How to Create Hyperlink in Button?
I created a button. In the Up-Over-Down-Hit area, I created 2
more layers with a keyframe in Over so the button changes color and
makes a sound upon mouseover. Now I want it to go to another
webpage when clicked. I'm using Actionscript 3 and I can't seem to
figure out this simple task.
Just use action script 2 and place code on the button:
on(press) {
getURL("
http://www.adobe.com", "_blank");
or frame action
btnInstanceName.onPress=function() {
getURL("
http://www.adobe.com", "_blank");
}
Similar Messages
-
How to Create a Persistent button on the top HTML gallery
Hi,
In my InDesign Folio I have an article with full page HTML photo gallery. The photo grid occupies the full screen. I want to create a Persistent button on the top of this gallery which user can tap to go to the Main Menu page. This button is always visible at one place even as user scrolls up and down the gallery. I tried creating it on the top layer, and on the top layer for Master page, but the button disapperas when the HTML gallery loads.
So the user does not see any button to navigate out of the gallery to another article.
Any ideas how to create the persistent button ?
Thanks in advance.
-MPDepending on if you are using the HTML as either an article or in an overlay, you may be able to either use the standard navto and goto hyperlinks syntax or place a blank button on top of your link in the HTML.
I am not sure if using the standard navto and goto syntax will work between an HTML article and an Indesign article. Maybe Bob Bringhurst, Bob Levine, or one of the staff members can clarify. If you are using your HTML in an overlay, you can add a transparent button on top of your link or image to return to whatever page you like. -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
How To Create On Submit Button For Master_detail Page ?
I have adf page that is master And detail view.
i want to have one submit button for master and detail blockDuplicate of How To Create On Submit Button For Master_detail Page ?
Please don'r post your question multiple times.
Timo -
How to create a radio button on OA Page using Personalization
I am trying to create a radio button on OA Page using Personalization. The item style , I can see is Message Radio Group.
How to create Message Radio Button and bring them under one group.
ThanksYou should use jdev to define a radiogroup and radio buttons under that, wrap that definition inside a stackLayout in jdev, use personalization to add a stackLayout and extend the region which you had created earlier in jdev.
-
How to create a custom Button in a SNP planning book
Hi Experts,
I created my own Planning Book and Dataview in SNP with 3 Key Figures: KF1, KF2, KF3. Now I want to create one my own button with Macro so that when I press that button, the Macro will run to calculate: KF3 = KF1 + KF2.
I know that I can drag this Macro to one of default events like: Default, Level Change, Start. But actually, I want to create my own button so that I can handle the event as I want.
My question are:
1. How to create a custom button on the toolbar of SNP Planning book and writing macro for the button?
2. Please give me any document, material teaching about writing macro and relating to my above scenario.
Thanks very much!
Duyennx
Edited by: xuanduyen on Sep 6, 2011 9:20 AMHi,
Access the transaction "/n/sapapo/advm". In the list select your planning book/ data view and click 'Start Macro Builder' button.
In the Macro builder screen, drag and drop your macro from Macro depot to the work area.
Right click on your macro name and select 'properties'. In the pop up, next to the Assigned Push button field, there is a button 'Choose'. Click that. It will display all the available icons. In standard system, it displays more than 1000 icon. Choose any one icon which is suitable for your macro function. Close the pop up and save the macro. This will assign a push button to your macro.
In the Planning book tool bar, you can see the selected icon in the header tool bar. Just by clicking that icon, you can execute the macro interactively.
And I don't know whether we can include/design our own icon. But there are already 1000+ standard icons to choose.
Regards,
Manimaran M. -
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
How to create multiple toolbar buttons in jsp ?
hi all,
how to create multiple toolbar buttons in jsp ?
plz help memgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes. -
How to create a custom button/ double button
First of all I am relative new to
Java 2D programming; therefore,
I am seeking some help and advice of
how to create a complex double button
a big one which is responsible for
the use case and a small one which
will show some help text if pressed.
| |
| Use Case _____________|
| / |
| | Help Case |
| | |
\ | /
A 3D effect should distinct and signify whether the Use Case
button area or Help Case button area is pressed.
