How to create help system in flex?

I want to cerate help system in flex. Previously i have
created online help systems using RoboHelp.
Please help.

Wouldn't Adobe want to integrate its industry leading
Flash-based help system with its state-of-the-art RIA development
system.
This must be doable using RoboHelp's WebHelp/FlashHelp
source.
I would sure appreciate any "help" on the subject.
It's hard to believe that a Flex help system is a "roll your
own" development effort.

Similar Messages

How to create file system datagrid in flex web application

how to create file system datagrid in flex web application

Hi,
Check this out:
http://shigeru-nakagaki.com/flex_samples/FileReference/FileUploadExample2/FileUploadExampl e2.html
Johnny
Please rate answer.

PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
Michael

Hi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

Hi how to create logical systems.

Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.

Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub

How to create Source System in BI 7.0

Hi Experts,
How to create Source System in BI 7.0, please urgent
Thanks

Hi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
®

How to create a system parameter in Apex

Hi friends,
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
Regards,
Pradeep

bluerose wrote:
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
What is "a System Parameter in Apex"? What "privileges" are used to create one?
You'll find it easier to get help if you use terminology that is familiar to everyone...

How to create logical system

Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
Kelly

Hi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano

How to create SAP System

Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan R

Hii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull.

How to create help view

hai,
how to create help view

Views
Importance/Use of Views
Data for an application object is often distributed on several database tables. Database systems therefore provide you with a way of defining application-specific views on the data contained in several tables. These are called views.
Data from several tables can be combined in a meaningful way using a view (join). You can also hide information that is of no interest to you (projection) or only display those data records that satisfy certain conditions (selection).
A view is a logical view on one or more tables, that is, a view is not actually physically stored, instead being derived from one or more other tables.
The data of a view can be displayed exactly like the data of a table in the extended table maintenance.
Join, Projection and Selection
CROSS PRODUCT
Given two tables TABA and TABB. Table TABA has 2 entries and table TABB has 4 entries
Each record of TABA is first combined with each record of TABB. If a join condition is not defined, the cross product of tables TABA and TABB is displayed with the view.
Join condition
A join condition describes how the records of the two tables are connected.
Inner Join and Outer Join
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view.
With an outer join, records are also selected for which there is no entry in some of the tables used in the view. (ABAP allows left outer join.)
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join.
Projection
Sometimes some of the fields of the tables involved in a view are not of interest. The set of fields used in the view can be defined explicitly (projection). In our example, Field 4 is of no interest and can be hidden.
We specify the fields which we need to show in our view by including them under the view flds tab when creating a view in the dictionary.
+Selection Conditions+
Selection conditions that are used as a filter can be defined for a view.
Specifying these conditions under the Selection conditions tab when creating a view in the dictionary would have an effect which is similar to specifying a where clause when writing a select query to restrict data.
View Types
Four different view types are supported. These differ in the way in which the view is implemented and in the methods permitted for accessing the view data .
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Help views can be used as selection method in Search help.
Maintenance views permit you to maintain the data distributed on several tables for one application object at one time.
Database Views
Database views should be created if want to select logically connected data from different tables simultaneously.
Database views implement an inner join.
Application programs can access the data of a database view using the database interface. (Just as we write select queries on database tables, we can write them for views as well.)
Includes in Database Views
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields).
To include one of the tables in the view, enter character * in field View field, the name of the table to be included in field Table and character * again in field Field name on the View fields tab page of the maintenance screen of the view.
You can also exclude individual fields of an included table. If you do not want to include a field of the included table in the view, enter - in field View field, the name of the included table in field Table and the name of the field to be excluded in field Field name.
Inserts with Database Views
If a database view contains only one single table, data can be inserted in this table with the view .
You have the following options for the contents of the table fields not contained in the view:
If the field is defined on the database with NOT NULL as initial value, the field is filled with the corresponding initial value.
If the field is defined on the database as NOT NULL without initial value, an insert is not possible. This results in a database error.
If the field is not defined on the database as NOT NULL, there will be a NULL value in this field.
Projection Views
Projection views are used to hide fields of a table. This can minimize interfaces; for example when you access the database, you only read and write the field contents actually needed
For the above diagram, fields F3 and F4 are irrelevant, and therefore hidden from the projection view of the table.
Maintenance Views
A maintenance view permits you to maintain the data of an application object together.
The maintenance status determines which accesses to the data of the underlying tables are possible with the maintenance view.
Maintenance Status
The maintenance status of a view controls whether data records can also be changed or inserted in the tables contained in the view.
The maintenance status can be defined as follows:
Read only: Data can only be read through the view.
Read, change, delete, insert: Data of the tables contained in the view can be
changed, deleted, and inserted through the view.
Read and change: Existing view entries can be changed. However, records
cannot be deleted or inserted.
Read and change (time-dependent views): Only entries whose non-time
dependent part of the key is the same as that of existing entries may be
inserted.
Help Views
Help view is created if a view with outer join is needed as selection method of a search help.
Help views are used exclusively for search helps.
A conventional database view selects data from the database using an inner join.
For a help view however, data is selected using a left outer join.
Eg-> Suppose table SCARR (Airline master table) has AA American airlines
AB Air Berlin
AC- Air Canada as three entries.
Table SPFLI (Flight schedule) has entries corresponding only to airlines AA (American airlines) and AB (Air Berlin).
Now if a database view were to be used as a selection method for a search help for airlines, we would only get AA and AB as possible entries because the database view implements an inner join.If however, we were to use a help view as the selection method here, we would get AA,AB and AC as possible entries because a help view would implement a left outer join.
Restrictions for Maintenance and Help Views
There are some restrictions for selecting the secondary tables of a maintenance view or help view. The secondary tables have to be in an N:1 dependency to the primary table or directly preceding secondary table. This ensures that there is at most one dependent record in each of the secondary tables for a data record in the primary table.
Append Views
Append views are used for enhancements of database views of the SAP standard.
With an append view, fields of the base tables of the view can be included in the view without modifications. This is analogous to enhancing a table with an append structure.
An append view is assigned to exactly one database view. More than one append view can be created for a database view.
The append technique described can only be used for database views. With an append view, only new fields from the base tables contained in the view can be inserted in the view. You cannot insert new tables in the view or modify the join conditions or selection conditions of the view.
Check out the below related threads
Views
views

