How to create framesets?

Not animation/rollover frames, but actual frame sets...
As per my previous topic in this forum, I made a graphic to
show my situation:
http://img270.imageshack.us/img270/8130/samplesite46732248at.jpg
The canvas is 800x600. Everything GREEN cannot be moved
(meaning I do not want to change the layout). I would like a
frameset (might be another way to do it, but it must function like
a frameset) within this area with a scroll bar in it (BLUE)
I tryed adding a "layer" on top of it in dreamweaver, but the
layer did not allow me to keep the size a certain amount. I pasted
some sample text and the result was something like this:
http://img270.imageshack.us/img270/7898/samplesite445787547pn.jpg
Any possible solutions (keeping in mind I am a total newbie
at web design)?
Thanks again

Perhaps I am understanding something wrong, or perhaps I am
explaining my situation wrong.
Everything you have said so far works the way you explained
it, but here is why it does not work in my situation:
If I set the right value to 20% (for example), than the layer
will be 20% from the right side - which is fine in theory, but as
soon as I grab the right edge of my browser window and resize it
(to simulate different viewing conditions/screen res's) the layer
moves as well (because it is remaining 20% away from the edge). The
result is that the layer moves "on top" of other elements of my
page. The same for the top value - if I set it a certain %, and
move window size smaller/bigger vertically, that layer moves into
my header and even off my canvas if the window is resized enough.
The same thing happens when I set it to use px instead of %.
The pixel value (from the left edge for example) will be 300 px
(example). If I resize my window by dragging the left side into the
center, than the layer still stays the standard 300 px from the
left side - which means my layer starts to move off of the right
side of my canvas.
I hope that gives a clearer image of my situation.
Oh, and thanks again for all the help
EDIT Here is a little animation I made that shows the
problem by simulating different browsing sizes. Color Red is my
menus/headers etc. Blue Gradient is my background (behind my
canvas). The little text block in center is my Layer. Black is
outside of the window area.
http://img270.imageshack.us/img270/3725/sampleanimation5781ei.gif
This is with my right value set to an X number of pixels. But
the situation would be similar if I set it to have a left px value,
or a left/right % value (only it would move the other way).

Similar Messages

  • How to create a query view in sap bw?

    can any one please tell me how to create a query view in sap bw 3.5?

    Hi,
    you can do this by using Bex analyzer and WAD ..
    gop through this link ..
    http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
    hope this helps you ..
    Reagrds,
    shikha

  • How to create a macro for a planning type in MC8b transaction

    Hi,
    I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
    the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
    i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
    but i need to create a macro for this planning type .
    can any body give the details information how to create a Macro for a planning type.
    Thanks and regards
    GopalKrishna

    Dear Gopal
    May be the link would be helpful to you.
    [Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
    Drill down the left tab once you opened the link, for more information.
    Thanks
    G. Lakshmipathi

  • How to create the web template

    Hi BW Experts,
       how to create the web template.....!
       I just want to know what is the use of Web template. i want to display the report
    in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
    Thanks
    shahina..!

    Hiu2026
    Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
    Go to All programs and select your web application designer
    Select the button to create a new page in WAD
    Select the chart and place in the layout
    Next goto Data provider Target and select your query
    Give your report name in the given data provider screen
    Select your query in History/find/Favourites/Infoareas button
    Select your query in this screen and click OPEN
    Now we can see the data provider is assigned to the chart.
    To edit the chart you have to right click on the chart
    After right click on it we will find another screen where we can edit all the settings
    In this screen we can find NEXT click button to change our settings
    In this screen we can state the tasks (Title, units, values, range)
    In this screen we can change our background /validity/color
    In this screen we can add values to the chart
    In this screen we can add validity/positions/order/axis types to the chart
    In this screen we can change the global settings/and overview of the chart.
    This screen shows that we have customized the chart successfully
    After successful creation of the chart we have to save the chart
    Save your chart in your favorites by giving the description and technical name in the given block.
    Now execute your WAD by selecting the execute button
    The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
    Web Application Designer for Beginners
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    Web Application Solutions: A Designer's Guide
    http://www.lukew.com/resources/webapplicationsolutions.pdf
    http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
    Feautures of WAD in 7.0
    http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

  • How to create the Web application designer

    Hello BW Guru's,
    how to create the WAD... step by step procedure and where to save the report and how to excute the report.
    please send as soon as possible.
    Thanks
    Sudha

    hi,
    you can also refer to the following links.
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
    hope it helps,
    regards,
    Parth.

