How to create flow through internet signal
for 18 months i've had an airport express in my office. i plug the ethernet cord in, the airport light turns green, and i'm good to go.
yesterday, i had to unplug the airport to move it. when i plugged it back in, i couldn't connect anymore. so i reset it and have been trying to configure it once more. but there's something i'm missing.
i swear that i set it up to act as just a bridge. it got an ip address from my office dhcp and light was green. then it allowed my macbook (and powerbook before that) to get an ip address from the same dhcp server. so it acted like a hub rather than a router that assigns its own ip to connected computers. i can't find in the set up assistant anything that looks like it will let me do that. what am i missing? it worked before.
any suggestions? thanks in advance,
adam
Yes it does. It sounds like the AX "lost" the ability to detect the DHCP server. I suggest trying a complete power recycle of all of your network components to see if this gets things working again.
o Power-off the DSL/Cable modem, Internet router, AX & computer(s); Wait at least 5 minutes.
o Power-on the DSL/Cable modem; Wait at least 5 minutes.
o Power-on the Internet router; Wait at least 5 minutes.
o Plug in the AX; Wait at least 5 minutes.
o Power-on the computer(s)
Similar Messages
-
How to create po through batch run
Hi,
how to create po through batch run (through background job)
PrashanthHi Prashanth ,
Run the below program as a background job.
Make sure that inforecord exists for all and automatic PO are ticked in Vendor and Material Master.
Program : RM06BB30
Create a suitable variant.
Job Creation : Tcode : SM36
Regards
Ramesh Ch -
How to create VPN through tunnel
how to create vpn through tunnel
Navazcan you be a little bit more specific what you wnat to achieve?
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
How to create Spool through ABAP program
How to create spool request for Smartforms through program. So I can go in TCODE SP01 and see the output of my smartforms.
Include the below code in ur program .......
DATA: PRINT_PARAMETERS TYPE PRI_PARAMS,
VALID_FLAG TYPE C LENGTH 1.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
IMMEDIATELY = 'X' "C_IMMEDIATELY
*LAYOUT = 'Z_48_144'
*LINE_COUNT = '48'
LINE_SIZE = '255'
*NEW_LIST_ID = C_NEW_LIST_ID
NO_DIALOG = 'X'
RELEASE = 'X'
IMPORTING
OUT_PARAMETERS = PRINT_PARAMETERS
VALID = VALID_FLAG
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4 .
G_PDEST = PRINT_PARAMETERS-PDEST.
NEW-PAGE PRINT ON PARAMETERS PRINT_PARAMETERS
NO DIALOG.
List of write statements to be output.......
NEW-PAGE PRINT OFF.
Reward if useful.............. -
How to create folders through PL/SQL - Urgent Please
Hi,
We are using Oracle 9i on Windows NT. Is there any way to create a folder in a specified directory through PL/SQL?
Thank you.Well,
You can and you can't. I don't know how to do that through existing PL/SQL utilities. But, you can create your own utility using java, and wrapping it so you can call it from PL/SQL.
An example of calling Operating System commands can be found in this zip file
http://www.ckamco.com/Execute_Command.zip
Please let me know if this helps at all.
Thanks
TwoPigs -
How to create ringtones through itunes on mac computer?
Okay so,
I've made ringtones before but it's been awhile and I know there used to be an option once you purchased the song that from there you could create a ringtone on your computer through itunes and pay 99c for it or whatever but I can't for the life of me find any option on how to create a ringtone. I've searched throughout itunes and looked through the FAQ and support and NOTHING talks about it except for on the iphone there is a section for ringtones but the selection seems extremely limited. Someone please help?Type "create iphone ringtone in itunes" into the google search bar.
There are several ways to make ringtones.