How to create 3d photgallery in flex using xml

How to create 3d photgallery in flex using xml . I am new to flex please help me.Thanks in advance

How to create 3d photgallery in flex using xml . I am new to flex please help me.Thanks in advance

How to create multiple pages using flex application.

Hi all,
i am doing flex application which contains 5 different
pages,
to do this i have used viewstack component to navigate
between the pages.
this is working fine if all my pages are of same size. each
page as different background image.
but i have to create pages with different sizes.
my first and second page are small and remaining pages are
big.
when i navigate to 3rd or 4th page, it is showing scrollbar
inside swf.
but i want scrollbar for browser window not inside my swf
anyone please guide me how to create pages in flex
application.
i have one more doubt, if my page contains some html links ,
how to open those links,
is it posible to open the link in new window.
please help me , i have no idea how to create web
applications using flex
Thanks in advance
regards
avanthika

Hi inlineblue,
Thanks for your reply,
you asked about sample code,
following is my sample code.
In my Application mxml file, i am loading all custom
components for each page.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*"
horizontalAlign="center" verticalAlign="top"
styleName="plain"
backgroundColor="#FFFFFF"
creationComplete="init()" width="780" height="594" >
<mx:Script>
<![CDATA[
//navigating to next page
public function showNextStep(newIndx:int):void{
vs.selectedIndex=newIndx;
//navigating to previous page
public function showPreviousStep(newIndx):void{
vs.selectedIndex=newIndx
]]>
</mx:Script>
<mx:ViewStack id="vs" paddingLeft="0" height="100%"
width="100%" >
<mx:Canvas id="s1" label="step1"
backgroundImage="assets/Step1.jpg" >

