How to create groups with non-local addresses

I want to create a mailing group that consists of non-local addresses like [email protected], [email protected]
How to do this ? I know that editing /etc/aliases redirects to local accounts only. The above is possible by editing /etc/postfix/virtual and do a postmap on this file. Is there any alternate way ?

I use an include file for my groups - easier to modify...
In /etc/postfix/aliases...
some_groupname: :include:/path_to/groupname.txt
In the 'groupname.txt' file (textedit, plaintext file), a list of the members...
localemailuser
[email protected]
After any edit of the group file... sudo newaliases
-david

Similar Messages

Load Balacing on VPN3000 with non-local address pools

Is it possible to load balance when the VPN3000 does not have an interface in the address pools, i.e. using "non-local" address pools as the documentation puts it? I know this works without clustering by setting static routes to the pool on the nearest router. But in a clustering setup it seems to me there is no way to assign a static route since there is no way to pre-determine which cluster member the client will connect to (an additional virtual address on the private network would solve this but I suppose it's too late to hope for new features!)

20 flows and a bit better result:
IOS-XR               Monitor Time: 00:00:08          SysUptime: 133:33:44
                     Last Clear:   00:00:06
Protocol:General
Interface             In(pps)      Out(pps)      InPkts/Delta   OutPkts/Delta
Te0/1/0/0             11794         14977             0/44696         0/44484
Te0/1/0/1             10682          8786             0/37924         0/25456
Te0/1/0/2             18243         16958             0/44596         0/57579
Quit='q',     Clear='c',    Freeze='f', Thaw='t',
Next set='n', Prev set='p', Bytes='y', Packets='k'
(General='g', IPv4 Uni='4u', IPv4 Multi='4m', IPv6 Uni='6u', IPv6 Multi='6m')
Can the ASR9K more or less normal balance on uneven number of links?

HT202724 When I send a message in a group with non-iPhone users it appears as a mms, how do I change the settings so it's a sms?

When I send a message in a group with non-iPhone users it appears as "New Multimedia Message." One of my friends in the group also has an iPhone and his doesn't appear this way, how do I change my settings so it appears as a normal text message and not an mms?

iOS: Troubleshooting Messages - Apple Support
Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create database with ASM

HI
How to create database with ASM?
I install vmware workstation on window XP .On virtual machine install Linux 5 enterprise (Oracle) install.
I install oracle DB software only. Also make 3 disk for ASM .
1 -- When I want to install oracle DB with ASM . In this process candidate disks not show . Why?
How I can see disks ..
so I simple install oracle DB software only.
2 -- Now I want to create database with ASM by DBCA .
What process I will follow ?
Please guide me
Thanks

Hi
Steps to create database with ASM.
1.Install oracle binary with active CRS(For single node installation CRS is activated when you run root.sh) .
2.Create disk without file ssytem.
3.Assign disk to raw .
4.Change owner and permission to raw devices.
5.Configure ASM manually or USing DBCA.
Manually ASM Configuration.
a.Create initialization parameter file and password file.
b.Mandatory parameter is "instance_type=asm" as per your need configure rest of parameter like db_cache_size,large_pool_size,processes,remote_login_passwordfile,shared_pool_size etc..
c.To discover disk configure "asm_diskstring=/dev/raw/raw*"
Using DBCA to configure ASM.
1.In storage type section choose ASM.It will ask for password of sysdba in 10g.
2.ASM configuration window will open -> here it create disk group -> it shows all available ASM candidate disk automatical -> choose normal redundancy,external redundancy or high redundancy.
ASM disk also can be conbfigured with ASMLIB .
If ASM disk is configured you can start asm instance in nomount state and query to v$asm_disk to see all candidate disk.V$asm_disk only shows disk which is configured in asm_diskstrings.
Hope this will help U,
Tinku

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary too

How to create a secure & non editable PDF? So that it cannot be modified by any of the secondary tools available online for security breaks and editing of PDF document
I put all the security options but still there are tools to break the security (even password) leading to editing of document
Need to avoid any such situation

If the document is important, and there is something to be gained by modifying it - then someone will just make a new copy of it (e.g. print and scan, screen capture), and make a new document, then change it.
If protecting the integrity of the document - proving it is unchanged - is the thing, look at digital signatures. Forget security, the signed file can be freely edited, but the signature will always show it is changed.

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

How to create folder with sub folder ?

How to create folder with sub folder ?

Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David

How to create file with APDU

Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuang

If you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand

How to create Vector with reference to Collection

hello experts,
can someone let me know how to create vector with reference to Collection interface.
Collection is an interface. and we cant create an instance of it. i'm not clear of what to pass in that constructor.
Vector v = new Vector (Collection c);
what are the possible objects of 'c'
post some example code please.
thanks

Ever heard of reading the javadocs?
"Collection is an interface. and we cant create an instance of it." - you don't understand interfaces, then.
// I certainly can create a Collection - here's one
Collection c = new ArrayList();
// Now I'll add some Strings to my Collection.
c.add("foo");
c.add("bar");
c.add("baz");
// Now I'll make a Vector out of it.
Vector v = new Vector(c);%

How to create parameter with multiple selection in a query (SQ02) ?

Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.

Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter?

How to create CATALOG with MS SQL Server?

Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!

You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification.

How to Create IView with the HTML Content

Hi Friends,
Give me steps how to create IView with the static html file.
Regards,
Lakshmi Prasad.

Hello thr...
follow the below link for the required steps.
[KM Document iView|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/cf14bcd42911d5994400508b6b8b11/frameset.htm]
You need to upload the document onto KM. Then you will be able to create the KM Document iView.
Cheers!!!
Biroj Patro.

How to create groups with non-local addresses

Similar Messages

Maybe you are looking for