How to create Hulk, Demon, Alien Effects In After Effects

Hello Every-one.
How can I create Hulk, Demon, Alien Effects, for the face in After Effects.
Thanks
Simon

This Video Co-Pilot tutorial is a good place to start,

Similar Messages

How to create a "fast forward" effect?

Hi there,
I want to create a fast forward effect of a section of video that I have. I have speeded up the section to 2000% normal speed, and added a noise effect. That looks ok.
Now, ideally, I would like to perfect the effect by adding the classic ">>" fast forward image, flashing on and off, and also by having the audio sounding sped up also.
Can somebody please offer some guidance on how to go about that?
Thanks very much guys,
Mike

Try here:
http://discussions.apple.com/thread.jspa?messageID=5607076&#5607076
It's for rewind but the idea is there.
Al

How to create the same title effects as in this video?

How do I create the same title effects as in this video?
By titles I mean the ones that say Exterior Front, Exterior Back, Foyer, etc...
http://www.youtube.com/watch?v=TEKcasQAuaY
I don't know how to have the black bar slide in, then have the word slide in, then have both slide out.
I'm totally new at Premiere.

It didn't appear that the words were sliding in. Rather, they were being wiped on.
Information on using the Titler is here.
Since you're new to Premiere Pro, you should begin at the beginning and work through the basic learning materials for Premiere Pro.

How to create the "300" Movie Effect in FCP

Would be eternally grateful if someone could tell me how to create the 300 movie look in Final Cut Pro. I've scoured the Interwebs for a tutorial with no luck.

I think it's not as hard as people think, it just looks intimidating because there are no popup windows. Everything in the interface is on the top of the rooms. Just think if FCP had things this way...
I learned to use color in a class in Cupertino (I'm a certified trainer in Color and FCP) but gotta say, it's just not "Mac-like" in it's interface. It was originally written for Unix as was Shake, so they look similar... but they really aren't that hard to learn. The certified training course in Color is only a 2 day affair. I could teach anybody color on a one on one in one day. Doesn't make them a colorist just as learning FCP doesn't make them an editor... but the buttons? yep 1 day.
FCPs full training is 8 days for full level 2 certification, and even then, it doesn't cover everything you could do in FCP...
I teach a 15 week course in FCP and STILL don't have time to teach it all. So what's easier to learn? Color.
Jerry

How to create a rollover button effect in Captivate 7?

Hi,
I recently upgraded from Captivate 6 to Captivate 7 and am curious to know how I can create a rollover state for a SmartShape button. Basically, let's say I have a SmartShape being used as a button. What I want is to have the button have a glow effect and a shadow effect each time the mouse is hovered over it. Is there an easier way than having two objects on the slide -- one as the normal state and one the mouse hoever image. What I'm thinking is that the mouse hovered state image will have it's 'Visible in Output' set as unchecked and I can use an Advanced Action to show the object on mouse hover. Perhaps I can have the mouse hovered state image as a rollover SmartShape too?
Nonetheless, this looks like too much work. If I have 10 clickables on the page for which I want rollover effects, I would need to have 10 additional objects with their rollover states -- just seems like too much, but perhaps that's the Captivate way. Or I am I missing the obvious?
Any help would be appreciated.
Thanks,
Sean

Most people would say the easiest way to achieve what you are talking about would be to just create your own custom image button in a graphics editor and give the Over state image having the glow effect that you want.
If you decide to go that route, this tutorial describes the process of creating an image button:
http://www.infosemantics.com.au/adobe-captivate/create-custom-image-buttons
Another possibility is that you can use the Infosemantics Event Handler widget to trigger an Apply Effect action and use the Glow filter as the effect.
However, this may require some tweaking since it's not that easy to time effects that are applied via an advanced action.

How To Create a Drunken POV Effect?

hello,
i am making a point-of-view 3d video and i would like to know about how i could make an effect that will show that the one that we are seeing through his eyes, is drunk.
i am searching for something that will show blurry, slow rem and generally, something to show you are totally drunk .
thanks, a lot....!!!
p.s. no matter what the version of your after effects, tell me..

As David said, this is a very subjective matter and it really depends on how you want it to look and feel. Do you want it to look slapstick like a silent film or serious? Perhaps some examples might be useful in illustrating what you want. In the meantine, I'll post the ones that popped into my head.
If you're after slapstick, then Edwin S. Porter's "Dream of a Rarebit Fiend" from 1906 is a gem of early cinema that uses some very interesting in-camera multi-exposure effects to create a drunken feel. This could be re-created very easily in After Effects, especially the POV/Long Shot that happens at approximately 1:16.
You could do this by just simply overlaying two wobbling camera shots or using the wiggler plug-in in After Effects like so:
Or, if you're going for more serious look, then I would suggest watching Gaspar Noe's film, "Enter the Void." The entire movie is a floating POV that spans multiple characters, spaces and time. It also depicts a lot of substance abuse, including but not limited to alcohol. One of the things that I think adds to the uncanny realness of the film are the sporadic eye blinks that occur throughout the movie. This could be recreated by quickly animating 2 black solids over a couple frames. You could also speed this up or slow it down depending on your character's drunkness.
Also, you said you're making a 3D video. Are you talking about stereoscopic 3D or are you just making 3D layers in After Effects? If it's stereoscopic 3D then playing with the interocular distance and the camera convergence might yield some interesting results, but I'm not sure it would seem drunken.
Otherwise, I'd just experiment with the different effects mentioned earlier. Again, depending on what you're after, I'd also add CC Wide Time to the list.

How to create an eye opening effect?

