How to create ''from to '' parameter in XL reporter for templates
Hi,
How to create ''from to '' parameter in XL reporter for templates
Can anyone help me in this regard
thanks,
Suresh Kannan
Suresh,
1. Goto Report Designer
2. there u can find "Advanced Report Builder" on left side of the window
3. At the below u can find three buttons like "Parameters", "Properties","Apply"
4. Click on "Parameters"
5. then Parameters window will populate
6. Click the new Button
7. Name: give as u like
Category: Literal
Type: Date
Attribute: Leave blank
Default Vale: Leave Blank
Prompt: From Date
This is the process to create the parameters.
Similar Messages
-
How to create an optional parameter in ssrs report
I have a report where I want to give the report user the option of entering a phone number as a filter if they want to pull data only for a particular phone number or pull the report without entering a phone number as a parameter, thus disregarding
the use of the filter. I have parameter for the phone number that shows as a text box where the report user can enter the number then click to run the report. A filter on the data set that uses the phone number parameter as the
value. It works fine when I enter a phone number (it returns the row associated with the phone number entered. However when I do not enter a phone number, no rows are returned. How can I get all rows to be retuned when
I do not enter a value for the parameter?
M CollierHello,
Did you specify the DefaultValue or ValidValue of the parameter 'parameter name1' by get values from another parameter or itself?
If there is another parameter or
cascading parameters , the error may caused by the order of parameters. When preview report, the order of the parameters in the Report Data pane determines the order in which the parameter queries appear in the report. Please verify the order
of the cascading parameters.
Whats's more, please also check the parameters name and the acceptable values of the parameters.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
How to use the region parameter of main report for subreport chart titles?
I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do? -
How to Create a Linked Subreport in Crystal Report for Enterprise
Hi All
I am developing a monthly report grouped by cost centre, I want to create a second table for each cost centre showing year to date, underneath the monthly data for that cost centre. My thoughts on how to achieve this is to create a linked subreport in the group footer of the cost centre grouping. However every time I try to set this up the report crashes. Am I doing something wrong, can this be done in crystal reports for enterprise? Can anyone give me a pointer on how to set up a linked subreport so that it passes the particular cost centre the report is grouped upon into the subreport so it only shows data relevant to that cost centre?
Any help will be appreciated as I am going in circles at the moment.
Thanks
Neil
Edited by: SmiddyLad on Feb 6, 2012 2:49 AMHi Neil,
You are doing right. You can create linked subreport in crystal report for enterprise. Please refer below link to see the elearning tutorial in which a simiar scenario is explained step by step. Here its an unlinked subreport. Enable subreport filter to make it linked and try. It should work.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/200c56fc-5a02-2e10-36a1-ba3d28e31fc2]
Hope it helps you.
Regards,
Nikhil Joy -
How to create a dynamic parameter off a universe field
Post Author: Summer Frend
CA Forum: General
Hello,
I am trying to create a dynamic parameter in Crystal Reports off my universe field. However the fields appear to all come in as STRING with length 65534 (memo field?). Therefore the fields are not available to choose in my parameter creation box. NOTE: In the universe designer, the field is set as CHARACTER type. I am just trying to make it work with the sample universes that are shipped with BobJ.
Is there a way in the Universe Designer to make the fields come into Crystal Reports as string fields so that I can choose them as the value for the dynamic parameter in Crystal Reports?
Thanks,
Summer FrendI'll try again,
My problem is that I want a dynamic paramater for my Master flow (on START1 activity, so it is something like that : start1.param = select seq.nextval form dual; or from a function GET_PROCESS_ID) but it seems that I must give a permanent parameter it can not be set dynamicaly. I want my flow to be independant of any human intervention. So if it is the first load it does one thing if not the first load it does something else. I can not understand the point of having a parameter (in) that can not be set dynamicaly (looks more like a constant to me, or I'm missing something here). Hope your getting my point.
Thanks again
Jacques -
How to create a system parameter in Apex
Hi friends,
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
Regards,
Pradeepbluerose wrote:
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
What is "a System Parameter in Apex"? What "privileges" are used to create one?
You'll find it easier to get help if you use terminology that is familiar to everyone... -
How to create a single SCN [Inbound Deliery] ' VL31n ' for multiple PO's
How to create a single SCN [Inbound Deliery] ' VL31n ' for multiple Purchase-Orders with the help of BAPI or BDC Recording in 4.6 b version.
Manually its possible.. but how is it possible in the background i.e through BDC Recording or BAPI's.
[ As we donot have an option of creating one same SCN [Inbound Deliery] for multiple Purchase-Orders in 'VL31n' ].
Please provide the needful Information.These mpeg2 clips do not have audio.
I simply want to create a script that can read in the files, append to each other and then export to an .mov format.
I want the process to be called from a command line that will open QT, run the script, read in the files, append and export.
Thanks.
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows -
How to pass in a parameter into a report viewer on a jsp - and hidden
Hi, I've built a php application and am using the java environment to enable the crystal report/viewer. The developer was looking how to pass in a parameter into a report viewer on a jsp. Ultimately the end product we need is to get an HTML report viewer loading a report file with hidden parameters so to not expose other customer data (it's a shared database for multiple customers) preferably loaded from php using maybe the php java bridge. Would anyone happen to have any sample code or any guidance?
<%@ page contentType="text/html; charset=UTF-8"
pageEncoding="ISO-8859-1"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<%
// just a test to grab rpt name from GET
String rptFile = "report_files/" + request.getParameter("rpt");
%>
<crviewer:viewer reportSourceType="reportingComponent" viewerName=""
isOwnPage="true">
<crviewer:report reportName="<%= rptFile %>" />
</crviewer:viewer>
Many thanks in advance!
MarkI am not aware of any html tags you can pass to the viewer for parameter values. Normally, you would load the report in code and then use the SDK with the report object to pass parameter values.
-
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
How to create DB partitioning in active data tables for ods?
hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
harithaHaritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale -
How to create some columns dynamically in the report designer depending upon the input selection
Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
ThanksHi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu -
How to create Infoset&user group query--(query report)
Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .Ggoto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu -
How to create Profit and loss account using report painter
Dear All,
Can some one guide me as to how to create Profit and loss account using report painter.
If some one can share the document having steps to be done,would be of great help.
Thanks in advance.
Regards,
GokulHi,
Could you please re-phrase your question? As the report painter is a reporting tool I assume you want to report on P&L accounts and not u201Ccreateu201D them. A few more details on what you intend to report would be useful.
Regards
Karl
Maybe you are looking for
-
How to Print Crystal Report without any dialog message on the client side
Hi! I've read too much questions like this, but i can't find any answer. How can i print a report on the client side directly? I have three buttons, "Generate Report", "Generate PDF", "Print". I want when the "Print" button was clicked, automaticaly
-
My computer crashed and my iTunes library is only on my iPod Touch. How do I restore my library to my new computer?
-
Pictures not printing in pdf file
Hello, Was wondering if anyone had a solution for this problem. I have a pdf file and am using Adobe Reader 8.1.2 and for some reason it will print out a application packet I downloaded from the city with out any of the pictures. The same packet can
-
I have created rfc function, and it works fine in SAP, but when I try to call this function from Excel I get '0.00000', data type is correct. VBA code: Set F2 = functionCtrl.Add("ZFUNC") F2.exports("PARAM1") = "123" F2.exports("PARAM2") =
-
Does the Subtitle support released by nokia does n...
I updated my Nokia C7 to the latest Software ver. 013.016. And yet i'm unable to use subtitles in the videos. Is the subtitle support is supported for the limited codecs ? Or it's just me doing something wrong ?