I prefer garageband. -
How to create PO through BAPI from custom screen
Hi SAP Technical Guru,
i am new to module pool programming.
i designed custom screen which is like TA me21n means it has one tabstrip and tablecontrol.
for header details(fields) at tab strip, and item detials(fields) at table control i used.
now i have to capture screen fields into FM bapi_po_create1 and update the database tables.
please suggest me how to create Purchase Order through BAPI FM.
regards,here is the sample code
*tables for passing podata to bapi
DATA : gt_header TYPE STANDARD TABLE OF bapimepoheader,
gt_headerx TYPE STANDARD TABLE OF bapimepoheaderx,
gt_item TYPE STANDARD TABLE OF bapimepoitem,
gt_itemx TYPE STANDARD TABLE OF bapimepoitemx,
gt_account TYPE STANDARD TABLE OF bapimepoaccount,
gt_accountx TYPE STANDARD TABLE OF bapimepoaccountx,
*tables used for passing custom field data to bapi
gt_custom TYPE STANDARD TABLE OF bapiparex,
gt_custdata_in TYPE STANDARD TABLE OF bapi_te_mepoaccounting,
gt_custdata_ix TYPE STANDARD TABLE OF bapi_te_mepoaccountingx,
*tables used for cathing messages returned by bapi
gt_return TYPE STANDARD TABLE OF bapiret2,
gt_return1 TYPE STANDARD TABLE OF bapiret2,
*Work area declaration for passing custom field data to bapi
w_custom LIKE LINE OF gt_custom,
w_custdata_in LIKE LINE OF gt_custdata_in,
w_custdata_ix LIKE LINE OF gt_custdata_ix,
*Work area declaration for passing podata to bapi
w_header LIKE LINE OF gt_header,
w_headerx LIKE LINE OF gt_headerx,
w_item LIKE LINE OF gt_item,
w_itemx LIKE LINE OF gt_itemx,
w_account LIKE LINE OF gt_account,
w_accountx LIKE LINE OF gt_accountx,
*work area declaration for cathing messages returned by bapi
w_return LIKE LINE OF gt_return,
w_return1 LIKE LINE OF gt_return1.
*populating po dat into internal tables
w_header-comp_code = 'PH02'.
w_header-doc_type = 'TEST'.
w_header-vendor = '0000600019'.
w_header-purch_org = 'PH02'.
w_header-pur_group = '901'.
w_headerx-comp_code = 'X'.
w_headerx-doc_type = 'X'.
w_headerx-vendor = 'X'.
w_headerx-purch_org = 'X'.
w_headerx-pur_group = 'X'.
w_item-po_item = '00001'.
w_item-short_text = 'test po'.
w_item-po_unit = 'CM'.
w_item-matl_group = '01'.
w_item-po_unit = 'EA'.
w_item-plant = 'PH02'.
w_item-quantity = '1.000'.
w_item-net_price = '10.00'.
w_item-item_cat = '0'.
w_item-acctasscat = 'K'.
APPEND w_item TO gt_item.
w_itemx-po_item = '00001'.
w_itemx-short_text = 'X'.
w_itemx-matl_group = 'X'.
w_itemx-po_unit = 'X'.
w_itemx-plant = 'X'.
w_itemx-stge_loc = 'X'.
w_itemx-quantity = 'X'.
w_itemx-tax_code = 'X'.
w_itemx-net_price = 'X'.
w_itemx-item_cat = 'X'.
w_itemx-acctasscat = 'X'.
APPEND w_itemx TO gt_itemx.
w_account-po_item = '00001'.
w_account-serial_no = '01'.
w_account-quantity = '1.000'.
w_account-gl_account = '0000199999'.
w_account-costcenter = '0000400011'.
APPEND w_account TO gt_account.
w_accountx-po_item = '00001'.
w_accountx-serial_no = '01'.
w_accountx-quantity = 'X'.
w_accountx-gl_account = 'X'.
w_accountx-costcenter = 'X'.
APPEND w_accountx TO gt_accountx.
w_custdata_in-po_item = '00001'.
w_custdata_in-serial_no = '01'.
w_custdata_in-zzttry = '1000'.
w_custom-structure = 'BAPI_TE_MEPOACCOUNTING'.