<mx:HBox paddingLeft="8" width="780" height="548">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="697" y="18"
click="showNextStep(1)" width="72" height="24" />
<mx:Button alpha="0" buttonMode="true" x="697" y="508"
width="72" click="showNextStep(1)" height="24"/>
</mx:Canvas>
<step2 id="s2" label="Step2" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step3 id="s3" label="Step3" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step4 id="s4" label="Step4" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
<step5 id="s5" label="Step5" hideEffect="{blurImage}"
showEffect="{unblurImage}" />
</mx:ViewStack>
</mx:Application>
// following is the page2 (step2) component code
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step2.jpg" width="778" height="600"
>

<mx:HBox horizontalAlign="left" paddingLeft="5"
height="511" width="768">
</mx:HBox>
<mx:Button alpha="0" buttonMode="true" x="648" y="6"
click="this.parentApplication.showPreviousStep(0)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="711" y="6"
click="this.parentApplication.showNextStep(2)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="651" y="529"
width="58" click="this.parentApplication.showPreviousStep(0)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="712" y="528"
width="54" click="this.parentApplication.showNextStep(2)"
height="24"/>
</mx:Canvas>
// following is the code for page3 (step3) component
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step3.jpg" >

<mx:VBox width="763" height="668">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="10"
click="this.parentApplication.showPreviousStep(1)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="10"
click="this.parentApplication.showNextStep(3)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" label="Back"
x="625" y="590" width="58"
click="this.parentApplication.showPreviousStep(1)" height="24"/>
<mx:Button alpha="0" buttonMode="true" x="694" y="590"
width="68" click="this.parentApplication.showNextStep(3)"
height="24"/>
</mx:Canvas>
// following is code for page4 (step 4),
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step4.jpg" >

<mx:VBox width="762" height="792">

</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="644" y="15"
click="this.parentApplication.showPreviousStep(2)" width="61"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="708" y="16"
click="this.parentApplication.showNextStep(4)" width="53"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="644" y="710"
width="58" click="this.parentApplication.showPreviousStep(2)"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="703" y="710"
width="54" click="this.parentApplication.showNextStep(4)"
height="24"/>
</mx:Canvas>
// Following is code for Page 5 (step 5 ) component.
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()"
backgroundImage="assets/Step5.jpg" width="778"
height="600">

<mx:VBox paddingLeft="170" paddingTop="170" width="778"
height="522">
</mx:VBox>
<mx:Button alpha="0" buttonMode="true" x="654" y="41"
click="this.parentApplication.showPreviousStep(3)" width="72"
height="24"/>
<mx:Button alpha="0" buttonMode="true" x="654" y="486"
width="72" click="this.parentApplication.showPreviousStep(3)"
height="24"/>
</mx:Canvas>
I am getting vertical scrollbar for page3 and page4,
please tell me how to avoid this, Is their any other method
to do this.
Following is the link for my above code
http://www.emantras.com/flexdemo/sample.html
in this application one more problem is also their,
background image loads very slow, before it loads all the flex
components will load. So when you open this please wait till
background image loaded, to move to next and back pages.
Thanks for your time and consideration.
Regards
Avanthika

How to Create a system in VC

Hi,
I wanted to know how to create a system in VC without integrating with NW04s?
when i click on Find data i am not getting any list in systems.
Please let me know how can i get it
Edited by: Kavitha Bhat on Feb 11, 2008 12:04 PM
Edited by: Kavitha Bhat on Feb 11, 2008 12:05 PM

hi kavita,
Go to Tools->Options
1) Uncheck (Mask unsupported features).
2) Try changing Runtime to Dynpro.
Hope this will solve your Prob.
Awards will be welcomed!!!!
Regards
parth
Edited by: Parth on Feb 12, 2008 3:13 PM
Please close the thread is your question been answered

How to create help for java application

Thanks very much for any suggestions how to create help file for java application

how to set up the environment variable JAVAHELP_HOME

How to create Help views

How to create Help views in sap

Hey good day,
Refer to the following links, it will help you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed13446011d189700000e8322d00/content.htm
Help View ?
Regards and Best wishes.

How to create help system in flex?

Similar Messages

Maybe you are looking for