  • How to create a custom layout set to display the KM folders...

    Could someone please tell me how to create a custom layout set to display the KM folders?
    Thanks,
    Sudha.

    Hi Sudha,
    Please check the following blogs whick will guide you step by step.
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
    If helps reward points
    cheers
    dev

  • How to create shipment document with out inbound delivery document

    Dear Friends
    How to create shipment document with out outbound/inbound delivery document.
    In my client scenario, there is no inbound delivery for normal purchases.
    Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
    Can we do shipment creation with reference to PO?
    If it is possible, how it will be?
    Please let it solve
    With regards
    Lakshmikanth

    Dear Sameer,
    Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
    Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
    After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
    For more information please go through this SAP help link
    Note:- Shipment process need to be carry out for the deliveries before PGI.
    http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    I hope this will help you,
    Regards,
    Murali.

  • How to create one TO for multiple TRs

    Dear All,
    how to create one TO for multiple TRs, kindly suggest me
    Regards,
    balu

    As for your question: it is discussed in sAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Sorry I misunderstood your question.
    The above mentioned solution won't create one single TO from multiple TR.
    Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

  • How to create tab pages in EP

    Hi Experts,
    Can you please let me know how to create tab pages in EP. I have created one page. In this page, I have to place 2 iViews as tab pages. Can you please let me know how I can acheive this?
    Regards,

    Stuart,
    Within a SAP Portal Tabs are not used like you want them to
    By default Tabs are used inside an iView and not to "tab" between iViews on a page...
    The most straightforward solution would be creating a custom PageLayout that you can assign to your page.
    I would sugest to implement this custom PageLayout with DIV layers and trigger "tabbing" via JavaScript eventing.
    For more infor on how to create a custom PageLayout take a look at here:
    [http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/efbac120711a71e10000000a422035/frameset.htm]
    Good Luck,
    Benjamin Houttuin

  • How to create ITS for a R/3 Transaction?

    Hi All,
    I am new to ITS. Can somebody please let me know how to create a ITS for a R/3 transaction. I tried from SE80 but not able to get the result. I even checked in SICF. Whatever the service that I am created, it is not visible in SICF.
    Please help and correct me.
    Helpful answers will be rewarded.
    Thanks in advance,
    RSS.

    Hi,
    Hope this helps.
    http://help.sap.com/saphelp_nw04s/helpdata/en/70/579509a7c611d3961700a0c94260a5/frameset.htm
    Thanks,
    Vishnu
    Edited by: Vishnu vardhan reddy Sangati on Aug 7, 2008 4:22 PM

  • How to create a .par file from console apart from tools like eclipse,studio

    Plz reply me if any body knows how to create .par file from Console i.e command prompt.just like creation of .jar & .war file in java.I have created some iViews and making .par files from tool Eclipse/Netweave rstudio etc..I waqnt to create from console..How it is possible?
    Regards
    Sridhar Raju

    Hi Sridhar,
    I'm unsure for what you'd need this, but in general there are at least two possibilities:
    - manually pack everything into the dir structure needed (documented here: http://help.sap.com/saphelp_nw04/helpdata/en/f9/561140d72dc442e10000000a1550b0/frameset.htm ), than create a ZIP with some command line tool (e.g. JAR), naming it to .par.
    - use ANT to do this; with this, you can even deploy the file, see PAR-File deployment with ANT (EP6)
    Hope it helps
    Detlev