MOVE w_custdata_in TO w_custom-valuepart1.
APPEND w_custom TO gt_custom.
w_custdata_ix-zzttry = 'X'.
w_custdata_ix-po_item = '00001'.
w_custdata_ix-serial_no = '01'.
w_custom-structure = 'BAPI_TE_MEPOACCOUNTINGX'.
MOVE w_custdata_ix TO w_custom-valuepart1.
APPEND w_custom TO gt_custom.
*bapi to create po oreders
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = w_header
poheaderx = w_headerx
TABLES
return = gt_return
poitem = gt_item
poitemx = gt_itemx
poaccount = gt_account
poaccountx = gt_accountx
extensionin = gt_custom.
*bapi for po data commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ' '
IMPORTING
return = w_return1.
*clearing tables & work area
REFRESH:gt_account,gt_item,gt_itemx,gt_accountx.
CLEAR:w_header,w_headerx.
*displaying message returned by bapi
LOOP AT gt_return INTO w_return.
WRITE: w_return-type , w_return-id , w_return-number , w_return-message .
ENDLOOP. -
How to create unistaller through B1DE installer wizard
Dear User,
I have developed an add-on through B1DE code generator wizard and installer wizard, it successfully installs in SAP business one but when i want to uninstall it, i have to remove it manually by deleting *.sbo files and deleting it from SARI table and also from business one add-on folder. Is there any way to automatically create its uninstaller through wizard? like i created installer through installer wizard.
Any help is appreciated,
Thanks,
FarhanThanks Trinidad,
Problem is almost solved but just to confirm one thing so that i can mark this post as "Solved problem"
In the ard file generation window (found in SAP business one sdk tools > AddOnRegDataGen.exe), i want to confirm the parameter for install and uninstall. the command line argument for install is /z and for uninstall is /x ? am i right??
Your reply is ver much appreciated.
Thanks n regards,
Farhan -
How to Create GR through BAPI_GOODSMVT_CREATE - For MB0A T-Code ?
hi,
I have sap delivery number, i want to create GR based on Delivery number through BAPI only. I found one BAPI BAPI_GOODSMVT_CREATE, bt i am not able to understand which paratmeters i supposed to pass to this BAPI. Generally i create GR through MB0A.
Please find out exact soultion for me ASAP.
Thanks,
Saurin Shahhi,
I have sap delivery number, i want to create GR based on Delivery number through BAPI only. I found one BAPI BAPI_GOODSMVT_CREATE, bt i am not able to understand which paratmeters i supposed to pass to this BAPI. Generally i create GR through MB0A.
Please find out exact soultion for me ASAP.
Thanks,
Saurin Shah -
How To Create User through Pl SQL Block
Want to create user from pl sql block using dynamic SQl. Used dbms_sql package . But when I run the block it does not recognises the parameter v7 which is a constant in dbms_sql package. Message displayed is Can not access parameter from package being restricted procedure.
Is there any method to create user through PL SQl blockhi ranjit,
hope this will work
declare
uname varchar2(30):=&uname;
pword varchar2(30):=&pword;
begin
execute immediate ('grant connect, resource to '| |uname| |' identified by '| |pword);
end;
regards -
How to create WWWBinaryFileAsset through programming
Hi, Could anybody provide me steps to create WWWBinaryFileAsset through programming.
I followed below steps but i am getting error,
MutableRepository pubRepository = getPublishingRepository();
// pub repository is pointing to /atg/epub/file/SecuredPublishingFileRepository
wwwBinaryFileAsset = pubRepository.createItem(filesProperties.getWwwBinaryFileAssetItemDescriptorName());
if (wwwBinaryFileAsset != null) {
wwwBinaryFileAsset.setPropertyValue(filesProperties.getFilenamePropertyName(), imageName);
wwwBinaryFileAsset.setPropertyValue(filesProperties.getParentFolderPropertyName(), parentFolder);
wwwBinaryFileAsset.setPropertyValue("content", new File("D:\\media\\images\\hmc\\Penguins.jpg"));
pubRepository.addItem(wwwBinaryFileAsset);
Thanks,
RajHi,
I am able to create project and adding binary file asset to the project with code as i copy/pasted in this query, after creation, also i am able to see the asset in BCC editor as well.