I am helping my students with a video. They want to start with a black screen then apply an effect of some sort that looks like an eye is opening from being unconscious or asleep so the video is a little blurry at first. I know how to blur, but I'm not sure how to make the eye opening transition happen. It would be cool if you could see the video in the eye and have it zoom to full screen, but I'm not sure if that is possible in Premiere. Any ideas and suggestions would be appreciated! Thank you!

> They want to start with a black screen then apply an effect of some sort that looks like an eye is opening from being unconscious or asleep so the video is a little blurry at first. <
The convention for indicating someone regaining consciousness depends on the point of view. Is the audience in the victim's head or are we watching their face? If we're in his head, a slow fade up to a blurry image is all that is required to communicate to a viewer what is going on. A simple split vertical wipe , perhaps with with some clever masking as suggested by Kevin, is possible. The addition of a wipe, however, is an affectation; it's only justifiable in the context of the rest of the film's effects and style.
> It would be cool if you could see the video in the eye and have it zoom to full screen, <
This describes the reverse POV; we're watching the person recover. Kevin's wipe works for this and you can place the video, which I assume is the sphericaly distorted image of the room or environment as it would be reflected in the cornea, on top of the image with Premiere or After Effects. You will need to track the image, though, to nail it to the eyeball.
The questions raise more questions about the storyline and the style of the production than it does about technique required to pull it off successfully.

How to Create and export motion data from After effects CC to Flash CC

Hi there ,
Basically what I've got here is as follows.
I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
and also to give a motion data to be used in Flash CC - to assemble the original animation.
Can anybody help me out with this?

Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
Here's more information:
http://forums.adobe.com/message/5555577
Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

How to create a Zoom like effect?

Hello,
I have a Pane right now that I am drawing lines inside of. Its actually drawing coordinates coming back from my hardware device (a cnc controller).
What I would like to be able to do is mouse wheel in (or out) and only see a portion of the pane. Scaling does not seem to fit my need. Perhaps there is nothing out there like this? I am sorry if this is not clear. Here is a picture of my GUI.
http://www.flickr.com/photos/rileyporter/8451829160/in/photostream
The pane is the red dashed outline. I would like to place my mouse say over the top of the green line... Mouse wheel up and have the red dashed lines stay where they are at, however only seeing the top of the green line filling the whole red dashed outline. I am not sure what / how to achieve this effect.
Does that make sense?

Scaling does not seem to fit my need.Why not?
Can you describe in more detail what you tried, how you implemented it, how it behaved and how that behaviour differed from what you need?
Perhaps supplying a simple, sample test case of executable code as well might help get your question answered.

How to create a spray foam effect?

Hello
I am trying to create a foam fire extinguisher effect. My video depicts a woman miming with a fire extinguisher (spraying back and forth with the nozzle) and now I am being asked to supply the foam ("fix it in post"). I have created a motion tracker for the nozzle and have tried various emitters with only limited success.
Do any of you Motion gurus have a secret recipe for a spray of foam?
Thank you!

Try: Content > Blur 11 (or one of the others) >Apply
Add Emitter
Set 3D
set Lattitude to 90 degrees; Longitude 0; Emission Range about 30
Check face camera
Birth rate: start around 75
Life around 8 or so? (after you scale the effect to fit, set it high enough to go as far as needed)
Set speeds rather high (3500?)
Spin Randomness if you like
Use Properties to orient (and Scale) the emitter in your scene [optionally, resize the Blur image smaller]. Start with Rotation X around 110 (should be streaming at a slightly downward direction); Rotation Y for left/right motion. You should be able to figure out the rest.
You can also add a Gravity behavior (affect subobjects) set quite high (start around 2000) to pull down the end of the emitter.
If you need it to "stick" places, investigate the Attracted To behavior (in Simulations—and use "null objects" [opacity 0] arranged in your scene.)
Cross your fingers, hope for the best

Does anyone know how to creat the Pop Art effects of Warhol in PSE 11 ?

I believe it was PSE 9 or 10 and I took one B&W graphic and applied a plugin or filter and the result was four copies of the graphic in these wild Neon colors all in one frame ... Now I have misplaced the final work and am unable to recreate with PSE 11 ... Any one know what I am talking about and how to recreate the effect

Guided Edit>Photo Play>Pop Art

How to create a ripple 3d effect using photoshop cs4

Hi,
Can any one help us or guide us to create 3d ripple design [link removed by host] for homepage.?
Thanks in advance
Cinas

Cinas,
Must it be in Photoshop? It might also be in Illustrator, to mention an obvious alternative.
An image hinting at what you want would help the helpers.

How to create extra partitions for windows 7 after installing boot camp

hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank you

Last login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

How to create a aspx page that expires after first use

I want to create an ".aspx" page in VB that will expire after the first use or 30 minutes
This is to add a password reset page onto our one of our apps.
Thanks

I want to create an ".aspx" page in VB that will expire after the first use or 30 minutes
This is to add a password reset page onto our one of our apps.
Thanks
Hi,
Based on your replay in another thread about sharepoint, maybe you are asking the way used in sharepoint, then I would suggest you consider posting this issue in
sharepoint forum to get supports.
If not, then you could post this issue in the forums Mr. Monkeyboy suggested.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do you create a mirror image effect on imovie 2014?

All the tutorials online show how to create a mirror image effect on imovie 2011, however there are none showing how to do it on the current version.

You can't do this in iPhoto.
In order of price here are some suggestions:
Preview, already on your Mac.
Seashore (free)
_[The Gimp|http://www.gimp.org/macintosh>_ also free
Graphic Coverter ($45 approx)
Acorn ($50 approx)
[Pixelmator|http://www.pixelmator.com> ($60 approx.)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

How to create Hulk, Demon, Alien Effects In After Effects

Similar Messages

Maybe you are looking for