  • How to create request for extracting company code

    Hi All,
    Can any body guide me how to create a request for extraction of company code 0COMP_CODE_ATTR.
    Actually i have created a request using transport conneciton but while moving this request to quality system i am getting following error.
    DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
    Mapping between data source 0COMP_CODE_TEXT and source system QLTCLNT440 is inconsistent
    DataSource 0COMP_CODE_TEXT does not exist in source system QLTCLNT440 of version A
    Field KEY1 will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
    Field TXTMD will not be delivered from DataSource 0COMP_CODE_TEXT in source system QLTCLNT440
    Start of the after-import method for object type R3TR ISTS (Activation Mode)
    Reference to transfer structure 0COMP_CODE_TEXT_BB not available. No activation possible.
    Start of the after-import method for object type R3TR ISTS (Delete Mode)
    Start of the after-import method for object type R3TR ISMP (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    Actually i have checked in Quality system 0COMP_CODE_TEXT is availble active. But i think we have to use 0COMP_CODE_ATTR data source...
    Pls help,,,
    Regards,
    viren.

    Hi Viren,
    Glad that your problem is resolved.
    Help.Sap.com is the best reference: http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
    Also check the "How-To" docs in https://www.sdn.sap.com/irj/sdn/developerareas/bi
    Bye
    Dinesh

  • How to create complaints with reference to ECC Billing document (CRM 7.0)

    Hi experts!
    I use ECC 6.0 and CRM 7.0.
    I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
    I read the following topics and help:
    1. How to create complaints with referenceto ECC Billing document
    2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
    3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
    Made these settings:
    1. Define the Business object type
    Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
    2. Assign Business Object Types to Transaction Types
    Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
    3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
    Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
    but still do not know,
    1) if I should pre-replicate billing documents into CRM ?
    2) Or, the system uses the RFC to find these documents in ECC to create reference?
    Please help me.
    Best regards Kostya.
    Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

    not resolved =(
    Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

  • How to Create New users in 9.3.1

    Hi All,
    Could you please tell me how to create the new users and their groups for sepecific cube in 9.3.1 version and how to grant the permission roles.
    Will Shared Services does the above actions. if yes could you please let me know the steps to create the new users.
    Thanks in Advance,
    Raj.

    Hi,
    Here is how to create users in Shared Services :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/crtuser.htm
    The rest of the information for Shared Services is in :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_cas_help/frameset.htm?apc.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to create the PDF file in WebDynpro?

    Hi.
           How to create PDF file in Webdynpro?
    I have one WD screen In there i have one File Download action. Once i click that it will open one PDF file which consisting of all details.
    Pls reply me.
    with regards,
    Gobintah.R

    Hi
    Check these links
    Re: Opening a PDF File from WebDynpro
    Re: Generating PDF file using FOP API in Web Dynpro
    http://help.sap.com/saphelp_nw04/helpdata/en/1a/ff773f12f14a18e10000000a114084/frameset.htm
    Thanks
    Edited by: Anup Bharti on Oct 16, 2008 11:51 AM

Maybe you are looking for

  • My ipod wont let me download free apps.

    Every time i try to download a free app, a sign pops up saying "SIGN IN REQUIRED: Tap continue and sign in to view billing information." and when i press continue, it wants me to put in my credit card info.

  • Media encoder error compiling movie disk full

    I am trying to encode a movie, and the encode is estimated to take 2 hours.  I am using my new mac pro, osx 10.9.3. This comes up after I get the message "DIsk not ejected properly" from the system. The disks still appear in the finder, and the files

  • How Do You Determine Your Apple FS Balance?

    How can I find the balance of my Apple Financial Services account? It's underwritten by TD Financial Services, which has even less information. There's no place to log-in on Apple's or TD's sites, no information on either site and no information in t

  • Wat is perform on commit

    Plz give reply to me

  • AR reports - Trading Community Architecture (TCA)

    We have just recently started using the TCA model for handling customer/party relationships. In our present setup there is a one to one relationship between party number and customer number, but customer number is not equal to party number. Most of t