I can say asset looks like as it was created in BCC editor, means there are nodifferences in assest properties which created through programming from asset created in BCC editor.
I am not sure what i am missing. But only the problem is, i am getting the error when deploying project from BCC, error stack trace is,
/atg/epub/DeploymentServer 14000002:Production:atg.deployment.adapter.DistributedDeploymentAdapter.pollTillDataApplied(DistributedDeploymentAdapter.java:2588) Polling Until Data Appplied
/atg/deployment/DeploymentManager Starting deployment with id: 14000002
/atg/deployment/DeploymentManager Executing deployment in LOCAL mode
/atg/deployment/DeploymentManager item = fileMarker:mark7800001 cause = java.lang.IllegalArgumentException: Negative initial size: -1
/atg/deployment/DeploymentManager at java.io.ByteArrayOutputStream.<init>(ByteArrayOutputStream.java:57)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getUncompressedInputStream(FileDeploymentCommandImpl.java:398)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getInputStream(FileDeploymentCommandImpl.java:470)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendFileDeploymentCommand(DeploymentProtocolImpl.java:913)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendCommand(DeploymentProtocolImpl.java:179)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.runCommand(FileWorkerThread.java:716)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.processMarkerForAddUpdatePhase(FileWorkerThread.java:441)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:521)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
/atg/deployment/DeploymentManager message = Deployment Failed time = Wed Jun 20 09:12:50 IST 2012 atg.deployment.DeploymentFailure@93d841 java.lang.IllegalArgumentException: Negative initial size: -1
/atg/deployment/DeploymentManager at java.io.ByteArrayOutputStream.<init>(ByteArrayOutputStream.java:57)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getUncompressedInputStream(FileDeploymentCommandImpl.java:398)
/atg/deployment/DeploymentManager at atg.deployment.file.FileDeploymentCommandImpl.getInputStream(FileDeploymentCommandImpl.java:470)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendFileDeploymentCommand(DeploymentProtocolImpl.java:913)
/atg/deployment/DeploymentManager at atg.deployment.file.DeploymentProtocolImpl.sendCommand(DeploymentProtocolImpl.java:179)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.runCommand(FileWorkerThread.java:716)
/atg/deployment/DeploymentManager at atg.deployment.file.FileWorkerThread.processMarkerForAddUpdatePhase(FileWorkerThread.java:441)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:521)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
/atg/deployment/DeploymentManager
/atg/deployment/DeploymentManager Unexpected error occurred. DeploymentWorkerThread terminated prematurely. atg.deployment.DistributedDeploymentException: Exceeded allowable error count (0)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:626)
/atg/deployment/DeploymentManager at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:300)
Thanks.
Edited by: 938890 on Jun 19, 2012 9:09 PM -
How to create graph through form9i
dear,
I mant to know how to create graph in form 9i.Right now i have no idea about graphs use in form9i.
please reply me as soon as possible.
my mail id is [email protected]
If you have any answer related to this problem please mail me in my mail id that i have given .
with regards
monika guptaHi Monika,
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
http://www.oracle.com/technology/products/reports/10gr2/Reports_guide_to_changed_functionality.pdf
http://download.oracle.com/docs/html/A90900_01/rwtutorial_graph.htm#1005697
How do I migrate my charts from Oracle Graphics to the new graph format in Oracle Reports 10g?
Since release 9i, Oracle Reports uses Business Intelligence Beans (BI Beans) to create and display graphs in reports. There is no direct migration path from Oracle Graphics to the BI Beans graphing functionality. As such, the user will need to rewrite all of their graphs using the new Graph Wizard within the Oracle Reports Builder 10g. Oracle Reports 10g supports over 50 graph types, including 3D graphs. However, keep in mind that it does not support some special types, such as Gantt charts.
