How to create HFM extended analysis's dsn
I have configure my DSN info in HFM server, but I still can't see any dsn in the HFM extend analysis. So...is there any other step to create HFM extended analysis's dsn? Thank you
This depends on the version of HFM you use. In all cases you have to change the HFM server configuration, either by running the HFM Web and Server configuration utility in versions prior to 11.1, or in 11.1.x you must run the EPM Configurator and choose to reconfigure HFM on each HFM application server. In the dialog boxes you will see a field that allows for a DSN for extended analytics. Fill that in, and I think you have to restart the servers afterward. Once that's done successfully, you will see the DSN listed in the extended analytics menu from the web client.
--Chris
Similar Messages
-
Andbody can tell me that How to create/generate probfitablitiy analysis,spec purpose ledger and controlling document once I created billing via vf01 and has it released to account document? Thanks.
Hi,
The documents are supposed to be created automatically. You do not have to generate them, if the relevant components were activated. Otherwise, use 1KE9 for PCA, OKBC for CO documents and GCU5 for S/L.
Regards,
Eli -
How to create an extend for dreamweaver
here is the thing,i writter same code use Dreamweaver evey day,it's so bored!now i want to create an extend for dreamweaver,how to star?
or maybe someone who can recommended me a Book,tell me the book's name,or recommended some video,thanks so much!Hi Steven,
This question may get more answers if you repost it in the Dreamweaver community (http://forums.adobe.com/community/dreamweaver) - as this forum is for questions regarding Adobe Exchange.
Here are some links which may be of interest:
http://www.adobe.com/uk/products/cs-extension-builder.html
http://www.adobe.com/support/dreamweaver/extend.html
http://help.adobe.com/en_US/dreamweaver/cs/extend/index.html
Best wishes,
Fraser -
How to create customer profitabilty analyse
hi experts,
i want to create an customer profitability analyse.
i have already read the docu in help.sap but i didnt understand it.
could somebody please tell me what i have to do step by step.
thanks in advance
QuanHi,
First go to RSA1 and click source system .Rt click your data source and select cutomization for extractor.select
Settings for Application-Specific DataSources (PI)---->Profitability Analysis->
Here you can create transsaction data souce or hierarchy data source etc.
This is where I guess you can start from.
Regards
Rahul Bindroo -
How to Create USGAAP Profitability Analysis Report
Hi Guru's.
Need help In preparation of USGAAP Profitability Report.Give me step by step process.Points will be rewarded...
Regards
Sap Guru
[email protected]Hi Guru's.
Need help In preparation of USGAAP Profitability Report.Give me step by step process.Points will be rewarded...
Regards
Sap Guru
[email protected] -
How to create a view object and attach with extended AM
Hi,
I tried to create new vo and attach this vo with the extended AM. But it is throwing error like 'PC.NAME : invalid identifier' (Actually this PC.NAME is exiting one).
Now i want to know how to create a view object similar like seeded one but with one additional condition in the where clause.
It is possible though extension, but i want to create two view object similar like seeded one, one with some other condition in the where clause
and another one with some other condition.
So for my requirement, i'll extend one VO and i'll add my condition but how to do it for second condition.
But i want same seeded VO with two different condition.
Any suggestions please,
SANSAN,
There is no need to attach the newly created VO with extended AM. You need to attach the same with the standard AM.
Regards,
Gyan -
How to create Oracle 11g DSN for database on another server
Hi,
How do i create an Oracle Database 11g DSN for a database that is lying on another server? I tried using the Microsoft ODBC Administrator tool but it gives me options only for the databases lying on my own machine.Hi,
Check this thread may it help you https://forums.oracle.com/thread/2479208 -
How is PR created in Extended Classic Scenario
Hai friends
How is PR created in Extended classic Scenario
Please let me know
Regards
KrishnaHi krishna,
Shopping cart in SRM is equal to PR in R/3.If it is Classic scenario we can customise to create PR in backend for the shopping cart in EBP , but in ECS directly PO will be created against the shopping cart in EBP and it will replicate to R/3 system.
Regards,
Baparao. -
How to create ICPReport in HFM
I am trying to create ICPReport in HFM. Is there any documentation on how to create ICP reports because there are quite a few different options in the reporting section of workspace.
Hi
Yes, U can create ICP Reports in HFM, using ICP Transaction Reports, In workspace, Administration-->Manage Documents-->Reports--> ICP Transaction Reports, there you can select the Etity, ICP Entity, Or, Accounts, Or Tolerace Amt, so based on these contents you can generate the reports. -
hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259 -
Hi I've recenty purchased a new imac + time capsule + airport express.
I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?
Michaeldetailed in terms of what focus?
here is a video guide about using the airport utility
http://www.youtube.com/watch?v=65Jv6m43eIE -
How to create a test scenario for Extended receiver agreement
HI, experts,
I tried to create a test scenario in PI7.1 / Intergration Builder, I already defined 3Operation mapping and 3Message mapping in Enterprise Builder and test good.
1 Operation mapping is reading input, and output in "ReveiverDetermine" structure.
other 2 mappings are real mapping program.
