How to create Formulas in the hierarchy structure

Hi,
Is it possible to create formula with in the hierarchy structure, so that the both hierarchy drill down and the created formulas can be displayed at the query output. Please give the valued suggestions.
Thanks
VEERU.

Hello
You have in this case to create a structure and select the node concerned in your hierarchy.
Then create a new formula based on your previous selection for example.
Rgds

Similar Messages

  • How to understand the hierarchy structure of 0PLANT io?

    how to understand the hierarchy structure of 0PLANT io ?
    i can understand the hierarchy structure of PRODUCT io,
    well, i hope someone could explain the hierarchy structure of 0PLANT io
    thanks.

    Hi
    You can use following hierarchy tables
    RSTHIERNODE - Texts of Non-Postable Hierarchy Nodes
    RSEHIERNODE - Master Data: Hierarchy Nodes that Cannot Be Posted To
    RSMHIERNODE - Master data: Hierarchy nodes that cannot be posted to
    RSHIEDIR - Hierarchy Catalog
    RSHIEDIRT - Hierarchy directory texts
    RSREQHIER - Data Request hierarchy
    RSROLEHIERARCHY - Role hierarchy
    In addition to these have a look at K table & I table for 0PLANT.
    K table - Hierarchy SID table
    I table - Hierarchy structure table
    Hope this will help..!!
    Thanks,
    Vikrant

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How to create Formula based value field in COPA

    Hi,
    I want to know how to create formula based  value field in COPA
    My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
    factor.
    anybody give some light on the same topic or requirement ?
    Thanks
    Nilesh R

    The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
    In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
    Now click the "check formuar"-button. Then save.
    Before you can use the key figure in assessment, execute TC KEUG.
    Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
    I hope this made it clearer.
    Regards
    Nikolas

  • For Mayank Guptha : how to create formula variable in IP

    Hi,
    How to create formula variable, such that it will appear in the variable screen.

    Hi,
    the variables you create in formula function are local to the function.
    Ex., DATA  CST_ELMNT TYPE 0COSTELMNT.
           DATA QTY TYPE 0QUANTITY.
    To get the variables listed in the variable screen you need o create variables at aggregation/filter level for the required characteristics.

  • How to create Variables for the Key Figures

    Hi All,
    How to create Variables for the Key Figures
    Thanks
    Bhaskar

    Hi,
    It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
    With rgds,
    Anil Kumar Sharma .P

  • How to creating TreeModel of the underlaying drives

    can anybody plz tell me how to creating TreeModel of the underlaying drives. so that we get the entire tree structure of the drives like window explorer.

    This thread will get you started.
    http://forum.java.sun.com/thread.jsp?forum=57&thread=457526

  • What is a reference location structure & How to create a new reference loc structure

    Dear PM experts,
    Need ur guidance on below :
    1. What is a reference location structure
    2. How to create a new reference loc structure
    Thanks
    Mudassar

    IH02 (reference functional location structure list) is similar to IH01 (functional location structure list)
    Create some reference functional locations via transaction IL11 and link them hierarchically.
    Then run IH02 to view the structure.
    Reference Functional Location - Technical Objects (CS-BD/PM-EQM) - SAP Library
    PeteA

  • ECM- how to assign amount to the budget structure ?

    Hi,
    I'm new to Enterprise Compensation Management (ECM Module).
    I need to know how we create a budget structure for org units? How we assign amount to the budget structure.
    I found one program 'RHECM_BUDGET_GENERATE' which generates the budget structure, but it doesn't assign the amount. So how to assign the budget amount. Which transaction we use for the same ? or Is there any FM which assigns the amount to the budget structure? I am trying to enhance the program 'RHECM_BUDGET_GENERATE'  so that it assigns the budget amount also.
    Thanks in advance,
    Shrinivas

    I'm fuming! Same problem as I like to manually assign location data, esp as I just imported lots of old photos which I recently found on an old drive. They are now on new Photos app, but iPhoto, otherwise I would use the latter to assign geo data as before. It seems very complicated but maybe I could delete from iPhoto, somehow import in to iPhotos, then import from iPhoto to Photos. Would that work?
    Lots of my photos have ALSO lost their geo data and their face data due to the fact that somehow my new "Photos" library suddenly decided to put 4000 odd duplicates in the new library imported from iPhoto. I then ran a duplicate-finding application in the new photos library, managed to remove most of the duplicates, however most of the photos that then remained had lost their face data which took ages to put on in the first place!!! (Perhaps the ones I deleted had the location nd face data I wanted and the software kept the duplicate version. I don't know...)
    Plus I am having a nightmare with the new automatic uploading photos to icloud application that runs in the background if enabled.. It says its still uploading  but doesn't appear to have got past a thousand in last few days and just 'stuck' on this amount, despite saying it is uploading automatically. My iOS devices only show a fragment of what is on my mac.
    O well!

