How to create Idoc based on NAST entries

Hi Experts,
I have a requeriement, on successful posting of receipt i need to send an idoc ORDERS05 using objkey(PO number) of NAST table. How to proceed on this??
Regards
Sridevi S
Edited by: Sridevi Sivanandam on Aug 1, 2010 4:25 PM

hello,
please see the segment for ORDERS05 from WE30 and after that you should have an idea what kind of data you need to pass.
NAST-OBJKEY can contain PO number, article number based on the message / output type fired from GR...
please have a close look at the data being entered in that field...
after that you can relevant data from PO document for creating the IDOC.
Thanks

Similar Messages

How to create IDoc once Sales Order Invoice (Billing) has been created

Hi,
How to create IDoc once Sales Order Invoice (Billing) has been created ?
I.e Once you click on save button of Invoice , IDoc Should genrate Automatically.
Thanks.

Hi,
We need to do custom configuration for this scenario such that an output type will be attached when ever an INVOICE is created.
Refer to application V3 in NACE. The Output type should contain an entry with transmission medium: Distribution (ALE).
for example check the customization done for an output type in NACE.
Goto NACE ---> Select an application V3 ---> Click on processing routines ---> select the output type (Eg: RD00) ---> Click on Details button (CNTRL + SHFT + F2) which gives the configuration info.
For example we can generate the IDOC based on the settings in partner profiles for the customer (Sold To)
With Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Jan 29, 2009 8:16 AM

Creating idocs based on invoice number ocurrences

Hi ,
I want to create idocs based on invoice numbers .
Lets say i have a file coming in from sender system
Invoice1 material customer value
Invoice1 materail1 ..........
imvoice2 material2.....
invoice2 material1.....
invoice1 material3..
Invoice3. material4....
So for Invoice1 only one Idoc should be created similarly for invoice 2 which is ocurring twice in the file
only 1 idoc should be created
Let me know how to achieve this .. by UDF , or by split by value
please help
thnx
Chirdip

Hi,
Change the IDOC occurance to 0-unbounded.Export the xsd change the occurance and import it to external definition.
Map Like below:
invoice number--removecontext--sort--splitbyvalue(valuechange)--IDOC
other fields you need to map like below.
invoice number--removecontext--sortbykey--SplibyValue(Each)---IDOC fields
source field----removecontext------
Regards,
Prakasu.M

SD How to create IDoc once Sales Order Invoice (Billing) has been created ?

Hi,
How to create IDoc once Sales Order Invoice (Billing) has been created ?
I.e Once you click on save button of Invoice , IDoc Should genrate Automatically.
Thanks

Hello,
Go to T.code VV31 and select the billing output type and select the access sequence required and in the details screen of create condition records give all the required entries for eg: may be Billing Type, Sales Organsiation etc.and in the medium choose the option as 6(EDI) and time select as 4 that is immediately after saving the document.Also please ensure that particular partners for whom idoc should be generated they need to have partner profile setup with the billing message types. Hope this helps.

How to create idoc in real time

hi guru
how to create idoc in real time
thanks
subhasis

Hi sahoo,
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a SegmentGo to transaction code WE31Enter the name for your segment type and click on the Create iconType the short textEnter the variable names and data elementsSave it and go backGo to Edit -> Set ReleaseFollow steps to create more number of segments
Create IDOC TypeGo to transaction code WE30Enter the Object Name, select Basic type and click Create iconSelect the create new option and enter a description for your basic IDOC type and press enterSelect the IDOC Name and click Create iconThe system prompts us to enter a segment type and its attributes
Choose the appropriate values and press EnterThe system transfers the name of the segment type to the IDOC editor.Follow these steps to add more number of segments to Parent or as Parent-child relationSave it and go backGo to Edit -> Set release
Create Message TypeGo to transaction code WE81Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnterClick New Entries to create new Message TypeFill detailsSave it and go back
Assign Message Type to IDoc TypeGo to transaction code WE82Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.Click New Entries to create new Message Type.Fill detailsSave it and go back.
Reward points if helpful.
Thanks
Naveen khan

How to create Formula based value field in COPA

Hi,
I want to know how to create formula based value field in COPA
My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
factor.
anybody give some light on the same topic or requirement ?
Thanks
Nilesh R

The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
Now click the "check formuar"-button. Then save.
Before you can use the key figure in assessment, execute TC KEUG.
Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
I hope this made it clearer.
Regards
Nikolas

How to create a scenarios for duplicate entries

Hi friends,
Please help me how to create a scenarios for duplicate entries, we are using stock transfer orders from there we need to create scenarios for duplicate entries, please guide me on the same.

