How to create Hierarchy Variable

Hi,
Can any one please tell me (step by step) how to craete Hierarchy Variable for Prod Hierarchy?
Please do not give help.sap.com link..its very confusing and did not help me at all.
Thanks

Hello Shalini,
         You need to follow the below steps
For hierarchy
1)     To create a hierarchy variable, you need to select the characteristic with the hierarchy. Go to the hierarchy tab in the object properties. Select hierarchy -> Hierarchy variable.
2)     Go to select hierarchy variable and new variable.
3)     Give technical name and description, and other details as per requirement.
4)     Save the variable and select the variable.
For Hierarchy node variable
1)     To create a hierarchy node variable, Select a characteristic which has a hierarchy. Select Restrict from the context menu. Select Variable in the Select value list box. Select create new variable.
2)     Give technical name and description and other details as per requirement. Select type of variable as HIERARCHY NODE
3)     Save and select the variable.
Hope this helps,
Regards.

Similar Messages

How and where will we create " hierarchy "variables?-urgent

hi,
how to create hierarchy variables?
where they will be seen while creating a query?
plz tell in detail..
Message was edited by:
neeraja devi

Hi,
Refer this
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db07d555411d189660000e829fbbd/frameset.htm
When you maintain a local variable for a hierarchy node, you only need to enter the replacement type. If you want, you can also enter an identifier for the variable. For variables for hierarchies, you can only maintain an identifier, since replacement is automatically mandatory.
When you maintain global hierarchy variables and choose replacement type "2" (replacement by manual entry), be sure to enter "3" (Mandatory variable which is not blank (technical)) in the field Optional entry.
Hope this helps
Regards
Karthik

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to create a variable in BEx 7.0

Hi,
Can anyone please tell me how to create a variable in BEx 7.0
In 3.5, when we right click on a characteristic, we used to get an option for restrict.
I cant find any such option in 7.0

Hi,
Right click on the characteristic 0CALMONTH in the default values or drag it to char. restriction section and say restrict.Pull the drop down menu in that to select variables. There u will get a create icon.Click on that...then in details tab u can specify whether mandatory,interval and all..
Regards,
Rathy

How to create Presentation variable for columns and to use it in Narrative?

Hi All,
Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
Thanks in Advance
Thenmozhi

Hi Satya,
I just want to create a table that should horizontally display the values like below:
     SUID Tag # :123456               Year Mfg: 2007
     Description: computer corporation FA ID#: 4576
     Model Number: 4569 hESC: #ert
     Serial Number: 78945 Flags: c
Department: Hematology
User: thenmozhi
Database: OLAP
I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
     SUID Tag # :678901               Year Mfg: 2008
     Description: Computer Manufacturing FA ID#: 4577
     Model Number: 4570 hESC: #eth
     Serial Number: 78946 Flags: G
Department: Hematology
User: Rehman
Database: OLAP
Thanks
Thenmozhi

How to create selection variables on the KF

Hi,
i need to create a variable on the CKF and the user is going to give the selections like >90% or <100% in the variable screen before runing the report.on the report should show the values based on the selection.
1.how to create the variables on the CKF.
2. how to restrict the values and give the selections(like >90%,<100%) values in the selections.

Hi Venkat,
You can achieve this by the following way:
1. Create a CKF or a local formula(based on which queries it needs to be used)
2. Then go to BEX Query Designer -> View -> Conditions
3. Create New Condition -> select 'New' -> Select your CKF/Local Formula -> Define your Operator ( BT, GT, LT, Top % etc.) -> Create a Formula variable (Ready for input with Processing type as ;manual Input')
4. DO the char. assignement for the condition with your condition definition
4. Execute the report with your values.
This will solve your prob.
Cheers,
VA

How to create hierarchy across more than one dimesion

Hi experts,
How to create hierarchy on more than one dimension in SSAS.please guide me.
Thanks

Hi ,
This is not Possible without making changes in the cube design .i.e;
Using Join for have to create one dimension with all attributes that you require in dimension .
Lets say you have
Dim1
att1
att2
att3
Dim2
F1
F2
You need Hierarchy as below;
Hier
att1
att3
F2
1. Add one Table in DSV using Join between both the tables.
2.Create Dimension using this newly added table.
3. Create hierarchy
https://www.simple-talk.com/sql/reporting-services/implementing-user-defined-hierarchies-in-sql-server-analysis-services/
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

For Mayank Guptha : how to create formula variable in IP

Hi,
How to create formula variable, such that it will appear in the variable screen.

Hi,
the variables you create in formula function are local to the function.
Ex., DATA CST_ELMNT TYPE 0COSTELMNT.
DATA QTY TYPE 0QUANTITY.
To get the variables listed in the variable screen you need o create variables at aggregation/filter level for the required characteristics.