I am looking for some example or best practice that
explains to me how to create a double button
so that it can carry or depict at least a:
1) Title
2) Subtitle
3) Pictogram (Graphic Icon)
4) Round or organic borders
5) 3D effect
Thanks in advance.What you are asking here is something complex enough that nobody is going to explain it to you in one forum post. We are talking about creating your own custom button component. I would suggest you check out the book [Filthy Rich Clients|http://www.amazon.com/Filthy-Rich-Clients-Developing-Applications/dp/0132413930/].
-
ZLM00: How to create the logout-button?
LS.,
I am creating my own LM00 screens which work fine. There is one button hat I still have to add: LOGOUT.
Of course I can create the button and give it a functioncode, but what do I have to let it do to make the user logout?
I tried functions like:
EXIT, LEAVE TO SCREEN 0, LEAVE PROGRAM, LEAVE, RETURN, STOP, CALL TRANSACTION '/NEX'.
Also I tried to debug the original LM00 transaction, but it is not debuggable using /h /hs or /he.
I have also searched for function modules that log the user out, but did not find any.
Anybody any idea how to create the logout-button?
Best regards,
Tim van Steenbergen.Got it.
Functionmodule SAPGUI_SET_FUNCTIONCODE does some part, but only works for a dialogsession. When trying this on a scanner, it did not do anything because this interface does not have a transaction box to enter the functioncode in.
The trick that worked was call 'SYS_LOGOFF'. -
How to Create a radio button?
How to Create a radio button with the label Maintenance of RSDDTREXHPAFAIL tab".Once the user chooses this then there will two options
Create and Delete.Table has three fields.When user chooses the create button then it should create a new entry and delete should delete an entry. If the entry exist then create should overwrite an entry. There is no update.hi...
the sample code below should help you .....
parameters:Maintenance of RSDDTREXHPAFAIL tab radiobutton group grp1.
this will create the radio button on the screen with the lable required.
now in the user command of the screen ..
PROCESS AFTER INPUT.
MODULE user_command_0100.
MODULE user_command_0100 INPUT.
*assigning the sy-ucomm value to ok_code
ok_code= sy-ucomm.
*clear the sy-ucomm
CLEAR sy-ucomm.
CASE ok_code.
*when user presses CREATE button
WHEN 'PB_CREATE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
here write query to fetch data into the internal table
and then use modify command to modify the database.
endif.
*when user presses CHANGE button
WHEN 'PB_DELETE'.
if Maintenance of RSDDTREXHPAFAIL tab = 'X'.
HERE write the delete query.
endif.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
<b>plz reward pts if helpful.</b>
regards
vijay -
How to create hyperlink on column.
Hi all,
its very urgent.
I have two pages first page like header level and secound page like lines level.
in first page having requestid lov,find,create buttons and advance table region.
secound page having only advance table region with add another button and save button.
in first page, once click on the create button one requestid(header) is generated in header leval and at the same time that requestid move to secound page requestid column and user select the application name and responsibilityname and user click on the add another row button it ll add one more row with same requestid and here user again enter application name and resp name and click on the save button the data insert to two different tables.header information insert to one table and line information insert to another table.
here my problem is in first page having requestid lov and find button. the user click on the find button all the requestids displayed in advance table region(this is only header information).once user select particular requestid and click on that requestid, it ll displays particular requestid line information to next page.
how to create link on requestid column.
how to achive this plz help me.
ThanksHi Mukesh,
Thanks for replay.
here my requirement is i have two pages in firstpage having requestid lov,go button and table region.
once click on the GO button it ll display all the requestids(only header table information) these requestids are having hyperlink.
one requestid(header) having multiful requestids(lines)
once click on the particular requestid and go to next page here displays the line information.
so i created one destinationURL, and in secound page CO process request i wrote below code.
so plz check once.