My question is how to create test scenario for it? I know I should create a "Receiver Determine" with "Extended" option, however can anybody point out a good guide with details?
thanks!Hi,
>>Hence I created 2 MM/OM and one OM/MM (OM3) which uses ReceiverDetermine structure as the target.
You need to create only one OM (add one source interface and two target interface in this) and in that use one MM (add source MT and add the 2 receiver MT in the signature tab of the MM )
>>One bussiness component
One BC for Source and One for target
>>One Receiver Determine (set extended option and select the OM 3 ?)
Yes
>>One sender aggrement
Yes
>>Two or Tree Receiver aggrement
Two Receiver Agreement
Also check this wiki page for step-by-step guiide
https://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards
Suraj -
How to create a DSN Less Connection using MySQL
Hi All
How to create a DSN Less Connection using MySQL?
http://www.caucho.com/projects/jdbc-mysql/index.xtp and downloaded Caucho driver and installed the jar ---- caucho-jdbc-mysql-0.2.7.jar in my classpath..
this is how i embedded the code
try
driver = (Driver) Class.forName("com.caucho-jdbc-mysql-0.2.7.Driver").newInstance();
catch (Exception e)
lastErr = "Cannot load the driver, reason:"+e.toString();
nothing seems to work with code..
Unable to proceed..Any piece of code would be of great help..
Thanks and regds
GautamAccording to the installation instructions for that driver:
The driver is com.caucho.jdbc.mysql.Driver
The url is jdbc:mysql-caucho://hostname:port/database
You used something else for the driver name. So it doesn't work. By the way, I found those instructions here: http://www.caucho.com/projects/jdbc-mysql/ -
How to create odbc (dsn) connection for OBIEE AND INFOR in unix environment
Hi,
we are establishing OBIA in Unix environment we set all the things fine but we are getting problem how to create ODBC connection
for INFORMATICA AND OBIEE. I searched some blogs thats telling there is a ODBC.INI file we need to configure.
but i am not getting clear idea to give parameters and it will not showing any TNSNAME ..........etc
please any body give clear idea about how to create ODBC connection and LOCATION of that file AND parameter which i need to give.
Thanks,
charan....Hi Dpka,
yah i already checked that one but i have not find out any parameter for TNS NAME information.
is OBIEE connected to ORACLE DATA BASE without giving TNS information?............in UNIX OPERATING SYSTEM.
pls give me the clear idea abt how to connect OBIEE, INFORMATICA to ORACLE DATA BASE IN UNIX ENVRNMENT
thanks,
charan. -
How to create a DNS? How access to Micr. Acces DB?
This is because i wish to conect to a DB of Microsoft Access....
I have found that i need to create a System DNS...but i dont how to create it....Could somebody help me please?
I have found that with the following servlet i can access to the db.....but.... what is TEST?....i think that it is "@IP_address:1521:name_db"
am i rigth?
Thanks by your help....
Mary
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
import java.io.*;
public class serv1 extends HttpServlet
Connection con;
ResultSet rs;
Statement st;
public void init(ServletConfig sc) throws ServletException
try
//creating the connection
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:TEST");
System.out.println("connection established");
st=con.createStatement();
catch(Exception er)
System.out.println(er);
public void doGet(HttpServletRequest req,HttpServletResponse
res) throws ServletException,IOException
try
//retrieving the values from the table
rs=st.executeQuery("select * from sree");
PrintWriter pw=res.getWriter();
while (rs.next())
for(int i=1;i<4;i++)
pw.println(rs.getString(i));
catch(Exception e)
System.out.println(e);
}I already could reach it.....
A friend help me.....
To create a DSN:
Control panel
Admin. Tools
Source data
DSN System
New....
And fill the data
Thanks any way,
Good day!!!
Mary
Maybe you are looking for
-
Firefox 8 is using massive amounts of memory, currently 2 G with only a few tabs open.
I just upgraded to Firefox 8, but it is using such enormous amounts of memory that my computer has slowed to a crawl. According to Task Manager, memory usage is now down to 1.3G but still that's so much that it's hard to see what I'm typing. The prev
-
EXIF data filtered when exporting to Flickr
I've noticed that some EXIF data seems to be filtered out when exporting photos to Flickr via Aperture's built-in Flick exporter. For example, if I export same photo using Flickr's upload page, then using Aperture's built-in Flickr exporter, then re-
-
Data model in BW 7.0 (NW 2004s)
Hello friends. The question is about the data model in BW 7.0 in comparison with BW 3.0, 3.1 and 3.5. Is is still the same? I mean, the database tables ofcubes and ODSes, are they still the same, with the same structure, naming convention and so on?
-
DVD drive is not configured in system profiler
My dvd drive is not configured in the system profiler. This problem occurred when i inserted a dvd that couldnt be ejected or read by the dvd device. I tried every single way to eject the dvd but the dvd is still inside. Now, i have a dvd inside my d
-
hi, i have a tree, where are two levels. I need table to refresh after i select node in tree. i set table's partial trigger> tree. when i click node on first level, table refresh, but when i click node on second level nothing happend. Does anyone kno