It seems direct graph 6i migration is not possible from reports10g.
It is asking to use the chart wizard again with your query.
Please follow the above two link it may helps u a lot. -
How to create cases through IC Webclient
Dear all,
We are implementing Case Management to address customer complaints through Contact Center (IC Webclient)
I need your help to get a basic understanding on Case creation through IC WEB.
How can we assign an Owner and Processor to a Case.
What is the use of maintaing a processor and owner? I could not find any partner function for the processor.
What is Case Hierarchy? why do we use that.
while processing an case in a browser, where the user maintain the solution?
Can I assign an attachment file to a case at the time of creation? If yes, where can I attach?
Though it sounds simple, I could not find any proper documentation. I request you to educate me in the above process to get a good understanding. I would be grateful if you can send me some documentation or links for case management.
Your help and suggestions will be highly appreciated.
Best wishes,
Raghu ramHi raghu,
follow the customizing
1.IMG>CRM>Case mgt-->define case types
2.assign the status,text,action int no.range for the case types
3.IMG>CRM>Case mgt>basic settings>determine permitted values for case atributes-->create values for categories, reasons, priorities, authorization
4.add cases and case searchhe nav bar
based on the Account/Business Partner the cases can be searched in the ICWC.
llly cases can be created in the ICWC as well.
ACses should be linked to create a heirarchy if possible
For eg: there can more than one customers calling for a similar complaint (say a traffic signal not working) so if an agent has already creted a case for it can be searched and the new call on hand of the agent can be linked to it (this is heirarchy's importance)
Case owner is the person who creates the case like a construction work is going on at a sight and there are certain complaints received from one specific area this can be mapped via a case wherein the future complaints can be linked to it and analysed.
Case processor is the engineer onsight who works on the case (he also has previous cases which he can see to get details of the issue at hand via case hierarchy)
you can attach transactions ,BPs to a case in the linked objects link of case in the ICWC.
hope this helps
Regards
Raj -
Cross-Site Mail Flow Through Internet
Hi,
I have typical Exchange 2013 servers deployed in 2 AD sites. Currently, mail flow between the 2 sites are going through our WAN. Is there a way to force mail flow between the 2 sites to go through the internet?Hi Chester,
Create send connector pointing to the internet gateway or edge server for each AD site Exchange server separately and on the default receive connector instead of all ip address ..customize to the exchange server specific ip address that are located in the
same site...this will not allow the mail flow across the WAN and it uses the internet route for mail routing across the site..
Exchange Queries -
How to create pass-through-proxy?
How do I create some kind of pass-through proxy that can listen and receive OCI, and then forward the commands to the oracle database (sometimes where the SQL is slightly altered). What is the best way to do this?
I failed to find any relevant help in the docs. :-(
Thanks in advance!Anyone? I guess what I'm looking for is how to receive instead of just sending OCI commands, and extract the SQL from the received OCI commands/packages for possible modification/refactoring.
Maybe you are looking for
-
Dead screen, transfering documents via firewire - need help
Greetings, So I've got a 1 Ghz iMac (floating pivot screen.) - my primary mission critical workstation. My screen died today. Grrrr. No time to muck about, I went out and purchased a mac mini (1.5 Ghz single intel core), I want to transfer all data f
-
Just changed my Comcast email from POP to IMAP in hopes my iPhone 5 (iOS 7) would sync with my iMac at home and with web mail. It doesn't sync like my gmail account. Items I sent from my phone don't show up in web mail sent box. Haven't tried to swi
-
Print dialog box appears unasked when user opens Firefox and starts browsing. Occasionally comes back on but usually stays away after it's been closed a few times.
-
I'm interested in putting together a poll on what other OS versions Archers use. But before I put together the poll, I'm looking for a list of what people are using or have used both at home and at work besides Arch. Home: SuSE, RedHat, Windows. Wor
-
Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.