How to create hierarchy on bi7 by using dtp

how to create hierarchy on bi7 by using dtp

Hi Deba,
Procedure to create Hierarchies:
1.      In the Data Warehousing Workbench under Modeling, choose the InfoObject tree.
2.      If you have assigned the hierarchy basic characteristic to an InfoObject catalog, select the corresponding InfoObject catalog for an InfoArea.
If the hierarchy basic characteristic does not belong to an InfoObject catalog, choose the InfoArea Non-Assigned Nodes and the InfoObject Catalog Non-Assigned Characteristics.
3.      Select the characteristic for which you want to create a hierarchy and choose Create Hierarchy from the context menu. The Create Hierarchy dialog box appears. The InfoObject name appears by default.
4.      Enter a hierarchy name and description (short, medium, long). Other fields may be displayed, depending on which hierarchy properties were selected for the hierarchy basic characteristics
Fields used to enter the Validity (valid to, valid from) for the hierarchy property Total Hierarchy Time-Dependent
Fields used to specify the Hierarchy Version for the hierarchy property Hierarchies Version-Dependent.
5.      Confirm your entries. The Maintain Hierarchy screen appears. You can define the structure of a hierarchy here.
6.      To create a hierarchy node, you first need to choose an insertion mode: Insert as First Child or   Insert As Next Neighbor (see Hierarchy Editing Functions).
7.      Choose the type of node you want to create: Text Node, Characteristic Node, <Hierarchy Basic Characteristic Node> or Interval (see Hierarchy Nodes)
8.      Repeat this procedure until the hierarchy structure has been set. For more information, see Modeling Nodes and Leaves.
A hierarchy can contain 50,000-100,000 leaves at most. If your hierarchy is larger, you should insert a level that is used as a navigation attribute or preferably as a separate characteristic in the dimension table.
9.      You can use Level Maintenance and Hierarchy Attributes to set how the hierarchy is to be displayed and processed in reporting (see Level Maintenance and Hierarchy Attributes).
10.      Save the hierarchy.
11.      Activate the hierarchy. See Editing Hierarchies.
For more info
[http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a6736e07211d2acb80000e829fbfe/content.htm]
[http://help.sap.com/saphelp_nw70/helpdata/EN/e6/951d102a6c11d5b2e40050da4c74dc/content.htm]
Regards,
Rajkandula

How to create replacement variable

Hi,
Any one has idea how to create replacement variable in bps.
I need to pass one variable value to another.\
Because both the fields are fields to be change. But user does not want to do double entry.
So need to pass one value from another. Is there any way. I can fix this issue.
Thanks
Naman Shah

So far not found any answer so closing

How to create the variable variant in process chains for ip

how to create the variable variant in process cahins for ip

Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar

How to create dynamic variable in HANA

Hello experts,
Please help me on how to create dynamic variable in calculation view.
Ex: variable automatically should take YTD, or MTD values so that I can directly consume column in BW on hana or BO reporting.

Hi ,
Not sure on what are looking for. Have a look on the below blog once, if this is what you are looking out for:
Applying YTD in SAP HANA with SAP BO Analysis Office
Regards,
Krishna Tangudu

How to Create Hierarchy

Dear Experts!!!!!!!!!!
Can some one explain me in detail, how to create hierarchy.
both internal and external hierarchy,methodology,steps.................
Thanks in advance......
Regards,
Suman.T

Explain the steps to load master data hierarchies from R/3 system.
A summary of the steps are as follows:
1) Goto Hierachy tab in infobject on to which your loading Hierachy data.
2) Select With Hierarchies.
3) Select Hierarchy Properties ( Time Dependent or not time depen..etc..)
4) Click on External Chars in Hierarchies, in that select the characterstics on which this Hierarchy is depending.
5) Then Create Infosource, assign Datasource.
6) Create Infopackage, to load Hierarchies.
7) Hierarchy section tab in Infoapackage select load Hierarchy and refersh the Available Hierarchies from OLTP, If it is Time dependent select time interval in update tab.
8) Then start the load.
If you want to load from Flat file, some what different way to do it.
It is normally done by the following:
Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor customizing. In extractor customizing, you can access the corresponding source system in the source system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business Information Warehouse --> General Settings --> Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual DataSources. You can determine the size of the data packet, the number of parallel processes for data transfer and the frequency with which the status IDocs are sent, for every possible update method for a DataSource.
To do so, choose Scheduler --> DataSource --> Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you want to update master data in dialog mode, smaller packets ensure faster processing.
Thanks,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

How to use hierarchy variable.

Hi all ,
In 0Account I have four hierarchies , please tell me how can I use all these 4 hierarchies in a single BEx query.
Presently I am able use only one hierarchy .
With regards

Hi,
If u want the user to be able to choose 1 of the 4 hierarchies, in the hierarchy tab of the properties of 0ACCOUNT in BEx Query Designer, click on the white button beside "Select Hierarchy" and then on the white button present against the drilldown for Hierarchy Variables. Create a new variable there & then select it from the drilldown. You should then be able to use the variable & select 1 of the 4 hierarchies.

How to create Text Variables in BEx Query Designer

How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.

Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman

How to create Hierarchy Variable

Similar Messages

Maybe you are looking for