How to Create formulas for LIS

Hi all,
I want to create formula for LIS.
i've created formula using MC1D and assigned to update rules but it didnt stop if i put break-point in that routine. I even executed generation program (RV80HGEN).
Do i need to execute any other generation program or is there any thing else do i need to take care.
helpful replys will be rewarded.
Thanks in Advance.

Hi Sam,
Please check this PDF document on how to define formula for LIS.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS.pdf
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

For Mayank Guptha : how to create formula variable in IP

Hi,
How to create formula variable, such that it will appear in the variable screen.

Hi,
the variables you create in formula function are local to the function.
Ex., DATA CST_ELMNT TYPE 0COSTELMNT.
DATA QTY TYPE 0QUANTITY.
To get the variables listed in the variable screen you need o create variables at aggregation/filter level for the required characteristics.

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

How to create Hierarchies for a Dimension?

Hi,
How to create Hierarchies for a Dimension in Multidimensional Models? Could you please suggest some document provides step by step instructions to create Multidimensional Model?
Thanks
M Thiyagarajan

Hi M Thiyagarajan,
connect dimension to first level and after that connect that level to another one and so on. For level - each additional outgoing connection means additional hierarchy.
Philip

What are the uses of MVC, Extension and how to create it for begineers pls

what are the uses of MVC, Extension and how to create it for begineers pls
dont give link for tutorials please explain ,
thank you,
Regards,
Jagrut BahratKumar Shukla

Hi,
Check out this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/0f/ab3a3c9ca75402e10000000a114084/content.htm</a>
It is the best possible explanation and documentation that you'll get.
Thanks,
Tatvagna.

How to creat deadlock for the purchase order in SAP Workflow

How to creat deadlock for the purchase order in SAP Workflow

Hi Ben,
Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date? If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
DATA: vf_doc_date(10),
             internal_date TYPE d.
     vf_doc_date = sy-datum.              "Document date.
     internal_date = vf_doc_date.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
    EXPORTING
      date_internal            = internal_date
    IMPORTING
      date_external            = vf_doc_date
    EXCEPTIONS
      date_internal_is_invalid = 1
      OTHERS                   = 2.
Regards,
Vivek

How to create Headervariable for File adapter in 11g SOA Suite?

Hi All
My process in reading file and I wanted to know the exact name of the File.
In 10g, we have fileAdapterInboundHeader.wsdl and create HeaderVariable using message type used in this wsdl and can get file and directory name in this variable But in 11g we dont have any wsdl like this.
Can anybody give me some idea how to create Headervariable for Inbound file adapter to get file name?
Thanks
Vibzz

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

How to Create formulas for LIS

Similar Messages

Maybe you are looking for