Hi,
F-01 can be used to create a sample document.
Regards
Aditya

How to create exchange grid in web entry form...

Hi to all,
I am new to HFM..my query is How to create exchange grid in web entry form...i try it a lot but it didn't get the solution...
i did this exchange grid in web grid..any one can share the document or ppt or video clip related to this..which will be helpful for me...
Thanks

Hi...
Its better to create the Exchange Rates in a Data Form than in an Data Grid, so that you can easily Import and Export the form and even can feed the values easily....
Select the POV like in Scenario-Actual,Year-Your particular year,Period-In Period Dimension do not choose any option so that it can be selected in Columns and Rows,View--the same as Period Dimension,Entity-[None],Value-<Entity Currency>,Account-Do Not select ,ICP- [ICP None],Custom 1-[None], Custom 2-[None], Custom 3-[None], Custom 4-[None]...
In Columns Select Scenario -Actual,Period-{[Fourth Generation]},Currency-#USD(Default Currency)
In Rows Select-Account-A#AVGRATE,View-w#Periodic,Currency-C2#EUR
A#AVGRATE.w#Periodic.C2#CFA and so on for rest of the currencies....
and same in the below rows for the Closing Rates---- A#CLORATE.w#Periodic.C2#EUR
A#CLORATE.w#Periodic.C2#CFA
This might help you.....

How to create IDOC for customer defined table

hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.

Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved.

How to create Profile Based Rule in Endeca Studio Developer

Hi,
Can anybody tell me how to create Profile based rule in the Endeca Studio Developer. and how to fecth the data in the JSP. what are the parameter required to pass in the ENEQuery
Thanks
Shailesh

I use visual studio 2012.
I dont see rule set editor which can help me create busineesss rule.
Where can I find it?
Hi Rajesh,
If you want to learn more information about RuleSet Editor in .net framework 4.5, check out https://msdn.microsoft.com/en-us/library/ee960221(v=vs.110).aspx
for more information.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create HeatMap based on Country Credit Rating?

How to create Heatmap based on Country Credit Rating i....
Credit Ratings are AAA, -AAA, +AA, AA, -AA, +A, A, -A, +BBB, BBB, -BBB, +BB....... From Green To Red
Country Credit Rating
Angola
BB-
Botswana
A-
Burkina Faso
B
Ethiopia
B-
Ghana
B
Morocco
BBB-
Nigeria
BB-
Sierra Leone
B-
South Africa
BBB
Tanzania
B
Zambia
B+
Australia
AAA
India
BBB-
Indonesia
BB+
Pakistan
B
Philippines
BBB
Thailand
BBB+
Uzbekistan
BBB
Turkey
BB+
Chile
AA-

Thanks Jim for the solution.
Also, this article should be helpful for you:
Create a Heat Map Using Excel’s Conditional Formatting -
http://peltiertech.com/heat-map-excel-conditional-formatting/
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Hi Ethan, If you trying to get points i understand but please do assume that googling is done first.
If you want to get help from others, you should first be polite to those who are trying to help you, rather than "i already new the option of converting to numbers" or "If you trying to get points i understand but please do assume
that googling is done first.".
You didn't make it clear in your initial post that what you already tried, or which articles you already reviewed, how should us people know this?
I'm sorry but here all is asked politely and please, politely do not change the subject.

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE

HOW TO CREATE PROMPT BASED ON ANOTHER PROMPT IN OBIEE.
Requiremenst is as follows.
Year ,Qtr columns in first prompt.Based on selection on these prompts second prompt should display corresponding prompts
Second prompt will have Month ,Week and Day columns.Second prompt should be hidden and based on first prompt selection second prompt should display with constraint based on first prompt.
Any help would be highly appriciated!!!

hi,
Using Guided navigation it is possible,
Please refer the below links.
http://gerardnico.com/wiki/dat/obiee/dashboard_prompt_1_eq_0
http://businessdecisionsystems.com/blog/?p=448
Hope this help's
Thanks,
Satya

How to create ajax based tabs ..??

Hi all,
How to create Ajax based Tabs (or Tab like) in a JSF page..?
Any clues..?
Thanks and regards,
Jijo

You need to write your own jsf component for this.

How to create idoc and send it frm one sap to another sap

hi,
can anyone tell me the complete procedure of creating the idoc and sending it to another sap r/3
how to create rfc destination, partner profiles, port and outbound parameter and inbound parameter
thanks

Hi Azhar,
Go through the following Links
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
        save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
   select all what ever you want and delete remaining fields.
   save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
   it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
   give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
Sreeni

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to create Idoc based on NAST entries

Similar Messages

Maybe you are looking for