about the 1024 vs 1000, don't. I can argue both sides for you.)
http://pc.net/helpcenter/answers/kbps_or_mbps_faster
https://support.speedtest.net/entries/21057567-What-do-mbps-and-kbps-mean-
To set the export bit rate you will want to type in 1.47Mb/s but you won't be happy comparing it to a higher quality YouTube video. Darn, who would have even thought I would ever type " higher quality YouTube video" and not be kidding?

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

File Sharing (Read & Write) with a Network User - "Network User" Not Listed

My boyfriend and I both have Macs, running 10.6.3. Both Macs are connected to the internet via Apple Wireless Express. I have a MacBook Pro, and my boyfriend has an iMac with a big fancy screen, so I like to use for my own work when I'm at home and he isn't - it's just easier and more comfortable to use than a laptop.
I would like to find a way to use his computer to access a shared folder on my laptop with read & write access (so that I can modify the files on my laptop while using his computer). I have gotten to the point where I have a folder on my laptop with the files I want shared with his computer, and can access this folder from his computer. However, doing it this way (accessing my files on my laptop from his computer) only allows read-only access. I would like to be able to edit the files that are on my laptop using his computer, so I think I would need read and write access.
It seems the easiest way to do this would be to add a user (the boyfriend) on my laptop and give him read/write access to this specific folder that is located on my laptop. I found instructions on how to do this, and it says that I need to add a "network user". These instructions seem to indicate that when I add a user, there should be options for accounts on my laptop, my personal address book, a new account on my laptop, and network users. I see the first 3 options...but no option to add a network user.
Why is that? How would I make it so that from my laptop, I can add a network user...specifically my boyfriend's computer, who also uses the same internet network that I use?
Thank you so much for any help!

Also found this behavior:
While logged into the Mac Pro as MPUser1, I connect to the MacBook Pro file sharing as MBPUser1.
Then I "disconnect".
Then I log out of the Mac Pro MPUser1, and login as MPUser2.
The connection to MBP as MBPUser1 is still active!
This means that MPUser2 can access whatever MBPUser1 can access WITHOUT knowing MBPUser1's login password !
This seems WRONG! Anybody else seen this?

How to create file on application server?

how to create file on application server?

Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
    FROM VBAP
    INTO TABLE ITAB
WHERE VBELN = P_VBELN
    PERFORM WRITE_DATA.
    PERFORM READ_DATA.
*&      Form WRITE_DATA
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM.                    " WRITE_DATA
*&      Form READ_DATA
      text
--> p1        text
<-- p2        text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
        ITAB-POSNR.
ENDLOOP.
ENDFORM.                    " READ_DATA
If it is helpful rewards points
Regards
Pratap.M

Create File with access

I'd like to create a file with just a specific property: enable to read but not to write.
How can i manage?
Thank for your help.

I work under windows 2000.
Is it possible for my application to modify a file "fic.txt" of six lignes only and give the file the read only mode.My problem is: the java application create the file with read only mode and doesn't want to write on it?
If i 'm not clear sorry , here is my source code:
public void Ecrire_Fichier(String parametre,String commentaire)
try
boolean bool ;
File output = new File(this.get_Nom_Repertoire(),this.get_Nom_Fichier()) ;
output.createNewFile() ;
output.setReadOnly() ;
if (!output.isFile())
System.out.println("La cr�ation " + output.getPath() + " a �chou�.") ;
return ;
if (this.NombreLigne_Fichier()>=6)
bool = false ;
else
bool = true ;
BufferedWriter out = new BufferedWriter(new FileWriter(output.getPath(),bool)) ;
out.write(parametre) ;
out.write(" : ") ;
out.write(commentaire) ;
out.newLine() ;
out.close() ;
catch (IOException e)
System.out.println("Erreur d'ecriture du fichier" + e) ;
}

How to Create IView with the HTML Content

Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.

Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.

How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

How can I change read/write permissions for a DVD RW?

I've some files saved onto a DVD RW previously and would like to add on more files to it. However, it doesn't allow me to do that. When I checked the file info, it says that I have read & write privilege, but at the same time, there's another line that says "You can only read". When I clicked on the lock to attempt to make changes to settings, nothing is clickable. Take a look at the screenshot below and you'll know what I mean.
Can anyone advise on why this is happening?

A DVD-RW has to be wiped before re-use, so you will lose all data previously copied to it.

How to create files with read/write privileges for everyone?

Similar Messages

Maybe you are looking for