  • How to create F4 for the standard transaction

    Hi all ,
    How to create F4 for the standard transaction for a particular field .
    Bye

    Santosh,
        You can create F4 values for a field in a standard Transaction .
    1. First search for a standard search help meeting your requirement .
    2. If you don't find one, create your own custom (z) serach help .
    ( 1 is preferable )
    After that, include that serch help to the standard field in the transaction .
    For this u need to go to the screen
    ( F1->F9-> screen-> Field )
    Click on the property of the field and include the search help .
    You ll require the access key from the basisi guys as u r changing standard .
    Hope it helps,
    ~ laxmi
    Reward for helpful answers

  • How to creat deadlock for the purchase order in SAP Workflow

    How to creat deadlock for the purchase order in SAP Workflow

    Hi Ben,
    Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date?  If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
      DATA: vf_doc_date(10),
                 internal_date TYPE d.
         vf_doc_date = sy-datum.              "Document date.
         internal_date = vf_doc_date.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
        EXPORTING
          date_internal            = internal_date
        IMPORTING
          date_external            = vf_doc_date
        EXCEPTIONS
          date_internal_is_invalid = 1
          OTHERS                   = 2.
    Regards,
    Vivek

  • How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    How do I create both endnotes and footnotes in same doc in Pages? I have iWork 2008. I understand how to create one or the other, but not both.

    You have to select one or the other.
    Try making two documents and see if you can merge the .pdfs, but their will be problems with page flow, making the pages shift. Can't see it working really.
    Pages is not the only solution out there or the best for most jobs (let alone the safest). Try Word for Mac, LibreOffice (free) or any App that has the features you need.
    Peter

  • Error in the hierarchy structure - Data Load Failure

    Hi
    We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
    Error in the hierarchy structure     
    Node ID 00016749 does not exist.
    Node ID 00005867 starts an endless loop
    Node ID 00001367 has not been included in the hierarchy
    Can any one help me out to solve this issue?
    Best Regards,
    Venkata.

    hi,
    refer to this thread.
    No hierarchy displaying in the Maintain Hierarchies

  • How to create Reports for the infopath form data

    Hi All,
    I have a requirement to generate reports in SharePoint based on InfoPath form data which is submitted into form library. Do I need to store each InfoPath form data into SQL Database/MS Access Database. if yes, can any one  help me on this how
    to save InfoPath form data into DB while submitting into "Form Library". based on the data stored in DB how to create  and view the report in SharePoint?.
    Thanks in Advance,
    Satish
    Thanks & Regards Satish Dugasani

    Thank you for asking the questions for clarification, my requirement is like below
    1. Need to insert all infopath form fields data into Access Database when i am submitting to the Form library
    2. Create Access Reports like based on time period, based on submitter name, based on state, city, and combination of these etc.
    3. Sync Access Database every time i am updating the form
    4. View Access Reports in share point site
    PS: I worked on this like below approch
    1. Written Web Service to Sync Access Database for the Infopath form
    2. Create Access Reports
    3. Publish using "Publish to Access Services" by providing site URL it will create a subsite there i can able to see reports, tables, macros etc. but that is not an user friendly like i am not able to apply my branding because it is pointing to /_Layouts/accsrv/Modifyapplication.aspx.
    could any one suggest me on this.
    Thanks & Regards Satish Dugasani

  • How to create links to the same page, how to create links to the same page

    How to create link to the same page with iweb?
    Thanks

    You're referring to anchors.  There are a couple of ways. These topics discuss them:
    iWeb FAQ - Anchors
    How do i hyperlink to certain portion...: Apple Support Communities
    OT

Maybe you are looking for