In CO:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String employeeNumber = pageContext.getParameter("requestID");
System.out.println("this ia my link requestID:"+employeeNumber);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
Serializable[] parameters = { employeeNumber };
System.out.println("this is my link serizable requesid:"+ employeeNumber);
am.invokeMethod("initDetails", parameters);
in AM:
public void initDetails(String employeeNumber)
RequestAccessDetailsVOImpl vo1 = getRequestAccessDetailsVO1();
System.out.println("my emp number AM:"+employeeNumber);
vo1.setWhereClause("REQUEST_ID = :1");
vo1.setWhereClauseParams(null); // Always reset
vo1.setWhereClauseParam(0, employeeNumber);
System.out.println("my emp number AM1:"+employeeNumber);
vo1.executeQuery();
once i click on the requestid(hyperlink) in home page that requestid move to secoundpageCO and AM also.
plz check the output.this output generated OC4J server.
this ia my link requestID:12590
this is my link serizable requesid:12590
my emp number AM:12590
my emp number AM1:12590
But did not displays the line information in secoundpage
plz helpme.
Thanks
Edited by: its urgent on Mar 19, 2012 10:26 PM -
How to create a rollover button effect in Captivate 7?
Hi,
I recently upgraded from Captivate 6 to Captivate 7 and am curious to know how I can create a rollover state for a SmartShape button. Basically, let's say I have a SmartShape being used as a button. What I want is to have the button have a glow effect and a shadow effect each time the mouse is hovered over it. Is there an easier way than having two objects on the slide -- one as the normal state and one the mouse hoever image. What I'm thinking is that the mouse hovered state image will have it's 'Visible in Output' set as unchecked and I can use an Advanced Action to show the object on mouse hover. Perhaps I can have the mouse hovered state image as a rollover SmartShape too?
Nonetheless, this looks like too much work. If I have 10 clickables on the page for which I want rollover effects, I would need to have 10 additional objects with their rollover states -- just seems like too much, but perhaps that's the Captivate way. Or I am I missing the obvious?
Any help would be appreciated.
Thanks,
SeanMost people would say the easiest way to achieve what you are talking about would be to just create your own custom image button in a graphics editor and give the Over state image having the glow effect that you want.
If you decide to go that route, this tutorial describes the process of creating an image button:
http://www.infosemantics.com.au/adobe-captivate/create-custom-image-buttons
Another possibility is that you can use the Infosemantics Event Handler widget to trigger an Apply Effect action and use the Glow filter as the effect.
However, this may require some tweaking since it's not that easy to time effects that are applied via an advanced action. -
How to create a radio button that changes colors
I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked? -
How to Create a Back button in Flash
Hi all,
I need to create a back button for my flash app. It doesn't
need to be connected with Browser. It just need be able to remember
what frame they were viewing, and bring them back.
Is there any event I can use for this? I made an variable
called "visited:Number" and change it on every frame, but this
won't work. Once the user enters a new frame, the original visited
number is replaced by current already. I don't know how to hold
that number, before they leave the current frame.
Can anybody give me little clue/direction please?
Thank you...Hi
I believe that you should look at the Forms functionality for UCM . Under Content Management - Web Form Editor will show up the editor where in you can add buttons and attach functionalities to it . With UCM 11g this is not available thus you might need to use AJAX to build the requirement .
Thanks
Srinath
Maybe you are looking for
-
Hi Friends, I am trying to run Quick Pay for an employee. I have put the dates and then saved it. Now when I click the Start Run button nothing happens. I click on the Override Payment method field and see this error "APP-PAY-07263: Choose a Quick Pa
-
ECC6.0 WebDynpro(ABAP) - raising terminating event
Hi, in ECC6.0 I have a custom WDA application with a custom workflow. The workflow is launched via an event that is raised in the WDA application. However, at one point workflow sends a link to one of the WDA pages, whereby the user clicks a button
-
IT0027 Costribution - More than 8 entries not allowed
Hi all, I have an issue with IT0027. We work on ECC 6.0 release 700. For infotype 27( Cost Distribution ) able to give only 8 entries in table control. I cannot add more than 8. Even the + and - buttons for table control are also on the Tool bar. I
-
I want to download OracleLite for Windows CE. I do not find Oracle 10g Lite for Windows CE on OTN. Then I go to Oracle 9i Lite with the following link. http://www.oracle.com/technology/software/htdocs/devlic.html?http://www.oracle.com/technology/soft
-
PS4 random beep during gameplay
Just recently whilst playing Witcher 3 and Advanced Warfare Ive started to get a single beep occur once randomly during playback. The beep does not come from the PS4 itself but from the speaker audio (TV or stereo). Gameplay and performance is not a